-
USB to TTL converter UART module CH340G CH340 3.3V 5V switch
- Built-in USB to TTL Transfer chip.
- Designed to be used for USB to TTL electronic projects.
- TTL interface output, easy to connect to your MCU.
- Dual 3.3V and 5V Power output, work with 3.3v and 5 V target device.
- The mini-module is designed specifically for STC download and ARDUINO PRO supports all series of STC
₹95.00₹110.00inc.GSTUSB to TTL converter UART module CH340G CH340 3.3V 5V switch
₹95.00₹110.00inc.GST -
Infrared ( IR sensor ) Module
Active High digital Output ( 5V)
3mm Mounting hole for easy mounting
Can be used for multitude of applications
Compatible with almost all microcontrollers with digital input
Two onboard LED’s
Calibration Pot
Great for DIY projects and Arduino beginners
Easy to use breadboard friendly form factor₹38.00₹47.00inc.GSTInfrared ( IR sensor ) Module
₹38.00₹47.00inc.GST -
Dual USB 5V 1A 2.1A Mobile Power Bank 18650 Battery Charger Module
- USB input: 5V 1A
- USB Output: 5V 2.1A / 5V 1A(Dual USB interface)
- Charging display: intelligent digital display
- Batteries Type: liquid lithium-ion batteries (18650) 3.7 lithium-ion battery only
- Product Size: 57mm x 28mm Screen size: 27mm x 17m
₹176.00₹250.00inc.GSTDual USB 5V 1A 2.1A Mobile Power Bank 18650 Battery Charger Module
₹176.00₹250.00inc.GST -
5v relay module
- Microcontroller development board can be used as modules, can be used as appliance control
- 5V – 12 V control signal of the TTL
- Control DC or AC signals can control the 220V AC Load
- there is a normally open and open normally closed contact
- Useful to control a motor, a LED strip, or any other module using arduino. How to use it: Just connect a digital output of your arduino to your relay module, and you can control a power-demanding appliance with the digital signal provided by your arduino
₹57.75₹90.00inc.GST5v relay module
₹57.75₹90.00inc.GST -
solar panel in square shape/mini solar panel /70mm*70mm /6v,100ampere
Material – silicon
Type – Polycrystalline
No. of cells – 1
Solar power-0.6
Output voltage -6
₹60.50₹100.00inc.GSTsolar panel in square shape/mini solar panel /70mm*70mm /6v,100ampere
₹60.50₹100.00inc.GST -
5V 10A 2 Channel Relay Module (colour may vary)
Size: 50. 6mm (l) x 38. 8mm (w) x 19. 3mm (h)
Weight: 30g
PCB color black
Around the board with 4 mounting holes, hole diameter 3. 1 mm, easy installation and fixing
Relay high quality single relay single pole double throw
A common end, a beginning, a closed-end, optical coupling isolation, good anti-interference
Low suction, high level release₹100.00₹150.00inc.GST5V 10A 2 Channel Relay Module (colour may vary)
₹100.00₹150.00inc.GST -
TP4056/TC4056 1A Li-Ion Lithium Battery Charging Module (Micro B USB)
- Input voltage : 4.5V ~ 5.5V.
- Input Interface: Micro USB port.
- A full charge voltage: 4.2V.
- Charging accuracy: 1.5%.
- Charging method: linear charge.
- Power: 4.2 w.
- Operating Temperature: -10 to +85ºC
- Charging indicator: LED indicators for charging and full charging.
₹25.00₹50.00inc.GSTTP4056/TC4056 1A Li-Ion Lithium Battery Charging Module (Micro B USB)
₹25.00₹50.00inc.GST -
-
5V DC Adapter 1 Amp (casing may vary)
AC input voltage: 100V – 240V, 50Hz / 60Hz
Output DC Voltage: 5V
Output Current: 1A
Standby power: <0.3W
₹130.00₹171.00inc.GST5V DC Adapter 1 Amp (casing may vary)
₹130.00₹171.00inc.GST -
₹59.00
₹100.00inc.GST 41% offSMD colour LED Module
₹59.00₹100.00inc.GST 41% off -
₹50.00
₹65.00inc.GST1 Channel 5V Relay Module without Optocoupler
₹50.00₹65.00inc.GST -
₹88.00
₹150.00inc.GSTRTC module clock DS1307 WITH Battery
₹88.00₹150.00inc.GST -
-
AC-DC Buck Converter step down Transformer power supply module SMPS
- AC-DC 5V 700mA 3.5W
- Precision Buck Converter
- AC 220v to 5v DC step down Transformer power supply module
₹99.00₹200.00inc.GSTAC-DC Buck Converter step down Transformer power supply module SMPS
₹99.00₹200.00inc.GST -
0.96 inch BLUE OLED Display Module 4 pin
- OLED Driver IC: SSD1306
- Resolution: 128 x 64
- Visual Angle: >160°
- Input Voltage: 3.3V ~ 6V
- Compatible I/O Level: 3.3V, 5V
- Mini Size: 2.7 x 2.8cm
- Only Need 2 I/O Port to Control
- Full Compatible with Arduino
- Working temperature: -30°C ~ 70°C
- Module volume ( generous ): 27.0 x 27.0 x 4.1mm
- Factory configured for SPI protocol (can be easily changed to IIC)
- PCB COLOR MAY BE BLUE OR GREEN
₹264.00₹300.00inc.GST0.96 inch BLUE OLED Display Module 4 pin
₹264.00₹300.00inc.GST -
L293D Motor Driver Shield for Arduino Uno
- 2 connections for 5V ‘hobby’ servos connected to the Arduino’s high-resolution dedicated timer
- 4 H-Bridges: L293D chipset provides 0.6A per bridge (1.2A peak) with thermal shutdown protection, internal kickback protection diodes.
- Can run motors on 4.5VDC to 25VDC.
- Up to 4 bi-directional DC motors with individual 8-bit speed selection (so, about 0.5% resolution)
- Up to 2 stepper motors (unipolar or bipolar) with single coil, double coil, or interleaved stepping.
₹176.00₹200.00inc.GSTL293D Motor Driver Shield for Arduino Uno
₹176.00₹200.00inc.GST
