In this category, we provide various microcontrollers like from microchip, Atmel,8051 etc
-
Arduino Nano V3.0 ATmega328P Controller Board unsoldered
Microcontroller Atmel ATmega328
Operating Voltage (logic level): 5V
Input Voltage (recommended): 7V ~ 12V
Input Voltage (limits): 6V ~ 20 V
Digital I/O Pins: 14 (of which 6 provide PWM output)
Analog Input Pins: 8
DC Current per I/O Pin: 40mA
Flash Memory: 32KB (ATmega328) (of which 2 KB used by bootloader)
SRAM: 2KB (ATmega328)
EEPROM: 1KB (ATmega328)
Clock Speed: 16MHz₹350.00₹656.00inc.GSTArduino Nano V3.0 ATmega328P Controller Board unsoldered
₹350.00₹656.00inc.GST -
AT89S52-24PU DIP-40 Microcontroller
- Package/Case: DIP-40
- 8K Bytes of In-System Reprogrammable Flash Memory
- Endurance: 1,000 Write/Erase Cycles
- Fully Static Operation: 0 Hz to 33 MHz
- Three-level Program Memory Lock
- 256 x 8-Bit Internal RAM
- 32 Programmable I/O Lines
- Three 16-bit Timer/Counters
- Eight Interrupt Sources
- Programmable Serial Channel
- Low Power Idle and Power Down Modes
₹113.00₹133.00inc.GSTAT89S52-24PU DIP-40 Microcontroller
₹113.00₹133.00inc.GST -
ARDUINO UNO R3 Micro Controller Board with Cable
Model Type UNO Rev R3 Microcontroller Chip ATmega328 Operating Voltage (VDC) 5 Input Voltage(Recommended) 7-12V Input Voltage (limit) 6-20V Analog I/O Pins 6 Digital I/O Pins 14 (of which 6 provide PWM output) PWM Digital I/O Pins 6 DC Current per I/O Pin (mA) 40 DC Current for 3.3V Pin (mA) 50 Clock Speed 16 MHz SRAM (KB) 2 EEPROM 1 KB (ATmega328) Flash Memory 32 KB On Board LEDs On/Off, L (PIN 13), TX, RX Dimensions in mm (LxWxH) 75 x 54 x 12 Weight (gm) 28 (without cable)
54 (with cable)₹740.00₹900.00inc.GSTARDUINO UNO R3 Micro Controller Board with Cable
₹740.00₹900.00inc.GST -
arduino Arduino UNO R3 Board ATmega328P (DIP)
Model Type UNO Rev R3 Microcontroller Chip ATmega328 Operating Voltage (VDC) 5 Input Voltage(Recommended) 7-12V Input Voltage (limit) 6-20V Analog I/O Pins 6 Digital I/O Pins 14 (of which 6 provide PWM output) PWM Digital I/O Pins 6 DC Current per I/O Pin (mA) 40 DC Current for 3.3V Pin (mA) 50 Clock Speed 16 MHz SRAM (KB) 2 EEPROM 1 KB (ATmega328) Flash Memory 32 KB On Board LEDs On/Off, L (PIN 13), TX, RX Dimensions in mm (LxWxH) 75 x 54 x 12 Weight (gm) 28 ₹766.00₹800.00inc.GSTarduino Arduino UNO R3 Board ATmega328P (DIP)
₹766.00₹800.00inc.GST -
Atmel89s51(8051)
Program Memory Type: Flash
Program Memory Size (KB): 4
CPU Speed (MIPS/DMIPS): 4
Digital Communication Peripherals: 1-UART,
Temperature Range (C): 0 to 0
Operating Voltage Range (V): 4 to 5.5
Pin Count: 44
₹85.00₹100.00inc.GSTAtmel89s51(8051)
₹85.00₹100.00inc.GST -
Arduino Nano V3 Development Board – Clone Compatible Model
- Microcontroller ATmega328.
- Operating Voltage (logic level): 5 V.
- Input Voltage (Recommended): 7-12 V.
- Input Voltage (limits): 6-20 V.
- Digital I/O Pins : 14 (of which 6 provide PWM Output)
- Analog Input Pins: 8.
- DC Current per I/O Pin: 40 mA.
- Flash Memory 32 KB (ATmega328) of which 2 KB used by bootloader.
₹344.00₹599.00inc.GSTArduino Nano V3 Development Board – Clone Compatible Model
₹344.00₹599.00inc.GST
