Best Seller Items
-
PAM8403 5V Two-channel Stereo Mini Class-D Audio Amplifier
- Dual channel stereo, high output power (3 w + 3 w power @ 5V and 4 ohms load)..
- Double panel wiring solves crosstalk.
- Super mini design allows it to be easily placed in a variety of digital products.
- 3W Output at 10% THD with a 4ΩLoad and 5V Power Supply.
- Filterless, Low Quiescent Current and Low EMI and Low Noise.
- Short Circuit Protection and Thermal Shutdown
₹28.00₹50.00inc.GSTPAM8403 5V Two-channel Stereo Mini Class-D Audio Amplifier
₹28.00₹50.00inc.GST -
ATMEGA328 OR ATMEGA8 Arduino breakout board PCB with components unsoldered (Colour may vary)
- High quality FR4 double side pcb.
- ATMEGA328 or ATMEGA8
₹77.00₹150.00inc.GST -
CT Current Transformer 5A mini Sensor ZMCT103C DTCT103C (Color may vary)
- Rated input current: 5A
- Rated output current: 5 mA
- Ratio: 1000: 1
- Linear range: 0-10 A (100 Ohm)
- Linearity: 0.2%
- Insulation voltage: 3000 V
₹33.00₹70.00inc.GSTCT Current Transformer 5A mini Sensor ZMCT103C DTCT103C (Color may vary)
₹33.00₹70.00inc.GST -
TPA3116D2 2.1 Channel Digital Subwoofer Amplifier Board DC, 12-24 V, 2 x 50 W + 100 W
- Applicable speaker impedance: 4-8 ohm.
- Adopts two high-quality TPA3116D2 digital amplifier chips.
- Powered by DC 12-24V, wide input voltage.
- Sound quality is very good, high efficiency and amplifying power.
- 50W x 2+100W Â 2.1 channels(left/right channel and subwoofer channel), high efficiency and low-heat.
- User can adjust the volume by themselves easily.
₹1225.00₹1899.00inc.GSTTPA3116D2 2.1 Channel Digital Subwoofer Amplifier Board DC, 12-24 V, 2 x 50 W + 100 W
₹1225.00₹1899.00inc.GST -
Piezoelectric Sensor Buzzer Transducer/Disc 27mm Piezo sensor
- Sound pressure level: 85DB 10cm
- The input voltage: 30vp-p max
- Operating Temperature: -20~70
- Clear sound
- Ultra-thin and lightweight
- Low power consumption for voltage type
₹6.00₹40.00inc.GSTPiezoelectric Sensor Buzzer Transducer/Disc 27mm Piezo sensor
₹6.00₹40.00inc.GST -
100 RPM Dual Shaft BO Motor
- Low density: lightweight, low inertia.
- Capability to absorb shock and vibration as a result of elastic compliance.
- Rated Speed(After Reduction): 100 RPM
- Rated Torque: 0.35 Kg cm
₹66.00₹100.00inc.GST100 RPM Dual Shaft BO Motor
₹66.00₹100.00inc.GST
-
ARDUINO UNO R3 Micro Controller Board with Cable
Model Type UNO Rev R3 Microcontroller Chip ATmega328 Operating Voltage (VDC) 5 Input Voltage(Recommended) 7-12V Input Voltage (limit) 6-20V Analog I/O Pins 6 Digital I/O Pins 14 (of which 6 provide PWM output) PWM Digital I/O Pins 6 DC Current per I/O Pin (mA) 40 DC Current for 3.3V Pin (mA) 50 Clock Speed 16 MHz SRAM (KB) 2 EEPROM 1 KB (ATmega328) Flash Memory 32 KB On Board LEDs On/Off, L (PIN 13), TX, RX Dimensions in mm (LxWxH) 75 x 54 x 12 Weight (gm) 28 (without cable)
54 (with cable)₹740.00₹900.00inc.GSTARDUINO UNO R3 Micro Controller Board with Cable
₹740.00₹900.00inc.GST -
arduino Arduino UNO R3 Board ATmega328P (DIP)
Model Type UNO Rev R3 Microcontroller Chip ATmega328 Operating Voltage (VDC) 5 Input Voltage(Recommended) 7-12V Input Voltage (limit) 6-20V Analog I/O Pins 6 Digital I/O Pins 14 (of which 6 provide PWM output) PWM Digital I/O Pins 6 DC Current per I/O Pin (mA) 40 DC Current for 3.3V Pin (mA) 50 Clock Speed 16 MHz SRAM (KB) 2 EEPROM 1 KB (ATmega328) Flash Memory 32 KB On Board LEDs On/Off, L (PIN 13), TX, RX Dimensions in mm (LxWxH) 75 x 54 x 12 Weight (gm) 28Â ₹766.00₹800.00inc.GSTarduino Arduino UNO R3 Board ATmega328P (DIP)
₹766.00₹800.00inc.GST -
Arduino Mega 2560
Place Product ImageMicrocontroller: AT91SAM3X8E , Operating Voltage: 3.3V , Input Voltage (recommended): 7-12V
Input Voltage (limits): 6-16V , Digital I/O Pins: 54 (of which 12 provide PWM output) Analog Input Pins: 12 , Analog Outputs Pins: 2 (DAC)
Total DC Output Current on all I/O lines: 130 mA , DC Current for 3.3V Pin: 800 mA , DC Current for 5V Pin: 800 mA
Flash Memory : 512 KB all available for the user applications , SRAM: 96 KB (two banks: 64KB and 32KB)
Clock Speed: 84 MHz , Dimensions: 104 x 53 x 15mm , Weight: 35g₹1005.00₹1500.00inc.GSTArduino Mega 2560
₹1005.00₹1500.00inc.GST -
TPA3116D2 2.1 Channel Digital Subwoofer Amplifier Board DC, 12-24 V, 2 x 50 W + 100 W
- Applicable speaker impedance: 4-8 ohm.
