-
SIM800L GPRS GSM Module Board with power supply and antenna ( color may vary)
- Maximum input voltage 18V dc
- INBUILT ANTENNA
- HIGH EFFICIENCY STEP DOWN CONVERTER
- USE 12V 1A SUPPLY TO POWER
- TTL serial port for serial port, you can link directly to the micro-controller.
- Don’t need MAX232.
- Power module automatically boots, homing network.
₹578.00₹650.00inc.GSTSIM800L GPRS GSM Module Board with power supply and antenna ( color may vary)
₹578.00₹650.00inc.GST -
ISD1820 Recording Module Voice Board With On Board Mic and Loud Speaker
- The main chip: ISD1820.
- Operating Voltage:Â DC 3V-5V.
- Loudspeaker: 8Ω, 0.5W.
- An easy to use 10 seconds of voice recording.
- High-quality, natural voice restored.
- Can be used as a propaganda module.
- With looping, jog playback, single-pass play function.
₹577.50₹600.00inc.GSTISD1820 Recording Module Voice Board With On Board Mic and Loud Speaker
₹577.50₹600.00inc.GST -
4000W 220V DIMMER Voltage Regulators SCR Speed Controller
- 4 Terminals,220V into 0-220V adjustable output,Be sure to take the load transfer
- Mainly used:Thermostat,Dimming,Governor(Heating pipe, Heating wire ,Heating plate,Heating rods,Baisi bulb,Fan,EAF,Solder furnace,Table lamp) and so on
- Voltage: AC 220V Maximum power: 4000W Voltage Regulator: AC 0-220V
₹378.00₹540.00inc.GST4000W 220V DIMMER Voltage Regulators SCR Speed Controller
₹378.00₹540.00inc.GST -
₹368.00
₹500.00inc.GSTSIM800L GPRS GSM Module Core Board
₹368.00₹500.00inc.GST -
Raspberry Pi Camera Board Module rev 1.3 5 Megapixel
Second generation raspberry pi camera module with fixed focus lens
Features official raspberry pi camera module v2 1080p
2592 x 1944 pixel static images, This module is only capable of taking pictures and video, not sound,1080p30 video₹350.00₹500.00inc.GSTRaspberry Pi Camera Board Module rev 1.3 5 Megapixel
₹350.00₹500.00inc.GST -
GPS module (NEO-6M GPS )
Interface: UART interface, with logical level converter, 3.3V-5V interface compatible
SunRobotics ublox neo-6m gps module (3.3V-5V interface with eeprom and flash)
Board size: 23mm*40mm
Antenna: High gain active anttenna and good performance. 25mm*25mm₹300.00₹700.00inc.GSTGPS module (NEO-6M GPS )
₹300.00₹700.00inc.GST -
EM18 RFID reader
5VDC through USB (External 5V supply will boost range of the module)
Current: <50mA
Operating Frequency: 125Khz
Read Distance: 10cm
Size of RFID reader module: 32mm(length) * 32mm(width) * 8mm(height)
₹280.00₹354.00inc.GSTEM18 RFID reader
₹280.00₹354.00inc.GST -
Bluetooth module HC-05
- Bluetooth protocal: Bluetooth Specification v2.0 EDR.
- Frequency: 2.4GHz ISM band.
- Modulation: GFSK(Gaussian Frequency Shift Keying)
- Emission power: ≤4dBm, Class 2.
- Sensitivity: ≤-84dBm at 0.1% BER.
- Speed: Asynchronous: 2.1Mbps(Max) / 160 kbps, Synchronous: 1Mbps/1Mbps.
