Best Seller Items
-
PAM8403 5V Two-channel Stereo Mini Class-D Audio Amplifier
- Dual channel stereo, high output power (3 w + 3 w power @ 5V and 4 ohms load)..
- Double panel wiring solves crosstalk.
- Super mini design allows it to be easily placed in a variety of digital products.
- 3W Output at 10% THD with a 4ΩLoad and 5V Power Supply.
- Filterless, Low Quiescent Current and Low EMI and Low Noise.
- Short Circuit Protection and Thermal Shutdown
₹28.00₹50.00inc.GSTPAM8403 5V Two-channel Stereo Mini Class-D Audio Amplifier
₹28.00₹50.00inc.GST -
ATMEGA328 OR ATMEGA8 Arduino breakout board PCB with components unsoldered (Colour may vary)
- High quality FR4 double side pcb.
- ATMEGA328 or ATMEGA8
₹77.00₹150.00inc.GST -
CT Current Transformer 5A mini Sensor ZMCT103C DTCT103C (Color may vary)
- Rated input current: 5A
- Rated output current: 5 mA
- Ratio: 1000: 1
- Linear range: 0-10 A (100 Ohm)
- Linearity: 0.2%
- Insulation voltage: 3000 V
₹33.00₹70.00inc.GSTCT Current Transformer 5A mini Sensor ZMCT103C DTCT103C (Color may vary)
₹33.00₹70.00inc.GST -
TPA3116D2 2.1 Channel Digital Subwoofer Amplifier Board DC, 12-24 V, 2 x 50 W + 100 W
- Applicable speaker impedance: 4-8 ohm.
- Adopts two high-quality TPA3116D2 digital amplifier chips.
- Powered by DC 12-24V, wide input voltage.
- Sound quality is very good, high efficiency and amplifying power.
- 50W x 2+100W Â 2.1 channels(left/right channel and subwoofer channel), high efficiency and low-heat.
- User can adjust the volume by themselves easily.
₹1225.00₹1899.00inc.GSTTPA3116D2 2.1 Channel Digital Subwoofer Amplifier Board DC, 12-24 V, 2 x 50 W + 100 W
₹1225.00₹1899.00inc.GST -
Piezoelectric Sensor Buzzer Transducer/Disc 27mm Piezo sensor
- Sound pressure level: 85DB 10cm
- The input voltage: 30vp-p max
- Operating Temperature: -20~70
- Clear sound
- Ultra-thin and lightweight
- Low power consumption for voltage type
₹6.00₹40.00inc.GSTPiezoelectric Sensor Buzzer Transducer/Disc 27mm Piezo sensor
₹6.00₹40.00inc.GST -
100 RPM Dual Shaft BO Motor
- Low density: lightweight, low inertia.
- Capability to absorb shock and vibration as a result of elastic compliance.
- Rated Speed(After Reduction): 100 RPM
- Rated Torque: 0.35 Kg cm
₹66.00₹100.00inc.GST100 RPM Dual Shaft BO Motor
₹66.00₹100.00inc.GST
-
Bluetooth to serial adapter module breakout board replaces HC-05/06 SLAVE
- Bluetooth V2.1Â + EDR
- Operating voltage: 3.3V
- UART Interface
₹189.00₹399.00inc.GSTBluetooth to serial adapter module breakout board replaces HC-05/06 SLAVE
₹189.00₹399.00inc.GST -
₹189.00
₹250.00inc.GST3.7V 600mAH 20mm*35mm Li-po Rechargeable Battery Model
₹189.00₹250.00inc.GST -
Gear Motor 12V DC 60RPM
- There are nuts and threads on shaft to easily connect and internal threaded shaft to connect it to wheel
- Features:Â 12V DC motors with Gearbox 125gm weight Same size motor available in various RPM 5kgcm torque
- No-load current = 60 mA(Max), Load current = 600 mA(Max)
₹187.00₹200.00inc.GSTGear Motor 12V DC 60RPM
₹187.00₹200.00inc.GST -
Gear Motor 12V DC 150rpm
- There are nuts and threads on shaft to easily connect and internal threaded shaft to connect it to wheel
- Features:Â 12V DC motors with Gearbox 125gm weight Same size motor available in various RPM 5kgcm torque
- No-load current = 60 mA(Max), Load current = 600 mA(Max)
₹187.00₹200.00inc.GSTGear Motor 12V DC 150rpm
₹187.00₹200.00inc.GST -
WiFi Module ESP8266(colour may vary)npm
2.4 GHz Wi-Fi (802.11 b/g/n, supporting WPA/WPA2),
general-purpose input/output (16 GPIO),
Inter-Integrated Circuit (I²C) serial communication protocol,
analog-to-digital conversion (10-bit ADC)
Serial Peripheral Interface (SPI) serial communication protocol,
I²S (Inter-IC Sound) interfaces with DMA(Direct Memory Access) (sharing pins with GPIO),
UART (on dedicated pins, plus a transmit-only UART can be enabled on GPIO2), and
pulse-width modulation (PWM).
