Best Seller Items
-
PAM8403 5V Two-channel Stereo Mini Class-D Audio Amplifier
- Dual channel stereo, high output power (3 w + 3 w power @ 5V and 4 ohms load)..
- Double panel wiring solves crosstalk.
- Super mini design allows it to be easily placed in a variety of digital products.
- 3W Output at 10% THD with a 4ΩLoad and 5V Power Supply.
- Filterless, Low Quiescent Current and Low EMI and Low Noise.
- Short Circuit Protection and Thermal Shutdown
₹28.00₹50.00inc.GSTPAM8403 5V Two-channel Stereo Mini Class-D Audio Amplifier
₹28.00₹50.00inc.GST -
ATMEGA328 OR ATMEGA8 Arduino breakout board PCB with components unsoldered (Colour may vary)
- High quality FR4 double side pcb.
- ATMEGA328 or ATMEGA8
₹77.00₹150.00inc.GST -
CT Current Transformer 5A mini Sensor ZMCT103C DTCT103C (Color may vary)
- Rated input current: 5A
- Rated output current: 5 mA
- Ratio: 1000: 1
- Linear range: 0-10 A (100 Ohm)
- Linearity: 0.2%
- Insulation voltage: 3000 V
₹33.00₹70.00inc.GSTCT Current Transformer 5A mini Sensor ZMCT103C DTCT103C (Color may vary)
₹33.00₹70.00inc.GST -
TPA3116D2 2.1 Channel Digital Subwoofer Amplifier Board DC, 12-24 V, 2 x 50 W + 100 W
- Applicable speaker impedance: 4-8 ohm.
- Adopts two high-quality TPA3116D2 digital amplifier chips.
- Powered by DC 12-24V, wide input voltage.
- Sound quality is very good, high efficiency and amplifying power.
- 50W x 2+100W Â 2.1 channels(left/right channel and subwoofer channel), high efficiency and low-heat.
- User can adjust the volume by themselves easily.
₹1225.00₹1899.00inc.GSTTPA3116D2 2.1 Channel Digital Subwoofer Amplifier Board DC, 12-24 V, 2 x 50 W + 100 W
₹1225.00₹1899.00inc.GST -
Piezoelectric Sensor Buzzer Transducer/Disc 27mm Piezo sensor
- Sound pressure level: 85DB 10cm
- The input voltage: 30vp-p max
- Operating Temperature: -20~70
- Clear sound
- Ultra-thin and lightweight
- Low power consumption for voltage type
₹6.00₹40.00inc.GSTPiezoelectric Sensor Buzzer Transducer/Disc 27mm Piezo sensor
₹6.00₹40.00inc.GST -
100 RPM Dual Shaft BO Motor
- Low density: lightweight, low inertia.
- Capability to absorb shock and vibration as a result of elastic compliance.
- Rated Speed(After Reduction): 100 RPM
- Rated Torque: 0.35 Kg cm
₹66.00₹100.00inc.GST100 RPM Dual Shaft BO Motor
₹66.00₹100.00inc.GST
-
₹189.00
₹250.00inc.GST3.7V 600mAH 20mm*35mm Li-po Rechargeable Battery Model
₹189.00₹250.00inc.GST -
HX711 Dual-Channel 24 Bit weight Pressure Sensor
- Two selectable differential input channels.
- On-chip oscillator requiring no external component with optional external crystal.
- On-chip power-on-reset.
- Measurement Resolution:Â 24 bit.
₹72.00₹100.00inc.GSTHX711 Dual-Channel 24 Bit weight Pressure Sensor
₹72.00₹100.00inc.GST -
A4988 driver Stepper Motor Driver
- Supply Voltage : 8-35 VDC.
- Current : 1.0A Â (no heatsink ).
- Current : 2.0A (with heat-sinking).
- logic input : 3 – 5.5V .
- Automatic current decay mode detection / choice.
- Mixed with slow current decay mode.
₹100.00₹150.00inc.GSTA4988 driver Stepper Motor Driver
₹100.00₹150.00inc.GST -
Center Shaft Gear Motor L Clamp -2pcs
- Material: Mild Steel
- Thickness: 2 mm
- Motor Mounting Hole: 13.5 mm
- Bracket Mounting Hole: 3 mm
- Weight: 26 gm (each
₹36.00₹50.00inc.GSTCenter Shaft Gear Motor L Clamp -2pcs
₹36.00₹50.00inc.GST -
Wheel 7Cm X 1Cm Width FOR BO MOTOR
- Body material – Plastic
- Grip Material – Rubber
- Shaft Diameter : 6 mm.
- Loading Capacity : 2 kg.
