Best Seller Items
-
PAM8403 5V Two-channel Stereo Mini Class-D Audio Amplifier
- Dual channel stereo, high output power (3 w + 3 w power @ 5V and 4 ohms load)..
- Double panel wiring solves crosstalk.
- Super mini design allows it to be easily placed in a variety of digital products.
- 3W Output at 10% THD with a 4ΩLoad and 5V Power Supply.
- Filterless, Low Quiescent Current and Low EMI and Low Noise.
- Short Circuit Protection and Thermal Shutdown
₹28.00₹50.00inc.GSTPAM8403 5V Two-channel Stereo Mini Class-D Audio Amplifier
₹28.00₹50.00inc.GST -
ATMEGA328 OR ATMEGA8 Arduino breakout board PCB with components unsoldered (Colour may vary)
- High quality FR4 double side pcb.
- ATMEGA328 or ATMEGA8
₹77.00₹150.00inc.GST -
CT Current Transformer 5A mini Sensor ZMCT103C DTCT103C (Color may vary)
- Rated input current: 5A
- Rated output current: 5 mA
- Ratio: 1000: 1
- Linear range: 0-10 A (100 Ohm)
- Linearity: 0.2%
- Insulation voltage: 3000 V
₹33.00₹70.00inc.GSTCT Current Transformer 5A mini Sensor ZMCT103C DTCT103C (Color may vary)
₹33.00₹70.00inc.GST -
TPA3116D2 2.1 Channel Digital Subwoofer Amplifier Board DC, 12-24 V, 2 x 50 W + 100 W
- Applicable speaker impedance: 4-8 ohm.
- Adopts two high-quality TPA3116D2 digital amplifier chips.
- Powered by DC 12-24V, wide input voltage.
- Sound quality is very good, high efficiency and amplifying power.
- 50W x 2+100W Â 2.1 channels(left/right channel and subwoofer channel), high efficiency and low-heat.
- User can adjust the volume by themselves easily.
₹1225.00₹1899.00inc.GSTTPA3116D2 2.1 Channel Digital Subwoofer Amplifier Board DC, 12-24 V, 2 x 50 W + 100 W
₹1225.00₹1899.00inc.GST -
Piezoelectric Sensor Buzzer Transducer/Disc 27mm Piezo sensor
- Sound pressure level: 85DB 10cm
- The input voltage: 30vp-p max
- Operating Temperature: -20~70
- Clear sound
- Ultra-thin and lightweight
- Low power consumption for voltage type
₹6.00₹40.00inc.GSTPiezoelectric Sensor Buzzer Transducer/Disc 27mm Piezo sensor
₹6.00₹40.00inc.GST -
100 RPM Dual Shaft BO Motor
- Low density: lightweight, low inertia.
- Capability to absorb shock and vibration as a result of elastic compliance.
- Rated Speed(After Reduction): 100 RPM
- Rated Torque: 0.35 Kg cm
₹66.00₹100.00inc.GST100 RPM Dual Shaft BO Motor
₹66.00₹100.00inc.GST
-
ESP-WROOM-32 ESP32 Development Board 38pin
1. 2.4GHz Dual-Mode WiFi + Bluetooth Development Board, 38PIN
2. Ultra-Low power consumption works perfectly with the IDE
3. Support LWIP protocol, Freertos
4. Support Three Modes: AP, STA, and AP+STA
5. ESP 32 is safe, reliable, and scalable to a variety of applications₹503.00₹750.00inc.GSTESP-WROOM-32 ESP32 Development Board 38pin
₹503.00₹750.00inc.GST -
Bluetooth Audio Reciever Module 3v-5v
- Bluetooth 3.0 with audio signal decoding feature.
- The output is directly compatible with the amplifier.
- Very little weight and small size form factor make it easily fits into any application area.
- Can be used to Design your own wireless music system
- Low power consumption.
- 3v-5v voltage supply.
₹58.00₹90.00inc.GSTBluetooth Audio Reciever Module 3v-5v
₹58.00₹90.00inc.GST -
USB to TTL converter UART module CH340G CH340 3.3V 5V switch
- Built-in USB to TTL Transfer chip.
- Designed to be used for USB to TTL electronic projects.
- TTL interface output, easy to connect to your MCU.
- Dual 3.3V and 5V Power output, work with 3.3v and 5 V target device.
- The mini-module is designed specifically for STC download and ARDUINO PRO supports all series of STC
₹95.00₹110.00inc.GSTUSB to TTL converter UART module CH340G CH340 3.3V 5V switch
₹95.00₹110.00inc.GST -
USB TO UART TTL 5V 3.3V FT232RL Download Cable To Serial Adapter Module For Arduino
- Standard interface layout, compatible with a variety of Arduinos such as the Pro Mini
- Original FTDI FT232 chip, stable performance
- USB power has current protection, using 500MA self-restore fuse
- RXD/TXD transceiver communication indicator
- With power, sending, receiving indicator, working status LED indicators
- Mini USB Port Connection
- Support 3.3V, 5V
₹170.00₹200.00inc.GSTUSB TO UART TTL 5V 3.3V FT232RL Download Cable To Serial Adapter Module For Arduino
₹170.00₹200.00inc.GST -
PAM8403 With Potentiometer
- Operating voltage: 2.5V-5.5V
- Maximum output power: 3W x 2
- PCB size is about: length 30mm width 22mm overall height after installed is about 16mm
- Built with switch Potentiometer, can adjust the volume & control power switch freely!
