-
SD Card Module
3.3V voltage regulator circuit
Level conversion circuit :Â Â Â Â Â Micro SD card into the direction of the signal is converted to 3.3V, MicroSD card interfaces. General AVR microcontroller system can read the signal .
Micro SD card connector : A self- bomb deck , easy card insertion .
Positioning holes : 4 M2 screws positioning hole diameter is 2.2mm, the positioning of the module is easy to install , to achieve inter- module combination.
₹75.00₹97.94inc.GSTSD Card Module
₹75.00₹97.94inc.GST -
Large Breadboard(800 Points)
800 Points
Large Breadboard
₹79.00₹165.00inc.GSTLarge Breadboard(800 Points)
₹79.00₹165.00inc.GST -
XL6009 DC- DC Adjustable Step UP Boost Power Converter Module
- Input voltage: 3-40V
- Output voltage: 1.5-35V(Adjustable)
- Output current: Rated current is 2A, maximum 3A
- Switching Frequency: 150KHz
- Operating temperature:Industrial grade (-40 to +85 )
- Conversion efficiency: 92%(highest)
₹84.00₹199.00inc.GSTXL6009 DC- DC Adjustable Step UP Boost Power Converter Module
₹84.00₹199.00inc.GST -
₹88.00
₹150.00inc.GSTRTC module clock DS1307 WITH Battery
₹88.00₹150.00inc.GST -
Motor Driver Module
CAN CONTROL DC GEARED MOTOR
CAN BE EASILY INTERFACED WITH MICRO-CONTROLLER USING HEADER PINS
COMPATIBLE WITH ARDUINO, RASPBERRY PI, ARM, AVR, PIC, 8051, etc – Can provide bidirectional drive currents of up to 600-mA at voltages from 4.5 V to 36 V.
With Terminal Blocks for connecting motors & power supply and Berg Sticks for control signals from microcontroller
Can control 2 DC Motors, their direction using control lines and their speed using PWM.₹90.00₹123.90inc.GSTMotor Driver Module
₹90.00₹123.90inc.GST -
₹90.00
₹100.00inc.GST8×8 Red 64 LED Dot Matrix Display
₹90.00₹100.00inc.GST -
NRF24L01 2.4GHz Antenna Wireless Transceiver Module
- Maximum operating speeds up to 2Mbps, GFSK modulation efficiency, Anti-interference ability,
- Particularly suitable for industrial control applications.
- Built-in hardware CRC error detection, Multipoint communication address control.
- Low-power 1.9 ~ 3.6V, only 1uA on Power down mode
- Built-in 2.4Ghz antenna
- Built-in voltage regulator
- Standard DIP Pitch Interface for embedded applications
₹91.00₹250.00inc.GSTNRF24L01 2.4GHz Antenna Wireless Transceiver Module
₹91.00₹250.00inc.GST -
RF Transmitter and Receiver kit
Receiver sensitivity: -105DB
Receiving frequency: 433.92MHZ
Transfer rate: 4KB / S
Range 10 meter with wire antena
Transmitting power: 10mW₹92.04₹108.61inc.GSTRF Transmitter and Receiver kit
₹92.04₹108.61inc.GST -
USB to TTL converter UART module CH340G CH340 3.3V 5V switch
- Built-in USB to TTL Transfer chip.
- Designed to be used for USB to TTL electronic projects.
- TTL interface output, easy to connect to your MCU.
- Dual 3.3V and 5V Power output, work with 3.3v and 5 V target device.
- The mini-module is designed specifically for STC download and ARDUINO PRO supports all series of STC
₹95.00₹110.00inc.GSTUSB to TTL converter UART module CH340G CH340 3.3V 5V switch
₹95.00₹110.00inc.GST -
AC-DC Buck Converter step down Transformer power supply module SMPS
- AC-DC 5V 700mA 3.5W
- Precision Buck Converter
- AC 220v to 5v DC step down Transformer power supply module
₹99.00₹200.00inc.GSTAC-DC Buck Converter step down Transformer power supply module SMPS
₹99.00₹200.00inc.GST -
5V 10A 2 Channel Relay Module (colour may vary)
Size: 50. 6mm (l) x 38. 8mm (w) x 19. 3mm (h)
Weight: 30g
PCB color black
Around the board with 4 mounting holes, hole diameter 3. 1 mm, easy installation and fixing
Relay high quality single relay single pole double throw
A common end, a beginning, a closed-end, optical coupling isolation, good anti-interference
Low suction, high level release₹100.00₹150.00inc.GST5V 10A 2 Channel Relay Module (colour may vary)
₹100.00₹150.00inc.GST -
A4988 driver Stepper Motor Driver
- Supply Voltage : 8-35 VDC.
- Current : 1.0A Â (no heatsink ).
- Current : 2.0A (with heat-sinking).
- logic input : 3 – 5.5V .
- Automatic current decay mode detection / choice.
- Mixed with slow current decay mode.
₹100.00₹150.00inc.GSTA4988 driver Stepper Motor Driver
₹100.00₹150.00inc.GST -
I2C INTERFACE MODULE FOR LCD(16X2, 20X4) Micro Controller Board
- 5V power supply.
- Serial I2C control of LCD display using PCF8574.
- Backlight can be enabled or disabled via a jumper on the board.
- Contrast control via a potentiometer.
- Can have 8 modules on a single I2C bus (change address via solder jumpers)address, allowing.
- Size ：41.6 x 19.2 mm.
₹110.00₹150.00inc.GSTI2C INTERFACE MODULE FOR LCD(16X2, 20X4) Micro Controller Board
₹110.00₹150.00inc.GST -
RC522 – RFID Reader / Writer with Cards Kit
- Integrated MF RC522
- 13.56MHz contactless communication card chip.
- Low-voltage, low-cost, small size of the non-contact card chip to read and write.
- Low cost, and ideal for user equipment development.
- The reader and RF card terminal design meets advanced applications development and production needs.
- Can be directly loaded into the various reader molds, very convenient.
₹115.00₹150.00inc.GSTRC522 – RFID Reader / Writer with Cards Kit
₹115.00₹150.00inc.GST -
Nano 328P Expansion Adapter Breakout Board IO Shield
- Compatible with Arduino NANO.
- All digital and analog pins breakout.
- Compact size.
- External power supply current support.
- Leads all pins out, convenient for wiring and doing experiments.
₹120.00₹200.00inc.GSTNano 328P Expansion Adapter Breakout Board IO Shield
₹120.00₹200.00inc.GST