₹278.00₹336.30inc.GSTBluetooth module HC-05
₹278.00₹336.30inc.GST -
0.96 INCH 4PIN WHITE OLED Display Module
- Driver IC: SSD1306
- Resolution: 128 x 64
- Visual Angle: >160°
- Input Voltage: 3.3V ~ 6V
- Only Need 2 I/O Port Control
₹275.00₹400.00inc.GST0.96 INCH 4PIN WHITE OLED Display Module
₹275.00₹400.00inc.GST -
ADXL335 3-Axis Accelerometer Module
3-axis sensing
Small, low-profile package
4 mm × 4 mm × 1.45 mm LFCSP
Low power – 350 μA (typical)
Single-supply operation: 1.8 V to 3.6 V
10,000 g shock survival
Excellent temperature stability
BW adjustment with a single capacitor per axis
RoHS/WEEE lead-free compliant
₹270.00₹350.00inc.GSTADXL335 3-Axis Accelerometer Module
₹270.00₹350.00inc.GST -
Arduino LilyPad 328 ATmega328P Board
- Microcontroller: ATmega168 or ATmega328V
- Operating Voltage: 2.7-5.5 V
- Digital I/O Pins: 14
- PWM Channels: 6
- Analog Input Channels: 6
- DC Current per I/O Pin: 40 mA
- Board will run from 2V to 5V.
- The latest version of the LilyPad supports automatic reset for even easier programming.
- The back side of the LilyPad is now completely flat.
₹265.00₹300.00inc.GSTArduino LilyPad 328 ATmega328P Board
₹265.00₹300.00inc.GST -
0.96 inch BLUE OLED Display Module 4 pin
- OLED Driver IC: SSD1306
- Resolution: 128 x 64
- Visual Angle: >160°
- Input Voltage: 3.3V ~ 6V
- Compatible I/O Level: 3.3V, 5V
- Mini Size: 2.7 x 2.8cm
- Only Need 2 I/O Port to Control
- Full Compatible with Arduino
- Working temperature: -30°C ~ 70°C
- Module volume ( generous ): 27.0 x 27.0 x 4.1mm
- Factory configured for SPI protocol (can be easily changed to IIC)
- PCB COLOR MAY BE BLUE OR GREEN
₹264.00₹300.00inc.GST0.96 inch BLUE OLED Display Module 4 pin
₹264.00₹300.00inc.GST -
0.9 Inch I2C/IIC OLED Display Module 4pin
- Size: 1.3 inch
- Resolution: 128 x 64
- Controlling Chip: SSH1106
- Driving Voltage: 3.3-5V
- Operating Temperature: -40~70 celsius
- Interface Type: IIC
₹263.00₹400.00inc.GST0.9 Inch I2C/IIC OLED Display Module 4pin
₹263.00₹400.00inc.GST -
RFID Card Reader Module
- Integrated MF RC522
- 13.56MHz contactless communication card chip.
- The low-voltage, low-cost, small size of the non-contact card chip to read and write.
- Working current：13 – 26mA / DC 3.3V
- Standby current：10 – 13mA / DC 3.3V
- Sleep current：<80uA
- Peak current：<30mA
- Working frequency：13.56MHz
- Card reading distance ：0～60mm （Mifare1 card
₹263.00₹300.00inc.GSTRFID Card Reader Module
₹263.00₹300.00inc.GST -
2.4GHz NRF24L01+PA+LNA SMA Wireless Transceiver Antenna
- Voltage: 3-3.6V (recommended 3.3V) V.
- Maximum output power: +20dBm.
- Power-down mode current: 4.2uA.
- Operating Range: 1Km
- Antenna Gain (peak): 2Dbi.
- 2MB rate (Open area): 520m.
- 1MB rate (Open area): 750m.
- 250Kb rate (Open area): 1100m.
- It uses 2.4GHz global open ISM band.
- SPI interface facilitates the communication with MCU I/O port.
₹248.00₹350.00inc.GST2.4GHz NRF24L01+PA+LNA SMA Wireless Transceiver Antenna
₹248.00₹350.00inc.GST -
₹220.50
₹299.00inc.GSTTCS3200 Color Recognition Sensor Module
₹220.50₹299.00inc.GST
