-
- Power Source: DC
- Material: Plastic
- weight : 0.1g
₹17.00₹30.00 inc.GST
-
- Driver IC: SSD1306
- Resolution: 128 x 64
- Visual Angle: >160°
- Input Voltage: 3.3V ~ 6V
- Only Need 2 I/O Port Control
₹275.00₹400.00 inc.GST
-
- 4 Terminals,220V into 0-220V adjustable output,Be sure to take the load transfer
- Mainly used:Thermostat,Dimming,Governor(Heating pipe, Heating wire ,Heating plate,Heating rods,Baisi bulb,Fan,EAF,Solder furnace,Table lamp) and so on
- Voltage: AC 220V Maximum power: 4000W Voltage Regulator: AC 0-220V
₹378.00₹540.00 inc.GST
-
- Standard interface layout, compatible with a variety of Arduinos such as the Pro Mini
- Original FTDI FT232 chip, stable performance
- USB power has current protection, using 500MA self-restore fuse
- RXD/TXD transceiver communication indicator
- With power, sending, receiving indicator, working status LED indicators
- Mini USB Port Connection
- Support 3.3V, 5V
₹170.00₹200.00 inc.GST
-
- Input Voltage: 3. 7V~5. 5V
- Charging Current: 1A(max), Output Current: 1A(max)
- Output voltage: 5V, BAT Discharging Stop Voltage: 2. 9V
- Discharging Efficiency: 85%(input 3. 7V output 5V/1A)
₹55.00₹100.00 inc.GST
-
- Voltage: 3.0 V – 5 V.
- Driver: APC circuit.
- Line length: about 135 mm.
- Transmit power: 58mW.
- Operating Current: 40mA.
- Operating Current: 40mA.
- Operating temperature: -36â—¦C ~ 65â—¦C.
₹36.00₹108.00 inc.GST
-
- Input Voltage : 2 Volt – 5.5 Volts DC.
- Sensitivity can adjust by the capacitance(0~50pF).
- Stable touching detection of the human body for replacing traditional direct switch key.
- Provides direct mode toggle mode by pad option(TOG pin).
- Auto calibration and Re-calibration period is about 4.0 sec when the key has not be touched.
₹50.00 inc.GST
-
- Working Voltage: 1.8 to 5.5 V
- Shutdown Current: 0.7µA
- Color: Green
₹193.00₹250.00 inc.GST
-
- Range in open space: 30 Meters
- RX IF Frequency: 1MHz
- Very Stable Operating Frequency
- Low Current Consumption (Typ 11mA)
- Wide Operating Voltage (1.5-5v)
₹135.00₹200.00 inc.GST
-
- Integrated MF RC522
- 13.56MHz contactless communication card chip.
- Low-voltage, low-cost, small size of the non-contact card chip to read and write.
- Low cost, and ideal for user equipment development.
- The reader and RF card terminal design meets advanced applications development and production needs.
- Can be directly loaded into the various reader molds, very convenient.
₹115.00₹150.00 inc.GST
-
- Size: 1.3 inch
- Resolution: 128 x 64
- Controlling Chip: SSH1106
- Driving Voltage: 3.3-5V
- Operating Temperature: -40~70 celsius
- Interface Type: IIC
₹263.00₹400.00 inc.GST
-
- Operating Voltage: 5V
- Two wire I2C interface
- Hour: Minutes: Seconds AM/PM
- Leap year compensation
- Accurate calendar up to the year 2100
- Consumes Less than 500nA in Battery-Backup
₹63.00₹100.00 inc.GST
-
- Maximum input voltage 18V dc
- INBUILT ANTENNA
- HIGH EFFICIENCY STEP DOWN CONVERTER
- USE 12V 1A SUPPLY TO POWER
- TTL serial port for serial port, you can link directly to the micro-controller.
- Don’t need MAX232.
- Power module automatically boots, homing network.
₹578.00₹650.00 inc.GST
-
- The working voltage of 3.3V-5V.
- The comparator output, the signal clean, good waveform, driving ability, more than 15mA
- With a fixed bolt hole, easy to install.
- The use of wide voltage LM393 comparator.
₹42.00₹70.00 inc.GST
-
- Two selectable differential input channels.
- On-chip oscillator requiring no external component with optional external crystal.
- On-chip power-on-reset.
- Measurement Resolution:Â 24 bit.
₹72.00₹100.00 inc.GST
-
- Supply Voltage : 8-35 VDC.
- Current : 1.0A Â (no heatsink ).
- Current : 2.0A (with heat-sinking).
- logic input : 3 – 5.5V .
- Automatic current decay mode detection / choice.
- Mixed with slow current decay mode.
₹100.00₹150.00 inc.GST
B2B customers request quotes for wholesale pricing.Our team will intimate with estimated price depends on quantity Dismiss