- Color : White
₹15.00₹100.00inc.GSTWheel 7Cm X 1Cm Width FOR BO MOTOR
₹15.00₹100.00inc.GST -
Robot Wheel 7cm x 2cm Width HOLE 6MM (single piece)
- Shaft Diameter – 6 mm
- Wheel Diameter – 70 mm
- Wheel Width – 20 mm
- Weight: 33gm/Wheel
₹21.00₹35.00inc.GSTRobot Wheel 7cm x 2cm Width HOLE 6MM (single piece)
₹21.00₹35.00inc.GST -
BMP180 GY68 Digital Barometric Pressure Sensor Board Module GY-68 For Arduino
- GY-68 BMP180 GY68
- Digital Barometric Pressure Sensor Board Module
- compatible with BMP085 For Arduino
₹53.00₹100.00inc.GSTBMP180 GY68 Digital Barometric Pressure Sensor Board Module GY-68 For Arduino
₹53.00₹100.00inc.GST -
₹26.00
₹50.00inc.GST4 Way Slide Switch 2.54mm Pitch
₹26.00₹50.00inc.GST -
RFID Card Reader Module
- Integrated MF RC522
- 13.56MHz contactless communication card chip.
- The low-voltage, low-cost, small size of the non-contact card chip to read and write.
- Working current：13 – 26mA / DC 3.3V
- Standby current：10 – 13mA / DC 3.3V
- Sleep current：<80uA
- Peak current：<30mA
- Working frequency：13.56MHz
- Card reading distance ：0～60mm （Mifare1 card
₹263.00₹300.00inc.GSTRFID Card Reader Module
₹263.00₹300.00inc.GST -
Heart Rate Monitor Kit with AD8232 ECG sensor module
- Designed to extract, amplify, and filter small biopotential signals.
- Leads-Off Detection.
- Shutdown Pin.
- LED Indicator.
- Analog Output.
- 3.5 mm Jack for Biomedical Pad Connection.
₹643.00₹700.00inc.GSTHeart Rate Monitor Kit with AD8232 ECG sensor module
₹643.00₹700.00inc.GST -
Pulse Heart Beat Sensor
- A Color-Coded Cable, with a standard male header connectors. Plug it straight into an Arduino or a Breadboard. No soldering is required.
- The Pulse Sensor has 3 holes around the outside edge which make it easy to sew it into almost anything.
- Visualization software (made in Processing) to instantly see the output of the sensor and for troubleshooting.
₹181.50₹200.00inc.GSTPulse Heart Beat Sensor
₹181.50₹200.00inc.GST -
12V DC 1/2″ Electric Solenoid Water Air Valve Switch (Normally Closed)
- Rated Operating Voltage: 12V DC.
- Rated Current: 0.6A.
- Operation Mode: NC (Normally Closed).
- Pressure: 0.02 – 0.8MPa.
- Max fluid temperature: 100°C.
₹472.00₹500.00inc.GST12V DC 1/2″ Electric Solenoid Water Air Valve Switch (Normally Closed)
₹472.00₹500.00inc.GST -
Valve 12v-24v DC
- Operating Voltage: 12V / 24V DC.
- Current Requirement: 400 mA.
- Connections: Push Fit Type.
- Nozzle Diameter: 6.3 mm.
- Normally Closed Valve.
₹212.40₹250.00inc.GSTValve 12v-24v DC
₹212.40₹250.00inc.GST -
Raspberry Pi 4 Model B with 2 GB RAM
- 2GB/4GB Varients.
- Quad-Core 64-bit Broadcom 2711, Cortex A72Â Processor.
- WLAN 802.11 b/g/n/ac (2,4 + 5,0 GHz).
- LAN RJ45 10/100/1000 Mbit (Gigabit LAN over USB 3.0).
- Operating Power 5V@3AÂ via USB Type-C Port.
₹4305.00₹4500.00inc.GSTRaspberry Pi 4 Model B with 2 GB RAM
₹4305.00₹4500.00inc.GST -
Arduino LilyPad 328 ATmega328P Board
- Microcontroller: ATmega168 or ATmega328V
- Operating Voltage: 2.7-5.5 V
- Digital I/O Pins: 14
- PWM Channels: 6
- Analog Input Channels: 6
- DC Current per I/O Pin: 40 mA
- Board will run from 2V to 5V.
- The latest version of the LilyPad supports automatic reset for even easier programming.
- The back side of the LilyPad is now completely flat.
₹265.00₹300.00inc.GSTArduino LilyPad 328 ATmega328P Board
₹265.00₹300.00inc.GST -
₹385.00
₹500.00inc.GSTTowerPro MG995 – Continuous Rotation 360° Metal Gear Servo Motor
₹385.00₹500.00inc.GST