-
-
5V DC Adapter 1 Amp (casing may vary)
AC input voltage: 100V – 240V, 50Hz / 60Hz
Output DC Voltage: 5V
Output Current: 1A
Standby power: <0.3W
₹130.00₹171.00inc.GST5V DC Adapter 1 Amp (casing may vary)
₹130.00₹171.00inc.GST -
₹59.00
₹100.00inc.GST 41% offSMD colour LED Module
₹59.00₹100.00inc.GST 41% off -
₹50.00
₹65.00inc.GST1 Channel 5V Relay Module without Optocoupler
₹50.00₹65.00inc.GST -
₹88.00
₹150.00inc.GSTRTC module clock DS1307 WITH Battery
₹88.00₹150.00inc.GST -
-
AC-DC Buck Converter step down Transformer power supply module SMPS
- AC-DC 5V 700mA 3.5W
- Precision Buck Converter
- AC 220v to 5v DC step down Transformer power supply module
₹99.00₹200.00inc.GSTAC-DC Buck Converter step down Transformer power supply module SMPS
₹99.00₹200.00inc.GST -
0.96 inch BLUE OLED Display Module 4 pin
- OLED Driver IC: SSD1306
- Resolution: 128 x 64
- Visual Angle: >160°
- Input Voltage: 3.3V ~ 6V
- Compatible I/O Level: 3.3V, 5V
- Mini Size: 2.7 x 2.8cm
- Only Need 2 I/O Port to Control
- Full Compatible with Arduino
- Working temperature: -30°C ~ 70°C
- Module volume ( generous ): 27.0 x 27.0 x 4.1mm
- Factory configured for SPI protocol (can be easily changed to IIC)
- PCB COLOR MAY BE BLUE OR GREEN
₹264.00₹300.00inc.GST0.96 inch BLUE OLED Display Module 4 pin
₹264.00₹300.00inc.GST -
L293D Motor Driver Shield for Arduino Uno
- 2 connections for 5V ‘hobby’ servos connected to the Arduino’s high-resolution dedicated timer
- 4 H-Bridges: L293D chipset provides 0.6A per bridge (1.2A peak) with thermal shutdown protection, internal kickback protection diodes.
- Can run motors on 4.5VDC to 25VDC.
- Up to 4 bi-directional DC motors with individual 8-bit speed selection (so, about 0.5% resolution)
- Up to 2 stepper motors (unipolar or bipolar) with single coil, double coil, or interleaved stepping.
₹176.00₹200.00inc.GSTL293D Motor Driver Shield for Arduino Uno
₹176.00₹200.00inc.GST -
MICRO USB to DIP Adapter 5 Pin Female breakout board module
- Power Source: DC
- Material: Plastic
- weight : 0.1g
₹17.00₹30.00inc.GSTMICRO USB to DIP Adapter 5 Pin Female breakout board module
₹17.00₹30.00inc.GST -
0.96 INCH 4PIN WHITE OLED Display Module
- Driver IC: SSD1306
- Resolution: 128 x 64
- Visual Angle: >160°
- Input Voltage: 3.3V ~ 6V
- Only Need 2 I/O Port Control
₹275.00₹400.00inc.GST0.96 INCH 4PIN WHITE OLED Display Module
₹275.00₹400.00inc.GST -
4000W 220V DIMMER Voltage Regulators SCR Speed Controller
- 4 Terminals,220V into 0-220V adjustable output,Be sure to take the load transfer
- Mainly used:Thermostat,Dimming,Governor(Heating pipe, Heating wire ,Heating plate,Heating rods,Baisi bulb,Fan,EAF,Solder furnace,Table lamp) and so on
- Voltage: AC 220V Maximum power: 4000W Voltage Regulator: AC 0-220V
₹378.00₹540.00inc.GST4000W 220V DIMMER Voltage Regulators SCR Speed Controller
₹378.00₹540.00inc.GST -
USB to TTL converter UART module CH340G CH340 3.3V 5V switch
- Built-in USB to TTL Transfer chip.
- Designed to be used for USB to TTL electronic projects.
- TTL interface output, easy to connect to your MCU.
- Dual 3.3V and 5V Power output, work with 3.3v and 5 V target device.
- The mini-module is designed specifically for STC download and ARDUINO PRO supports all series of STC
₹95.00₹110.00inc.GSTUSB to TTL converter UART module CH340G CH340 3.3V 5V switch
₹95.00₹110.00inc.GST -
USB TO UART TTL 5V 3.3V FT232RL Download Cable To Serial Adapter Module For Arduino
- Standard interface layout, compatible with a variety of Arduinos such as the Pro Mini
- Original FTDI FT232 chip, stable performance
- USB power has current protection, using 500MA self-restore fuse
- RXD/TXD transceiver communication indicator
- With power, sending, receiving indicator, working status LED indicators
- Mini USB Port Connection
- Support 3.3V, 5V
₹170.00₹200.00inc.GSTUSB TO UART TTL 5V 3.3V FT232RL Download Cable To Serial Adapter Module For Arduino
₹170.00₹200.00inc.GST -
Powerbank Charging Module 5V Micro USB DIY Circuit Board
- Input Voltage: 3. 7V~5. 5V
- Charging Current: 1A(max), Output Current: 1A(max)
- Output voltage: 5V, BAT Discharging Stop Voltage: 2. 9V
- Discharging Efficiency: 85%(input 3. 7V output 5V/1A)
₹55.00₹100.00inc.GSTPowerbank Charging Module 5V Micro USB DIY Circuit Board
₹55.00₹100.00inc.GST -
Laser Module 650NM 5V
- Voltage: 3.0 V – 5 V.
- Driver: APC circuit.
- Line length: about 135 mm.
- Transmit power: 58mW.
- Operating Current: 40mA.
- Operating Current: 40mA.
- Operating temperature: -36◦C ~ 65◦C.
₹36.00₹108.00inc.GSTLaser Module 650NM 5V
₹36.00₹108.00inc.GST
