-
433Mhz RSI Wireless Transmitter Receiver Module
- Range in open space: 30 Meters
- RX IF Frequency: 1MHz
- Very Stable Operating Frequency
- Low Current Consumption (Typ 11mA)
- Wide Operating Voltage (1.5-5v)
₹135.00₹200.00inc.GST433Mhz RSI Wireless Transmitter Receiver Module
₹135.00₹200.00inc.GST -
RC522 – RFID Reader / Writer with Cards Kit
- Integrated MF RC522
- 13.56MHz contactless communication card chip.
- Low-voltage, low-cost, small size of the non-contact card chip to read and write.
- Low cost, and ideal for user equipment development.
- The reader and RF card terminal design meets advanced applications development and production needs.
- Can be directly loaded into the various reader molds, very convenient.
₹115.00₹150.00inc.GSTRC522 – RFID Reader / Writer with Cards Kit
₹115.00₹150.00inc.GST -
TP4056/TC4056 1A Li-Ion Lithium Battery Charging Module (Micro B USB)
- Input voltage : 4.5V ~ 5.5V.
- Input Interface: Micro USB port.
- A full charge voltage: 4.2V.
- Charging accuracy: 1.5%.
- Charging method: linear charge.
- Power: 4.2 w.
- Operating Temperature: -10 to +85ºC
- Charging indicator: LED indicators for charging and full charging.
₹25.00₹50.00inc.GSTTP4056/TC4056 1A Li-Ion Lithium Battery Charging Module (Micro B USB)
₹25.00₹50.00inc.GST -
0.9 Inch I2C/IIC OLED Display Module 4pin
- Size: 1.3 inch
- Resolution: 128 x 64
- Controlling Chip: SSH1106
- Driving Voltage: 3.3-5V
- Operating Temperature: -40~70 celsius
- Interface Type: IIC
₹263.00₹400.00inc.GST0.9 Inch I2C/IIC OLED Display Module 4pin
₹263.00₹400.00inc.GST -
Tiny RTC Real Time Clock DS1307 I2C IC Module- 12
- Operating Voltage: 5V
- Two wire I2C interface
- Hour: Minutes: Seconds AM/PM
- Leap year compensation
- Accurate calendar up to the year 2100
- Consumes Less than 500nA in Battery-Backup
₹63.00₹100.00inc.GSTTiny RTC Real Time Clock DS1307 I2C IC Module- 12
₹63.00₹100.00inc.GST -
Dual USB 5V 1A 2.1A Mobile Power Bank 18650 Battery Charger Module
- USB input: 5V 1A
- USB Output: 5V 2.1A / 5V 1A(Dual USB interface)
- Charging display: intelligent digital display
- Batteries Type: liquid lithium-ion batteries (18650) 3.7 lithium-ion battery only
- Product Size: 57mm x 28mm Screen size: 27mm x 17m
₹176.00₹250.00inc.GSTDual USB 5V 1A 2.1A Mobile Power Bank 18650 Battery Charger Module
₹176.00₹250.00inc.GST -
SIM800L GPRS GSM Module Board with power supply and antenna ( color may vary)
- Maximum input voltage 18V dc
- INBUILT ANTENNA
- HIGH EFFICIENCY STEP DOWN CONVERTER
- USE 12V 1A SUPPLY TO POWER
- TTL serial port for serial port, you can link directly to the micro-controller.
- Don’t need MAX232.
- Power module automatically boots, homing network.
₹578.00₹650.00inc.GSTSIM800L GPRS GSM Module Board with power supply and antenna ( color may vary)
₹578.00₹650.00inc.GST -
Vibration Sensor Module SW520D
- The working voltage of 3.3V-5V.
- The comparator output, the signal clean, good waveform, driving ability, more than 15mA
- With a fixed bolt hole, easy to install.
- The use of wide voltage LM393 comparator.
₹42.00₹70.00inc.GSTVibration Sensor Module SW520D
₹42.00₹70.00inc.GST -
HX711 Dual-Channel 24 Bit weight Pressure Sensor
- Two selectable differential input channels.
- On-chip oscillator requiring no external component with optional external crystal.
- On-chip power-on-reset.
- Measurement Resolution:Â 24 bit.
₹72.00₹100.00inc.GSTHX711 Dual-Channel 24 Bit weight Pressure Sensor
₹72.00₹100.00inc.GST -
A4988 driver Stepper Motor Driver
- Supply Voltage : 8-35 VDC.
- Current : 1.0A Â (no heatsink ).
- Current : 2.0A (with heat-sinking).
- logic input : 3 – 5.5V .
- Automatic current decay mode detection / choice.
- Mixed with slow current decay mode.
₹100.00₹150.00inc.GSTA4988 driver Stepper Motor Driver
₹100.00₹150.00inc.GST -
BMP180 GY68 Digital Barometric Pressure Sensor Board Module GY-68 For Arduino
- GY-68 BMP180 GY68
- Digital Barometric Pressure Sensor Board Module
- compatible with BMP085 For Arduino
₹53.00₹100.00inc.GSTBMP180 GY68 Digital Barometric Pressure Sensor Board Module GY-68 For Arduino
₹53.00₹100.00inc.GST -
RFID Card Reader Module
- Integrated MF RC522
- 13.56MHz contactless communication card chip.
- The low-voltage, low-cost, small size of the non-contact card chip to read and write.
- Working current：13 – 26mA / DC 3.3V
- Standby current：10 – 13mA / DC 3.3V
- Sleep current：<80uA
- Peak current：<30mA
- Working frequency：13.56MHz
- Card reading distance ：0～60mm （Mifare1 card
₹263.00₹300.00inc.GSTRFID Card Reader Module
₹263.00₹300.00inc.GST -
DC-DC Buck Converter 4.5-40V to 3-35V Adjustable Step Down Module
- Input voltage: 4.5-40V,
- Output voltage: (3-35V) continuously adjustable (recommended load debugging).
- Minimum pressure: 1.5V
- Output current: rated current 2A, 3A maximum
- Output Power: 15W maximum
₹66.00₹199.00inc.GSTDC-DC Buck Converter 4.5-40V to 3-35V Adjustable Step Down Module
₹66.00₹199.00inc.GST -
solar panel in square shape/mini solar panel /70mm*70mm /6v,100ampere
Material – silicon
Type – Polycrystalline
No. of cells – 1
Solar power-0.6
Output voltage -6
₹60.50₹100.00inc.GSTsolar panel in square shape/mini solar panel /70mm*70mm /6v,100ampere
₹60.50₹100.00inc.GST -
Arduino LilyPad 328 ATmega328P Board
- Microcontroller: ATmega168 or ATmega328V
- Operating Voltage: 2.7-5.5 V
- Digital I/O Pins: 14
- PWM Channels: 6
- Analog Input Channels: 6
- DC Current per I/O Pin: 40 mA
- Board will run from 2V to 5V.
- The latest version of the LilyPad supports automatic reset for even easier programming.
- The back side of the LilyPad is now completely flat.
₹265.00₹300.00inc.GSTArduino LilyPad 328 ATmega328P Board
₹265.00₹300.00inc.GST -
₹90.00
₹100.00inc.GST8×8 Red 64 LED Dot Matrix Display
₹90.00₹100.00inc.GST -
₹157.50
₹200.00inc.GSTMAX7219 Dot Led Matrix Module MCU Control LED Display Module
₹157.50₹200.00inc.GST -
₹130.00
₹150.00inc.GSTDHT11 Digital Relative Humidity and Temperature Sensor Module
₹130.00₹150.00inc.GST
