• 7432 U74HC32L DIP14 OR gate

    The 74HC32 is a 14 Pin Quad 2-Input OR Gate IC. The 74HC32 provides four independent 2-input OR gates with standard push-pull outputs. The device is designed for operation with a power supply range of 2.0V to 6.0V.  Inputs include clamp diodes. This enables the use of current limiting resistors to interface inputs to voltages in excess of VCC.

    11.0015.00 inc.GST

    7432 U74HC32L DIP14 OR gate

    11.0015.00 inc.GST
  • 7408 DIP14 AND GATE 74F08PC

    74HC08 is Quad 2-Input AND Gate 14 Pin IC. The 74HC08 provides provides 4 independent 2-input AND gates with standard push-pull outputs. The device is designed for operation with a power supply range of 2.0V to 6.0V. It utilize advanced silicon-gate CMOS technology to achieve operating speeds similar to LS-TTL gates with the low power consumption of standard CMOS integrated circuits. The HC08 has buffered outputs, providing high noise immunity and the ability to drive 10 LS-TTL loads. The 74HC logic family is functionally as well as pin-out compatible with the standard 74LS logic family. All inputs are protected from damage due to static discharge by internal diode clamps to VCC and ground.

    Features:-

     

    • 4 AND gates in a 14-Pin DIP Package
    • Outputs Directly Interface to CMOS, NMOS and TTL
    • Large Operating Voltage Range
    • Wide Operating Conditions

     

     

    Specifications:-

     

    • Type: DIP Bipolar
    • Voltage Rating: 2.0 to 6.0V
    • Temperature Rating: 0 to 70Deg C
    • Number of: 14 Pins
    • Mounting: Through Hole
    12.0015.00 inc.GST

    7408 DIP14 AND GATE 74F08PC

    12.0015.00 inc.GST
  • AT89S51 DIP-40 8051 89S51

    • Power Source: DC
    • RoHS Compliant
    • Material: Silicone
    • Weight: 0.007
    85.00100.00 inc.GST

    AT89S51 DIP-40 8051 89S51

    85.00100.00 inc.GST
  • PIC16F877A-I/P DIP40 Microcontroller MCP

    The PIC16F877A is a 28/40/44-Pin Enhanced Flash Microcontrollers . The following are the features:-

    • Timer0: 8-bit timer/counter with 8-bit prescaler

    • Timer1: 16-bit timer/counter with prescaler, can be incremented during Sleep via external crystal/clock

    • Timer2: 8-bit timer/counter with 8-bit period register, prescaler and postscaler

    • Two Capture, Compare, PWM modules

    – Capture is 16-bit, max. resolution is 12.5 ns

    – Compare is 16-bit, max. resolution is 200 ns

    – PWM max. resolution is 10-bit

    • Synchronous Serial Port (SSP) with SPI (Master mode) and I2C™ (Master/Slave)

    Universal Synchronous Asynchronous Receiver Transmitter (USART/SCI) with 9-bit address detection

    • Parallel Slave Port (PSP) – 8 bits wide with external RD, WR and CS controls (40/44-pin only)

    • Brown-out detection circuitry for Brown-out Reset (BOR)

    312.00330.00 inc.GST

    PIC16F877A-I/P DIP40 Microcontroller MCP

    312.00330.00 inc.GST

Main Menu