-
12V DC Adapter 1 Amp (casing may vary)
AC input voltage: 100V – 240V, 50Hz / 60Hz
Output DC Voltage: 12V
Output Current: 1A
Standby power: <0.3W
₹130.00₹171.00inc.GST12V DC Adapter 1 Amp (casing may vary)
₹130.00₹171.00inc.GST -
₹130.00
₹150.00inc.GSTDHT11 Digital Relative Humidity and Temperature Sensor Module
₹130.00₹150.00inc.GST -
5V DC Adapter 1 Amp (casing may vary)
AC input voltage: 100V – 240V, 50Hz / 60Hz
Output DC Voltage: 5V
Output Current: 1A
Standby power: <0.3W
₹130.00₹171.00inc.GST5V DC Adapter 1 Amp (casing may vary)
₹130.00₹171.00inc.GST -
433Mhz RSI Wireless Transmitter Receiver Module
- Range in open space: 30 Meters
- RX IF Frequency: 1MHz
- Very Stable Operating Frequency
- Low Current Consumption (Typ 11mA)
- Wide Operating Voltage (1.5-5v)
₹135.00₹200.00inc.GST433Mhz RSI Wireless Transmitter Receiver Module
₹135.00₹200.00inc.GST -
Alcohol Detector Gas Sensor Module MQ-3
- Power requirements: 5 VDC @ ~165 mA (heater on) / ~60 mA (heater off).
- Current Consumption: 150mA.
- DO output:Â 0.1 and 5V.
- AO output: 0.1- 0.3 V (relative to pollution), the maximum concentration of a voltage of about 4V
- Detecting Concentration: 0.05-10mg/L Alcohol.
₹139.00₹149.00inc.GSTAlcohol Detector Gas Sensor Module MQ-3
₹139.00₹149.00inc.GST -
L298N 2A Based Motor Driver Module
- Current Sense for each motor.
- Heatsink for better performance.
- Power-On LED indicator.
- Double H bridge Drive Chip:Â L298N.
- Operating Voltage(VDC): 5~35
- Peak Current (A): 2
- Continuous Current (A): 0-36mA
- No. of Channels: 2
- Over-Current Protection (A): Yes
- Thermal Protection: Yes
₹143.00₹200.00inc.GSTL298N 2A Based Motor Driver Module
₹143.00₹200.00inc.GST -
₹157.50
₹200.00inc.GSTMAX7219 Dot Led Matrix Module MCU Control LED Display Module
₹157.50₹200.00inc.GST -
CNC shield V3 for Engraving Machine 3D Printer
- Latest Arduino CNC Shield Version 3.10
- GRBL 0.9 compatible.Â
- Coolant enable.
- Jumpers to set the Micro-Stepping for the stepper drivers.
- Compact design.
- 4-Axis support (X, Y, Z, A-Can duplicate X, Y, Z or do a full 4th axis with custom firmware using pins D12 and D13)
- 2 x End stops for each axis (6 in total)
₹165.00₹250.00inc.GSTCNC shield V3 for Engraving Machine 3D Printer
₹165.00₹250.00inc.GST -
USB TO UART TTL 5V 3.3V FT232RL Download Cable To Serial Adapter Module For Arduino
- Standard interface layout, compatible with a variety of Arduinos such as the Pro Mini
- Original FTDI FT232 chip, stable performance
- USB power has current protection, using 500MA self-restore fuse
- RXD/TXD transceiver communication indicator
- With power, sending, receiving indicator, working status LED indicators
- Mini USB Port Connection
- Support 3.3V, 5V
₹170.00₹200.00inc.GSTUSB TO UART TTL 5V 3.3V FT232RL Download Cable To Serial Adapter Module For Arduino
₹170.00₹200.00inc.GST -
₹173.25
₹200.00inc.GST4 Road/Channel Relay Module
₹173.25₹200.00inc.GST -
Dual USB 5V 1A 2.1A Mobile Power Bank 18650 Battery Charger Module
- USB input: 5V 1A
- USB Output: 5V 2.1A / 5V 1A(Dual USB interface)
- Charging display: intelligent digital display
- Batteries Type: liquid lithium-ion batteries (18650) 3.7 lithium-ion battery only
- Product Size: 57mm x 28mm Screen size: 27mm x 17m
₹176.00₹250.00inc.GSTDual USB 5V 1A 2.1A Mobile Power Bank 18650 Battery Charger Module
₹176.00₹250.00inc.GST -
L293D Motor Driver Shield for Arduino Uno
- 2 connections for 5V ‘hobby’ servos connected to the Arduino’s high-resolution dedicated timer
- 4 H-Bridges: L293D chipset provides 0.6A per bridge (1.2A peak) with thermal shutdown protection, internal kickback protection diodes.
- Can run motors on 4.5VDC to 25VDC.
- Up to 4 bi-directional DC motors with individual 8-bit speed selection (so, about 0.5% resolution)
- Up to 2 stepper motors (unipolar or bipolar) with single coil, double coil, or interleaved stepping.
₹176.00₹200.00inc.GSTL293D Motor Driver Shield for Arduino Uno
₹176.00₹200.00inc.GST -
12V DC Adapter 2 Amp
Type:12V 2A
Input: 100-240V AC 50/60Hz
Output : 12V 2.0A
Dimensions:80(L) x 45(W) x 30(H) mm
Cable length: about 110CM
Output adaptor : 5.5mm x 2.1mm
Condition: Brand New 100%
Power Cord is included:1.2M
₹177.00₹194.70inc.GST12V DC Adapter 2 Amp
₹177.00₹194.70inc.GST -
WiFi Module ESP8266(colour may vary)npm
2.4 GHz Wi-Fi (802.11 b/g/n, supporting WPA/WPA2),
general-purpose input/output (16 GPIO),
Inter-Integrated Circuit (I²C) serial communication protocol,
analog-to-digital conversion (10-bit ADC)
Serial Peripheral Interface (SPI) serial communication protocol,
I²S (Inter-IC Sound) interfaces with DMA(Direct Memory Access) (sharing pins with GPIO),
UART (on dedicated pins, plus a transmit-only UART can be enabled on GPIO2), and
pulse-width modulation (PWM).
₹184.00₹236.00inc.GSTWiFi Module ESP8266(colour may vary)npm
₹184.00₹236.00inc.GST -
MAX30102 Pulse Oximeter Heart Rate Sensor Module
- Working Voltage: 1.8 to 5.5 V
- Shutdown Current: 0.7µA
- Color: Green
₹193.00₹250.00inc.GSTMAX30102 Pulse Oximeter Heart Rate Sensor Module
₹193.00₹250.00inc.GST -
₹220.50
₹299.00inc.GSTTCS3200 Color Recognition Sensor Module
₹220.50₹299.00inc.GST
