Best Seller Items
-
PAM8403 5V Two-channel Stereo Mini Class-D Audio Amplifier
- Dual channel stereo, high output power (3 w + 3 w power @ 5V and 4 ohms load)..
- Double panel wiring solves crosstalk.
- Super mini design allows it to be easily placed in a variety of digital products.
- 3W Output at 10% THD with a 4ΩLoad and 5V Power Supply.
- Filterless, Low Quiescent Current and Low EMI and Low Noise.
- Short Circuit Protection and Thermal Shutdown
₹28.00₹50.00inc.GSTPAM8403 5V Two-channel Stereo Mini Class-D Audio Amplifier
₹28.00₹50.00inc.GST -
ATMEGA328 OR ATMEGA8 Arduino breakout board PCB with components unsoldered (Colour may vary)
- High quality FR4 double side pcb.
- ATMEGA328 or ATMEGA8
₹77.00₹150.00inc.GST -
CT Current Transformer 5A mini Sensor ZMCT103C DTCT103C (Color may vary)
- Rated input current: 5A
- Rated output current: 5 mA
- Ratio: 1000: 1
- Linear range: 0-10 A (100 Ohm)
- Linearity: 0.2%
- Insulation voltage: 3000 V
₹33.00₹70.00inc.GSTCT Current Transformer 5A mini Sensor ZMCT103C DTCT103C (Color may vary)
₹33.00₹70.00inc.GST -
TPA3116D2 2.1 Channel Digital Subwoofer Amplifier Board DC, 12-24 V, 2 x 50 W + 100 W
- Applicable speaker impedance: 4-8 ohm.
- Adopts two high-quality TPA3116D2 digital amplifier chips.
- Powered by DC 12-24V, wide input voltage.
- Sound quality is very good, high efficiency and amplifying power.
- 50W x 2+100W Â 2.1 channels(left/right channel and subwoofer channel), high efficiency and low-heat.
- User can adjust the volume by themselves easily.
₹1225.00₹1899.00inc.GSTTPA3116D2 2.1 Channel Digital Subwoofer Amplifier Board DC, 12-24 V, 2 x 50 W + 100 W
₹1225.00₹1899.00inc.GST -
Piezoelectric Sensor Buzzer Transducer/Disc 27mm Piezo sensor
- Sound pressure level: 85DB 10cm
- The input voltage: 30vp-p max
- Operating Temperature: -20~70
- Clear sound
- Ultra-thin and lightweight
- Low power consumption for voltage type
₹6.00₹40.00inc.GSTPiezoelectric Sensor Buzzer Transducer/Disc 27mm Piezo sensor
₹6.00₹40.00inc.GST -
100 RPM Dual Shaft BO Motor
- Low density: lightweight, low inertia.
- Capability to absorb shock and vibration as a result of elastic compliance.
- Rated Speed(After Reduction): 100 RPM
- Rated Torque: 0.35 Kg cm
₹66.00₹100.00inc.GST100 RPM Dual Shaft BO Motor
₹66.00₹100.00inc.GST
-
₹33.00
₹50.00inc.GSTCartoon Ultrasonic Sensor Mounting Bracket For HC-SR04
₹33.00₹50.00inc.GST -
₹65.00
₹80.00inc.GSTRCWL-0516 Microwave Radar Sensor
₹65.00₹80.00inc.GST -
₹368.00
₹500.00inc.GSTSIM800L GPRS GSM Module Core Board
₹368.00₹500.00inc.GST -
₹352.00
₹450.00inc.GST 22% off2.2 Inch Bend Sensor for Hand Gesture Recognition
₹352.00₹450.00inc.GST 22% off -
Digital LDR Module
- LM393 based design.
- Can detect ambient brightness and light intensity.
- Adjustable sensitivity (via blue digital potentiometer adjustment).
- Output Digital – 0V to 5V, Adjustable trigger level from preset.
- LEDs indicating output and power.
- Operating Voltage: 3.3V to 5V DC.
- Operating Current: 15ma.
