Best Seller Items
-
PAM8403 5V Two-channel Stereo Mini Class-D Audio Amplifier
- Dual channel stereo, high output power (3 w + 3 w power @ 5V and 4 ohms load)..
- Double panel wiring solves crosstalk.
- Super mini design allows it to be easily placed in a variety of digital products.
- 3W Output at 10% THD with a 4ΩLoad and 5V Power Supply.
- Filterless, Low Quiescent Current and Low EMI and Low Noise.
- Short Circuit Protection and Thermal Shutdown
₹28.00₹50.00inc.GSTPAM8403 5V Two-channel Stereo Mini Class-D Audio Amplifier
₹28.00₹50.00inc.GST -
ATMEGA328 OR ATMEGA8 Arduino breakout board PCB with components unsoldered (Colour may vary)
- High quality FR4 double side pcb.
- ATMEGA328 or ATMEGA8
₹77.00₹150.00inc.GST -
CT Current Transformer 5A mini Sensor ZMCT103C DTCT103C (Color may vary)
- Rated input current: 5A
- Rated output current: 5 mA
- Ratio: 1000: 1
- Linear range: 0-10 A (100 Ohm)
- Linearity: 0.2%
- Insulation voltage: 3000 V
₹33.00₹70.00inc.GSTCT Current Transformer 5A mini Sensor ZMCT103C DTCT103C (Color may vary)
₹33.00₹70.00inc.GST -
TPA3116D2 2.1 Channel Digital Subwoofer Amplifier Board DC, 12-24 V, 2 x 50 W + 100 W
- Applicable speaker impedance: 4-8 ohm.
- Adopts two high-quality TPA3116D2 digital amplifier chips.
- Powered by DC 12-24V, wide input voltage.
- Sound quality is very good, high efficiency and amplifying power.
- 50W x 2+100W Â 2.1 channels(left/right channel and subwoofer channel), high efficiency and low-heat.
- User can adjust the volume by themselves easily.
₹1225.00₹1899.00inc.GSTTPA3116D2 2.1 Channel Digital Subwoofer Amplifier Board DC, 12-24 V, 2 x 50 W + 100 W
₹1225.00₹1899.00inc.GST -
Piezoelectric Sensor Buzzer Transducer/Disc 27mm Piezo sensor
- Sound pressure level: 85DB 10cm
- The input voltage: 30vp-p max
- Operating Temperature: -20~70
- Clear sound
- Ultra-thin and lightweight
- Low power consumption for voltage type
₹6.00₹40.00inc.GSTPiezoelectric Sensor Buzzer Transducer/Disc 27mm Piezo sensor
₹6.00₹40.00inc.GST -
100 RPM Dual Shaft BO Motor
- Low density: lightweight, low inertia.
- Capability to absorb shock and vibration as a result of elastic compliance.
- Rated Speed(After Reduction): 100 RPM
- Rated Torque: 0.35 Kg cm
₹66.00₹100.00inc.GST100 RPM Dual Shaft BO Motor
₹66.00₹100.00inc.GST
-
₹149.00
₹200.00inc.GSTSolar panel 4V 100mA (60*60)
₹149.00₹200.00inc.GST -
LCD 16×2 display yellow back light
 Pin No Function Name1Ground (0V)Ground2Supply voltage; 5V (4.7V – 5.3V) Vcc3Contrast adjustment; through a variable resistor VEE4Selects command register when low; and data register when highRegister Select5Low to write to the register; High to read from the registerRead/write6Sends data to data pins when a high to low pulse is givenEnable78-bit data pinsDB08DB19DB210DB311DB412DB513DB614DB715Backlight VCC (5V)Led16Backlight Ground (0V)Led-₹155.00₹255.00inc.GSTLCD 16×2 display yellow back light
₹155.00₹255.00inc.GST -
₹157.50
₹200.00inc.GSTMAX7219 Dot Led Matrix Module MCU Control LED Display Module
₹157.50₹200.00inc.GST -
CP2102 module USB to TTL serial UART
- Brand new and high quality.
- PCB Dimensions: 26.5mm * 15.6mm
- Weight: 4g
- using a new chip factory in 2013 CP2102
- with three LEDs: power indicator, data reception indicator, the data transmission indicator, working status
- with 3.3V and 5V dual power output
- pin leads to all sorts of useful
₹160.00₹250.00inc.GSTCP2102 module USB to TTL serial UART
₹160.00₹250.00inc.GST -
PIC16F616 DIP14
- Power Source: DC
- RoHS Compliant
- Material: Plastic
- Weight: 100
₹160.00 inc.GSTPIC16F616 DIP14
₹160.00 inc.GST -
CNC shield V3 for Engraving Machine 3D Printer
- Latest Arduino CNC Shield Version 3.10
- GRBL 0.9 compatible.Â
- Coolant enable.
- Jumpers to set the Micro-Stepping for the stepper drivers.
- Compact design.
