-
STM32F103C676 Development Board ARM Core Module
Experience powerful and efficient programming with the STM32F103C676 Development Board. Featuring an STM32F103C676 MCU, this board is perfect for embedded system projects, IoT applications, and more.
₹270.00₹350.00inc.GSTSTM32F103C676 Development Board ARM Core Module
₹270.00₹350.00inc.GST -
STM 32F103C8T6 ARM STM32 Development Board Module unsoldered
1, stm32F103C8T6Package Type: LQFP;Number of pins: 48;Kernel: Cortex-M3;Operating frequency: 72MHz;Storage resources: 64K Byte Flash, 20KByte SRAM;Interface Resources: 2x SPI, 3x USART, 2x I2C, 1x CAN, 37x I / O ports,Analog-to-digital conversion: 2x ADC (12-bit / 16-channel)Timers: 3 general timers and 1 advanced timerDebug Download: Support JTAG / SWD debug interface to download, support for IAP.2, RT9193: 3.3V regulator chip, the maximum output of 300mA.1, SWD interface: support for simulation, download and debug.2, Mirco USB interface: power supply and USB communication, does not support the download.3, USART1 interface: USART1 can be used to download the program, or use the USART1 for communication.4, MCU pin interface: leads all I / O port pins, easy to connect with peripherals.5, 5V and 3.3V power input and output interface: commonly used in external power supply, or with other modules for common ground treatment₹414.00₹600.00inc.GSTSTM 32F103C8T6 ARM STM32 Development Board Module unsoldered
₹414.00₹600.00inc.GST -
NodeMCU CH340 V3 WI-FI IOT lua board ESP8266
- Power input: 4.5V ~ 9V (10VMAX), USB-powered
- Transfer rate: 110-460800bps
- Support UART / GPIO data communication interface
- Support Smart Link Smart Networking
- Working temperature: -40°C ~ + 125°C
- Drive Type: Dual high-power H-bridge
- A great set of tools to develop ESP8266
- Flash size: 4MByte
- Lowest cost WI-FI
₹270.00₹350.00inc.GSTNodeMCU CH340 V3 WI-FI IOT lua board ESP8266
₹270.00₹350.00inc.GST -
ATMEGA328 OR ATMEGA8 Arduino breakout board PCB with components unsoldered (Colour may vary)
- High quality FR4 double side pcb.
- ATMEGA328 or ATMEGA8
₹77.00₹150.00inc.GST -
ESP-WROOM-32 ESP32 Development Board 38pin
1. 2.4GHz Dual-Mode WiFi + Bluetooth Development Board, 38PIN
2. Ultra-Low power consumption works perfectly with the IDE
3. Support LWIP protocol, Freertos
4. Support Three Modes: AP, STA, and AP+STA
5. ESP 32 is safe, reliable, and scalable to a variety of applications₹503.00₹750.00inc.GSTESP-WROOM-32 ESP32 Development Board 38pin
₹503.00₹750.00inc.GST -
USB C 5V 1A Lithium Battery Charger With Protection Li-ion
- Micro USB 5V 1A
- 18650 TP4056 Lithium Battery Charger Module
- Charging Board With Protection Dual Functions 1A Li-ion
₹30.00₹32.00inc.GSTUSB C 5V 1A Lithium Battery Charger With Protection Li-ion
₹30.00₹32.00inc.GST -
STM8S003F3P6 system board STM8S003F3 STM8S STM8 development board minimum core board
- 3.3v to 5v supply
- high quality pcb
- Power Source: DC
- RoHS Compliant
- Material: Copper
- Weight: 120
₹168.00₹229.00inc.GSTSTM8S003F3P6 system board STM8S003F3 STM8S STM8 development board minimum core board
₹168.00₹229.00inc.GST -
ESP32-CAM 2MP Wi-Fi Bluetooth Development Board with OV2640 Camera Module
- Flash LED off: 180mA @ 5V.
- Flash LED on to maximum brightness: 310mA @ 5V.
- Deep-sleep: 6mA @ 5V min.
- Modem-sleep: 20mA @ 5V min.
- Light-sleep: 6.7mA @ 5V min.
₹614.00₹800.00inc.GSTESP32-CAM 2MP Wi-Fi Bluetooth Development Board with OV2640 Camera Module
₹614.00₹800.00inc.GST -
ATMEGA8 Arduino breakout board
- Inbuilt crystal 16mhz
- 22 pf capacitor
₹43.00₹80.00inc.GSTATMEGA8 Arduino breakout board
₹43.00₹80.00inc.GST -
STM8S105K4T6 Minimum System Board
- 100% Brand new and high-quality STM8 Board
- Model: STM8S105K4T6.