₹37.00₹70.00inc.GSTDigital LDR Module
₹37.00₹70.00inc.GST -
5mm DIP LED Yellow – 10 Pcs.
- Size: 5mm
- Color: Yellow
- Head Shape: Round
- Lens Appearance: Transparent
₹10.00₹15.00inc.GST5mm DIP LED Yellow – 10 Pcs.
₹10.00₹15.00inc.GST -
₹68.25
₹150.00inc.GSTSound Detection Module Sensor
₹68.25₹150.00inc.GST -
₹57.00
₹199.00inc.GSTRaindrops Detection Sensor Module
₹57.00₹199.00inc.GST -
-
PS2 Joystick Module Breakout Sensor
- Dimensions: 40 x 27 x 15 (LxWxH) mm.
- Weight: 10gm (without Hat).
- 2.54mm pin interface leads.
- Operating Voltage: 5V.
- Long service life and stable performance.
- Standard interface and electronic building blocks.
₹65.00₹150.00inc.GSTPS2 Joystick Module Breakout Sensor
₹65.00₹150.00inc.GST -
ARDUINO UNO R3 (ch340) Micro Controller Board with Cable compatible (Make in india)
Model Type UNO Rev R3 Microcontroller Chip ATmega328 Operating Voltage (VDC) 5 Input Voltage(Recommended) 7-12V Input Voltage (limit) 6-20V Analog I/O Pins 6 Digital I/O Pins 14 (of which 6 provide PWM output) PWM Digital I/O Pins 6 DC Current per I/O Pin (mA) 40 DC Current for 3.3V Pin (mA) 50 Clock Speed 16 MHz SRAM (KB) 2 EEPROM 1 KB (ATmega328) Flash Memory 32 KB On Board LEDs On/Off, L (PIN 13), TX, RX Dimensions in mm (LxWxH) 75 x 54 x 12 Weight (gm) 28 (without cable) 54 (with cable) ₹400.00₹900.00inc.GSTARDUINO UNO R3 (ch340) Micro Controller Board with Cable compatible (Make in india)
₹400.00₹900.00inc.GST -
Temperature Sensor (LM35)
Calibrated Directly in Celsius (Centigrade)
Linear 10-mV/°C Scale Factor
0.5°C Ensured Accuracy (at         25°C)
Rated for Full −55°C to 150°C Range
Suitable for Remote Applications
Low-Cost            Due to Wafer-Level Trimming
Operates From 4 V to 30 V
Less      Than 60-µA Current Drain
Low Self-Heating, 0.08°C in Still Air
Non-Linearity Only ±¼°C Typical
Low-Impedance Output,             0.1 Ω for 1-mA Load
₹68.44₹80.24inc.GSTTemperature Sensor (LM35)
₹68.44₹80.24inc.GST -
Real Time Clock (DS1302) 12
Supply voltage (typically): 3.3V
Voltage range on any pin (with respect to ground): -0.5V to 7.0°C
Operating Temperature (Commercial): 0°C to 70°C
Operating Temperature (Industrial): -40°C to 85°C
Storage Temperature range: -55°C to 125°C
Soldering Temperature: 260°C
₹70.00₹120.00inc.GSTReal Time Clock (DS1302) 12
₹70.00₹120.00inc.GST -
7805 IC 5V (inc GST )
5V Positive Voltage Regulator
Minimum Input Voltage is 7V
Maximum Input Voltage is 25V
Operating current(IQ) is 5mA
Internal Thermal Overload and Short circuit current limiting protection is available.
Junction Temperature maximum 125 degree Celsius
Available in TO-220 and KTE package
₹12.00₹15.25inc.GST7805 IC 5V (inc GST )
₹12.00₹15.25inc.GST -
XY126V 2 Pin XINYA PCB Mount Terminal Block connector 10A 5MM
Rugged
Low maintenance
Perfect finish
Durable
Accurate dimension
Efficient
₹4.13₹4.72inc.GSTXY126V 2 Pin XINYA PCB Mount Terminal Block connector 10A 5MM
₹4.13₹4.72inc.GST