Shop

200 steps per revolution, 1.8 degrees

Bipolar stepper, requires 2 full H-bridges!

4-wire, 8 inch leads

42mm/1.65″ square body

31mm/1.22″ square mounting holes, 3mm metric screws (M3)

5mm diameter drive shaft, 24mm long, with a machined flat

12V rated voltage (you can drive it at a lower voltage, but the torque will drop) at 350mA max current

28 oz*in, 20 N*cm, 2 Kg*cm holding torque per phase

35 ohms per winding