- 4-Axis support (X, Y, Z, A-Can duplicate X, Y, Z or do a full 4th axis with custom firmware using pins D12 and D13)
- 2 x End stops for each axis (6 in total)
₹165.00₹250.00inc.GSTCNC shield V3 for Engraving Machine 3D Printer
₹165.00₹250.00inc.GST -
LCD 16×2 display blue back light
 Pin No Function Name1Ground (0V)Ground2Supply voltage; 5V (4.7V – 5.3V) Vcc3Contrast adjustment; through a variable resistor VEE4Selects command register when low; and data register when highRegister Select5Low to write to the register; High to read from the registerRead/write6Sends data to data pins when a high to low pulse is givenEnable78-bit data pinsDB08DB19DB210DB311DB412DB513DB614DB715Backlight VCC (5V)Led16Backlight Ground (0V)Led-₹165.00₹255.00inc.GSTLCD 16×2 display blue back light
₹165.00₹255.00inc.GST -
STM8S003F3P6 system board STM8S003F3 STM8S STM8 development board minimum core board
- 3.3v to 5v supply
- high quality pcb
- Power Source: DC
- RoHS Compliant
- Material: Copper
- Weight: 120
₹168.00₹229.00inc.GSTSTM8S003F3P6 system board STM8S003F3 STM8S STM8 development board minimum core board
₹168.00₹229.00inc.GST -
Current Sensor ACS712 30A
5V power supply
On-board power indicator
Bidirectional current measurement up to 30A
Analog output with a sensitivity of 66 mV / A
₹170.00₹220.00inc.GSTCurrent Sensor ACS712 30A
₹170.00₹220.00inc.GST -
USB TO UART TTL 5V 3.3V FT232RL Download Cable To Serial Adapter Module For Arduino
- Standard interface layout, compatible with a variety of Arduinos such as the Pro Mini
- Original FTDI FT232 chip, stable performance
- USB power has current protection, using 500MA self-restore fuse
- RXD/TXD transceiver communication indicator
- With power, sending, receiving indicator, working status LED indicators
- Mini USB Port Connection
- Support 3.3V, 5V
₹170.00₹200.00inc.GSTUSB TO UART TTL 5V 3.3V FT232RL Download Cable To Serial Adapter Module For Arduino
₹170.00₹200.00inc.GST -
₹173.25
₹200.00inc.GST4 Road/Channel Relay Module
₹173.25₹200.00inc.GST -
Dual USB 5V 1A 2.1A Mobile Power Bank 18650 Battery Charger Module
- USB input: 5V 1A
- USB Output: 5V 2.1A / 5V 1A(Dual USB interface)
- Charging display: intelligent digital display
- Batteries Type: liquid lithium-ion batteries (18650) 3.7 lithium-ion battery only
- Product Size: 57mm x 28mm Screen size: 27mm x 17m
₹176.00₹250.00inc.GSTDual USB 5V 1A 2.1A Mobile Power Bank 18650 Battery Charger Module
₹176.00₹250.00inc.GST -
L293D Motor Driver Shield for Arduino Uno
- 2 connections for 5V ‘hobby’ servos connected to the Arduino’s high-resolution dedicated timer
- 4 H-Bridges: L293D chipset provides 0.6A per bridge (1.2A peak) with thermal shutdown protection, internal kickback protection diodes.
- Can run motors on 4.5VDC to 25VDC.
- Up to 4 bi-directional DC motors with individual 8-bit speed selection (so, about 0.5% resolution)
- Up to 2 stepper motors (unipolar or bipolar) with single coil, double coil, or interleaved stepping.
₹176.00₹200.00inc.GSTL293D Motor Driver Shield for Arduino Uno
₹176.00₹200.00inc.GST -
12V DC Adapter 2 Amp
Type:12V 2A
Input: 100-240V AC 50/60Hz
Output : 12V 2.0A
Dimensions:80(L) x 45(W) x 30(H) mm
Cable length: about 110CM
Output adaptor : 5.5mm x 2.1mm
Condition: Brand New 100%
Power Cord is included:1.2M
₹177.00₹194.70inc.GST12V DC Adapter 2 Amp
₹177.00₹194.70inc.GST -
DC Motor Geared (100RPM)
The metal gears have better wear and tear properties.
Gearbox is sealed and lubricated with lithium grease and requires no maintenance.
Although motor gives 100 RPM at 12V, motor runs smoothly from 4V to 12V and gives the wide range of RPM, and torque.
The shaft has a hole for better coupling.
Operating Voltage(V): 12
Rated Torque(kg-cm): 2.9
Stall Torque(kg-cm): 11.4
₹178.00₹200.00inc.GSTDC Motor Geared (100RPM)
₹178.00₹200.00inc.GST -
Pulse Heart Beat Sensor
- A Color-Coded Cable, with a standard male header connectors. Plug it straight into an Arduino or a Breadboard. No soldering is required.
- The Pulse Sensor has 3 holes around the outside edge which make it easy to sew it into almost anything.
- Visualization software (made in Processing) to instantly see the output of the sensor and for troubleshooting.
₹181.50₹200.00inc.GSTPulse Heart Beat Sensor
₹181.50₹200.00inc.GST