-
Water Pump Micro DC 3-6V with nozzle
Operating Voltage : 2.5 ~ 6V
Operating Current : 130 ~ 220mA
Flow Rate : 80 ~ 120 L/H
Maximum Lift : 40 ~ 110 mm
Continuous Working Life : 500 hours
Driving Mode : DC, Magnetic Driving
Material : Engineering Plastic
Outlet Outside Diameter : 7.5 mm
Outlet Inside Diameter : 5 mm
₹69.00₹90.00inc.GSTWater Pump Micro DC 3-6V with nozzle
₹69.00₹90.00inc.GST -
MG995 Metal Gear Servo Motor 180º Rotation TowerPro HIGH QULAITY
- High resolution
- Accurate positioning
- Fast control response
- Constant torque throughout the servo travel range
- Excellent holding power
₹352.00₹400.00inc.GSTMG995 Metal Gear Servo Motor 180º Rotation TowerPro HIGH QULAITY
₹352.00₹400.00inc.GST -
Gear Motor 12V DC 60RPM
- There are nuts and threads on shaft to easily connect and internal threaded shaft to connect it to wheel
- Features: 12V DC motors with Gearbox 125gm weight Same size motor available in various RPM 5kgcm torque
- No-load current = 60 mA(Max), Load current = 600 mA(Max)
₹187.00₹200.00inc.GSTGear Motor 12V DC 60RPM
₹187.00₹200.00inc.GST -
Gear Motor 12V DC 150rpm
- There are nuts and threads on shaft to easily connect and internal threaded shaft to connect it to wheel
- Features: 12V DC motors with Gearbox 125gm weight Same size motor available in various RPM 5kgcm torque
- No-load current = 60 mA(Max), Load current = 600 mA(Max)
₹187.00₹200.00inc.GSTGear Motor 12V DC 150rpm
₹187.00₹200.00inc.GST -
60 rpm bo motor mono shaft
- Low density: lightweight, low inertia.
- Capability to absorb shock and vibration as a result of elastic compliance.
- Ability to operate with minimum or no lubrication, due to inherent lubricity.
- The relatively low coefficient of friction.
- Operating Voltage(VDC): 3~12
- Shaft Length (mm): 8.5
- Shaft Diameter (mm): 5.5 (Double D-type)
- No Load Current: 40-180mA.
- Rated Speed(After Reduction): 60 RPM
- Rated Torque: 1 Kgcm
₹75.00₹77.00inc.GST60 rpm bo motor mono shaft
₹75.00₹77.00inc.GST -
100 RPM Monoshaft BO Motor
- Operating Voltage : 3.0~12.0V DC
- Without Loading : 40~180mA
- Output Torque : 0.8~3Kgf.cm
- Weight :30.0 g
₹66.00₹100.00inc.GST100 RPM Monoshaft BO Motor
₹66.00₹100.00inc.GST -
TowardPro MG996R Digital High Torque Servo Motor
- Weight: 56g
- Dimension: 40×19.7×41mm
- Stall torque: 9.4kg/cm (4.8v); 11kg/cm (6.0v)
- Operating speed: 0.19sec/60degree (4.8v); 0.15sec/60degree (6.0v)
- Operating voltage: 4.8 ~ 6.6V
- Gear Type: Metal gear
- Wire length: 32cm
₹363.00₹450.00inc.GSTTowardPro MG996R Digital High Torque Servo Motor
₹363.00₹450.00inc.GST -
BO Motor Straight Mono Shaft 3-6V
- Low density: lightweight, low inertia.
- Capability to absorb shock and vibration as a result of elastic compliance.
- Ability to operate with minimum or no lubrication, due to inherent lubricity.
- The relatively low coefficient of friction.
- Operating Voltage(VDC): 3~6
- Shaft Length (mm): 8.5
- Shaft Diameter (mm): 5.5
₹55.00₹100.00inc.GST 45% offBO Motor Straight Mono Shaft 3-6V
₹55.00₹100.00inc.GST 45% off -
Coreless Motor 3.7V 8520 8.5x20mm Micro Without Propeller (pack 1)
- Model: 8520
- Shaft Size: 1.0 mm
- Rated Voltage: 3.7 V.