- Adopts two high-quality TPA3116D2 digital amplifier chips.
- Powered by DC 12-24V, wide input voltage.
- Sound quality is very good, high efficiency and amplifying power.
- 50W x 2+100W Â 2.1 channels(left/right channel and subwoofer channel), high efficiency and low-heat.
- User can adjust the volume by themselves easily.
₹1225.00₹1899.00inc.GSTTPA3116D2 2.1 Channel Digital Subwoofer Amplifier Board DC, 12-24 V, 2 x 50 W + 100 W
₹1225.00₹1899.00inc.GST -
Nema 23 25 Kg-cm 4 Wire Bipolar Stepper Motor High Torque for 3D Printer CNC Robotics DIY Projects
1. Step Angle: 1.8 degree
2. Voltage: 2.3V
3. Current/phase: 2.8A
4. Resistance/phase: 0.98 ohms
5. Holding Torque: 10.1 kg.cm
6. Rotor Inertia: 275 g.cm2
7. Inductance/ phase (mH): 2.2
8. No. of Leads: 4
9. Weight (kg): 0.65
10. Step Angle Accuracy – (+-) 5%
11. Resistance Accuracy – (+-) 10%
12. Inductance Accuracy – (+-) 20%
13. Detent Torque (kg-cm): 0.36
14. Length (mm): 74
15. Frame Size (mm): 57×57
16. Shaft Length (mm): 19
17. Shaft Diameter (mm): 8.5
₹1260.00₹1899.00inc.GSTNema 23 25 Kg-cm 4 Wire Bipolar Stepper Motor High Torque for 3D Printer CNC Robotics DIY Projects
₹1260.00₹1899.00inc.GST -
Raspberry Pi 3 Model B+
- Broadcom BCM2837B0, Cortex-A53 (ARMv8) 64-bit SoC @ 1.4GHz
- 1GB LPDDR2 SDRAM
- 2.4GHz and 5GHz IEEE 802.11.b/g/n/ac wireless LAN, Bluetooth 4.2, BLE
- Gigabit Ethernet over USB 2.0 (maximum throughput 300 Mbps)
- Extended 40-pin GPIO header
- Full-size HDMI
- 4 USB 2.0 ports
- CSI camera port for connecting a Raspberry Pi camera
- DSI display port for connecting a Raspberry Pi touchscreen display
- 4-pole stereo output and composite video port
- Micro SD port for loading your operating system and storing data
- 5V/2.5A DC power input
- Power-over-Ethernet (PoE) support (requires separate PoE HAT)
₹2800.00₹3304.00inc.GSTRaspberry Pi 3 Model B+
₹2800.00₹3304.00inc.GST -
Raspberry Pi 4 Model B with 2 GB RAM
- 2GB/4GB Varients.
- Quad-Core 64-bit Broadcom 2711, Cortex A72Â Processor.
- WLAN 802.11 b/g/n/ac (2,4 + 5,0 GHz).
- LAN RJ45 10/100/1000 Mbit (Gigabit LAN over USB 3.0).
- Operating Power 5V@3AÂ via USB Type-C Port.
₹4305.00₹4500.00inc.GSTRaspberry Pi 4 Model B with 2 GB RAM
₹4305.00₹4500.00inc.GST