- Flexible assembly usage
₹62.70₹100.00inc.GSTPAM8403 With Potentiometer
₹62.70₹100.00inc.GST -
2Wd Smart Robot Bot with Chassis, Bo Motor, Wheels, Clamps, Battery Box, Switch – robotic kit diy
- Very handy and simple in assembling/disassembling.
- Strong components so as to withstand extreme terrain conditions.
- Transparent Car Chassis.
- Attractive design.
- This car is the tachometer encoder.
- Can use with other devices to realize function of tracing, obstacle avoidance, distance testing, speed testing,
- Size: 21 x 15 cm (L x W).
- Wheel size: 6.5 x 2.7cm (Dia. x H).
₹372.00₹750.00inc.GST -
TPA3116D2 TPA3116 DC12-26V 100W Mono Digital Power Amplifier Digital Audio Amplifier
Chip type:Â TPA3116D2
Input voltage: DC12-26V
Output power: 100W
SNR: 100dB
Channel:Â Mono
Size: 79*54*16mm₹462.00₹530.00inc.GSTTPA3116D2 TPA3116 DC12-26V 100W Mono Digital Power Amplifier Digital Audio Amplifier
₹462.00₹530.00inc.GST -
Powerbank Charging Module 5V Micro USB DIY Circuit Board
- Input Voltage: 3. 7V~5. 5V
- Charging Current: 1A(max), Output Current: 1A(max)
- Output voltage: 5V, BAT Discharging Stop Voltage: 2. 9V
- Discharging Efficiency: 85%(input 3. 7V output 5V/1A)
₹55.00₹100.00inc.GSTPowerbank Charging Module 5V Micro USB DIY Circuit Board
₹55.00₹100.00inc.GST -
Speaker 2W 8 OHM High Quality 3x3X1.5cm Loudspeaker
- Maximum output power – 2 Watts
- SIZE 32x32x17mm
- Impedance: 8 OHM
- FREQUENCY RESPONSE:150Hz-20KHz
- Smaller with Higher Power and High Sensitivity
- Â Application for Laptop PC, AIO computer, GPS, Telecom, White Goods and Medical Device
₹100.00 inc.GSTSpeaker 2W 8 OHM High Quality 3x3X1.5cm Loudspeaker
₹100.00 inc.GST -
TPA3116D2 2.1 Channel Digital Subwoofer Amplifier Board DC, 12-24 V, 2 x 50 W + 100 W
- Applicable speaker impedance: 4-8 ohm.
- Adopts two high-quality TPA3116D2 digital amplifier chips.
- Powered by DC 12-24V, wide input voltage.
- Sound quality is very good, high efficiency and amplifying power.
- 50W x 2+100W Â 2.1 channels(left/right channel and subwoofer channel), high efficiency and low-heat.
- User can adjust the volume by themselves easily.
₹1225.00₹1899.00inc.GSTTPA3116D2 2.1 Channel Digital Subwoofer Amplifier Board DC, 12-24 V, 2 x 50 W + 100 W
₹1225.00₹1899.00inc.GST -
Laser Module 650NM 5V
- Voltage: 3.0 V – 5 V.
- Driver: APC circuit.
- Line length: about 135 mm.
- Transmit power: 58mW.
- Operating Current: 40mA.
- Operating Current: 40mA.
- Operating temperature: -36â—¦C ~ 65â—¦C.
₹36.00₹108.00inc.GSTLaser Module 650NM 5V
₹36.00₹108.00inc.GST -
CT Current Transformer 5A mini Sensor ZMCT103C DTCT103C (Color may vary)
- Rated input current: 5A
- Rated output current: 5 mA
- Ratio: 1000: 1
- Linear range: 0-10 A (100 Ohm)
- Linearity: 0.2%
- Insulation voltage: 3000 V
₹33.00₹70.00inc.GSTCT Current Transformer 5A mini Sensor ZMCT103C DTCT103C (Color may vary)
₹33.00₹70.00inc.GST -
TTP223 Touch Key Module
- Input Voltage : 2 Volt – 5.5 Volts DC.
- Sensitivity can adjust by the capacitance(0~50pF).
- Stable touching detection of the human body for replacing traditional direct switch key.
- Provides direct mode toggle mode by pad option(TOG pin).
- Auto calibration and Re-calibration period is about 4.0 sec when the key has not be touched.
₹50.00 inc.GSTTTP223 Touch Key Module
₹50.00 inc.GST -
MAX30102 Pulse Oximeter Heart Rate Sensor Module
- Working Voltage: 1.8 to 5.5 V
- Shutdown Current: 0.7µA
- Color: Green
₹193.00₹250.00inc.GSTMAX30102 Pulse Oximeter Heart Rate Sensor Module
₹193.00₹250.00inc.GST -
433Mhz RSI Wireless Transmitter Receiver Module
- Range in open space: 30 Meters
- RX IF Frequency: 1MHz
- Very Stable Operating Frequency
- Low Current Consumption (Typ 11mA)
- Wide Operating Voltage (1.5-5v)
₹135.00₹200.00inc.GST433Mhz RSI Wireless Transmitter Receiver Module
₹135.00₹200.00inc.GST -
RC522 – RFID Reader / Writer with Cards Kit
- Integrated MF RC522
- 13.56MHz contactless communication card chip.
- Low-voltage, low-cost, small size of the non-contact card chip to read and write.
- Low cost, and ideal for user equipment development.
- The reader and RF card terminal design meets advanced applications development and production needs.
- Can be directly loaded into the various reader molds, very convenient.
₹115.00₹150.00inc.GSTRC522 – RFID Reader / Writer with Cards Kit
₹115.00₹150.00inc.GST