- Wire Length: 6cm
- Prop. Length: 8.5x20mm
₹75.00₹150.00inc.GSTCoreless Motor 3.7V 8520 8.5x20mm Micro Without Propeller (pack 1)
₹75.00₹150.00inc.GST -
A2212 10T 1400KV Brushless Motor for Drone (Soldered Connector)
- Model: A2212/10T
- Motor KV: 1400
- Max. Efficiency Current: 6-12A
- No Load Current: 0.7A @10V
- Current Capacity: 16A/60S
₹420.00₹600.00inc.GSTA2212 10T 1400KV Brushless Motor for Drone (Soldered Connector)
₹420.00₹600.00inc.GST -
12V 10RPM Geared DC Motor
- Gear Type: Plastic
- RPM: 10
- Working Voltage (VDC): 4-12V (12V recommended and maximum)
- Torque (kg – cm): 5
- Load Current Max: 300mA
- No-Load Current (mA): 60mA
₹209.00₹250.00inc.GST12V 10RPM Geared DC Motor
₹209.00₹250.00inc.GST -
Stepper motor 5V uni polar 28BYJ-48
- High quality stepper motor
- Voltage: DC 5V
- Diameter: 25mm
- Step Angle: 5.625 x 1/64
- Reduction Ratio: 1/64
- Rated voltage ： 5VDC
- Frequency : 100Hz
- DC resistance ： 50Ω±7%(25℃)
- Idle In-traction Frequency : > 600Hz
₹87.00₹100.00inc.GSTStepper motor 5V uni polar 28BYJ-48
₹87.00₹100.00inc.GST -
Mini motor DC 5V
- Voltage : 5V
- Size : 37mm*20mm
- Good quality products
- Mainly used in robotic toys
₹15.00₹40.00inc.GSTMini motor DC 5V
₹15.00₹40.00inc.GST -
Center Shaft Gear Motor L Clamp -2pcs
- Material: Mild Steel
- Thickness: 2 mm
- Motor Mounting Hole: 13.5 mm
- Bracket Mounting Hole: 3 mm
- Weight: 26 gm (each
₹36.00₹50.00inc.GSTCenter Shaft Gear Motor L Clamp -2pcs
₹36.00₹50.00inc.GST -
100 RPM Dual Shaft BO Motor
- Low density: lightweight, low inertia.
- Capability to absorb shock and vibration as a result of elastic compliance.
- Rated Speed(After Reduction): 100 RPM
- Rated Torque: 0.35 Kg cm
₹66.00₹100.00inc.GST100 RPM Dual Shaft BO Motor
₹66.00₹100.00inc.GST -
Nema 23 25 Kg-cm 4 Wire Bipolar Stepper Motor High Torque for 3D Printer CNC Robotics DIY Projects
1. Step Angle: 1.8 degree
2. Voltage: 2.3V
3. Current/phase: 2.8A
4. Resistance/phase: 0.98 ohms
5. Holding Torque: 10.1 kg.cm
6. Rotor Inertia: 275 g.cm2
7. Inductance/ phase (mH): 2.2
8. No. of Leads: 4
9. Weight (kg): 0.65
10. Step Angle Accuracy – (+-) 5%
11. Resistance Accuracy – (+-) 10%
12. Inductance Accuracy – (+-) 20%
13. Detent Torque (kg-cm): 0.36
14. Length (mm): 74
15. Frame Size (mm): 57×57
16. Shaft Length (mm): 19
17. Shaft Diameter (mm): 8.5
₹1260.00₹1899.00inc.GSTNema 23 25 Kg-cm 4 Wire Bipolar Stepper Motor High Torque for 3D Printer CNC Robotics DIY Projects
₹1260.00₹1899.00inc.GST