₹184.00₹236.00inc.GSTWiFi Module ESP8266(colour may vary)npm
₹184.00₹236.00inc.GST -
Bluetooth FM USB AUX Card MP3 Stereo Audio Player with Remote
- Weight : 0.1 g
- REMOTE INCLUDED
₹182.00₹250.00inc.GST 27% offBluetooth FM USB AUX Card MP3 Stereo Audio Player with Remote
₹182.00₹250.00inc.GST 27% off -
DC Gear motor 30 RPM
- RPM: 30.
- Operating Voltage: 12V DC
- Gearbox: Attached Plastic (spur)Gearbox
- Shaft diameter: 6mm with internal hole
- Torque: 2 kg-cm
- No-load current = 60 mA(Max)
- Load current = 300 mA(Max).
₹182.00₹200.00inc.GSTDC Gear motor 30 RPM
₹182.00₹200.00inc.GST -
Pulse Heart Beat Sensor
- A Color-Coded Cable, with a standard male header connectors. Plug it straight into an Arduino or a Breadboard. No soldering is required.
- The Pulse Sensor has 3 holes around the outside edge which make it easy to sew it into almost anything.
- Visualization software (made in Processing) to instantly see the output of the sensor and for troubleshooting.
₹181.50₹200.00inc.GSTPulse Heart Beat Sensor
₹181.50₹200.00inc.GST -
DC Motor Geared (100RPM)
The metal gears have better wear and tear properties.
Gearbox is sealed and lubricated with lithium grease and requires no maintenance.
Although motor gives 100 RPM at 12V, motor runs smoothly from 4V to 12V and gives the wide range of RPM, and torque.
The shaft has a hole for better coupling.
Operating Voltage(V): 12
Rated Torque(kg-cm): 2.9
Stall Torque(kg-cm): 11.4
₹178.00₹200.00inc.GSTDC Motor Geared (100RPM)
₹178.00₹200.00inc.GST -
12V DC Adapter 2 Amp
Type:12V 2A
Input: 100-240V AC 50/60Hz
Output : 12V 2.0A
Dimensions:80(L) x 45(W) x 30(H) mm
Cable length: about 110CM
Output adaptor : 5.5mm x 2.1mm
Condition: Brand New 100%
Power Cord is included:1.2M
₹177.00₹194.70inc.GST12V DC Adapter 2 Amp
₹177.00₹194.70inc.GST -
L293D Motor Driver Shield for Arduino Uno
- 2 connections for 5V ‘hobby’ servos connected to the Arduino’s high-resolution dedicated timer
- 4 H-Bridges: L293D chipset provides 0.6A per bridge (1.2A peak) with thermal shutdown protection, internal kickback protection diodes.
- Can run motors on 4.5VDC to 25VDC.
- Up to 4 bi-directional DC motors with individual 8-bit speed selection (so, about 0.5% resolution)
- Up to 2 stepper motors (unipolar or bipolar) with single coil, double coil, or interleaved stepping.
₹176.00₹200.00inc.GSTL293D Motor Driver Shield for Arduino Uno
₹176.00₹200.00inc.GST -
Dual USB 5V 1A 2.1A Mobile Power Bank 18650 Battery Charger Module
- USB input: 5V 1A
- USB Output: 5V 2.1A / 5V 1A(Dual USB interface)
- Charging display: intelligent digital display
- Batteries Type: liquid lithium-ion batteries (18650) 3.7 lithium-ion battery only
- Product Size: 57mm x 28mm Screen size: 27mm x 17m
₹176.00₹250.00inc.GSTDual USB 5V 1A 2.1A Mobile Power Bank 18650 Battery Charger Module
₹176.00₹250.00inc.GST -
₹173.25
₹200.00inc.GST4 Road/Channel Relay Module
₹173.25₹200.00inc.GST -
USB TO UART TTL 5V 3.3V FT232RL Download Cable To Serial Adapter Module For Arduino
- Standard interface layout, compatible with a variety of Arduinos such as the Pro Mini
- Original FTDI FT232 chip, stable performance
- USB power has current protection, using 500MA self-restore fuse
- RXD/TXD transceiver communication indicator
- With power, sending, receiving indicator, working status LED indicators
- Mini USB Port Connection
- Support 3.3V, 5V
₹170.00₹200.00inc.GSTUSB TO UART TTL 5V 3.3V FT232RL Download Cable To Serial Adapter Module For Arduino
₹170.00₹200.00inc.GST -
Current Sensor ACS712 30A
5V power supply
On-board power indicator
Bidirectional current measurement up to 30A
Analog output with a sensitivity of 66 mV / A
₹170.00₹220.00inc.GSTCurrent Sensor ACS712 30A
₹170.00₹220.00inc.GST -
STM8S003F3P6 system board STM8S003F3 STM8S STM8 development board minimum core board
- 3.3v to 5v supply
- high quality pcb
- Power Source: DC
- RoHS Compliant
- Material: Copper
- Weight: 120
₹168.00₹229.00inc.GSTSTM8S003F3P6 system board STM8S003F3 STM8S STM8 development board minimum core board
₹168.00₹229.00inc.GST