- Core: ARM 8 Cortex CPU.
- 16MHz work frequency.
- 32K flash memory, 2K SRAM.
₹250.00 inc.GSTSTM8S105K4T6 Minimum System Board
₹250.00 inc.GST -
Arduino Pro Mini Atmega328 ProMini
- Microcontroller: ATmega328
- Circuit Operating Voltage: 5V
- Clock frequency: 16MHz.
- Digital I/O Pins: 14
- 8 analog input port: A0 ~ A7.
- A pair of TTL level serial port transceiver : RX / TX.
- 6 PWM port: D3, D5, D6, D9, D10, D11.
- Support serial download.
₹308.00₹350.00inc.GSTArduino Pro Mini Atmega328 ProMini
₹308.00₹350.00inc.GST -
Raspberry Pi 4 Model B with 2 GB RAM
- 2GB/4GB Varients.
- Quad-Core 64-bit Broadcom 2711, Cortex A72 Processor.
- WLAN 802.11 b/g/n/ac (2,4 + 5,0 GHz).
- LAN RJ45 10/100/1000 Mbit (Gigabit LAN over USB 3.0).
- Operating Power 5V@3A via USB Type-C Port.
₹4305.00₹4500.00inc.GSTRaspberry Pi 4 Model B with 2 GB RAM
₹4305.00₹4500.00inc.GST -
ARDUINO UNO R3 (ch340) Micro Controller Board with Cable compatible (Make in india)
Model Type UNO Rev R3 Microcontroller Chip ATmega328 Operating Voltage (VDC) 5 Input Voltage(Recommended) 7-12V Input Voltage (limit) 6-20V Analog I/O Pins 6 Digital I/O Pins 14 (of which 6 provide PWM output) PWM Digital I/O Pins 6 DC Current per I/O Pin (mA) 40 DC Current for 3.3V Pin (mA) 50 Clock Speed 16 MHz SRAM (KB) 2 EEPROM 1 KB (ATmega328) Flash Memory 32 KB On Board LEDs On/Off, L (PIN 13), TX, RX Dimensions in mm (LxWxH) 75 x 54 x 12 Weight (gm) 28 (without cable) 54 (with cable) ₹400.00₹900.00inc.GSTARDUINO UNO R3 (ch340) Micro Controller Board with Cable compatible (Make in india)
₹400.00₹900.00inc.GST -
ARDUINO UNO R3 Micro Controller Board with Cable
Model Type UNO Rev R3 Microcontroller Chip ATmega328 Operating Voltage (VDC) 5 Input Voltage(Recommended) 7-12V Input Voltage (limit) 6-20V Analog I/O Pins 6 Digital I/O Pins 14 (of which 6 provide PWM output) PWM Digital I/O Pins 6 DC Current per I/O Pin (mA) 40 DC Current for 3.3V Pin (mA) 50 Clock Speed 16 MHz SRAM (KB) 2 EEPROM 1 KB (ATmega328) Flash Memory 32 KB On Board LEDs On/Off, L (PIN 13), TX, RX Dimensions in mm (LxWxH) 75 x 54 x 12 Weight (gm) 28 (without cable)
54 (with cable)₹740.00₹900.00inc.GSTARDUINO UNO R3 Micro Controller Board with Cable
₹740.00₹900.00inc.GST -
arduino Arduino UNO R3 Board ATmega328P (DIP)
Model Type UNO Rev R3 Microcontroller Chip ATmega328 Operating Voltage (VDC) 5 Input Voltage(Recommended) 7-12V Input Voltage (limit) 6-20V Analog I/O Pins 6 Digital I/O Pins 14 (of which 6 provide PWM output) PWM Digital I/O Pins 6 DC Current per I/O Pin (mA) 40 DC Current for 3.3V Pin (mA) 50 Clock Speed 16 MHz SRAM (KB) 2 EEPROM 1 KB (ATmega328) Flash Memory 32 KB On Board LEDs On/Off, L (PIN 13), TX, RX Dimensions in mm (LxWxH) 75 x 54 x 12 Weight (gm) 28 ₹766.00₹800.00inc.GSTarduino Arduino UNO R3 Board ATmega328P (DIP)
₹766.00₹800.00inc.GST -
₹350.00
₹525.00inc.GSTArduino UNO SMD R3 ATmega328p
₹350.00₹525.00inc.GST
