-
CNC 3D Printer Mech Endstop Limit Switch
- Wire type: 22AWG
- Working voltage: 300V
- Working Current: 2A
- Temperature resistance: 80° C
- Cable length: 70cm
₹46.00₹150.00inc.GSTCNC 3D Printer Mech Endstop Limit Switch
₹46.00₹150.00inc.GST -
PS2 Joystick Module Breakout Sensor
- Dimensions: 40 x 27 x 15 (LxWxH) mm.
- Weight: 10gm (without Hat).
- 2.54mm pin interface leads.
- Operating Voltage: 5V.
- Long service life and stable performance.
- Standard interface and electronic building blocks.
₹65.00₹150.00inc.GSTPS2 Joystick Module Breakout Sensor
₹65.00₹150.00inc.GST -
Piezo Electronic Buzzer Beep Alarm Bell Continuous Sound 3v-24v Buzzer Electromagnetic
- Supply Voltage:12VDC
- Sound Output: 85dB
- Colour: Black
- Wire Length: 110mm
₹18.90₹50.00inc.GST -
5V Passive Buzzer
- Input Voltage(Max.) : 5V
- Resistance: 42 Ω
- Resonance Frequency: 2048 Hz
- Body Size : 12 x 8mm
- Pin Pitch: 6mm
- External Material: Plastic;
- Color: Black
₹15.75₹50.00inc.GST5V Passive Buzzer
₹15.75₹50.00inc.GST -
2.4GHz NRF24L01+PA+LNA SMA Wireless Transceiver Antenna
- Voltage: 3-3.6V (recommended 3.3V) V.
- Maximum output power: +20dBm.
- Power-down mode current: 4.2uA.
- Operating Range: 1Km
- Antenna Gain (peak): 2Dbi.
- 2MB rate (Open area): 520m.
- 1MB rate (Open area): 750m.
- 250Kb rate (Open area): 1100m.
- It uses 2.4GHz global open ISM band.
- SPI interface facilitates the communication with MCU I/O port.
₹248.00₹350.00inc.GST2.4GHz NRF24L01+PA+LNA SMA Wireless Transceiver Antenna
₹248.00₹350.00inc.GST -
NRF24L01 2.4GHz Antenna Wireless Transceiver Module
- Maximum operating speeds up to 2Mbps, GFSK modulation efficiency, Anti-interference ability,
- Particularly suitable for industrial control applications.
- Built-in hardware CRC error detection, Multipoint communication address control.
- Low-power 1.9 ~ 3.6V, only 1uA on Power down mode
- Built-in 2.4Ghz antenna
- Built-in voltage regulator
- Standard DIP Pitch Interface for embedded applications
₹91.00₹250.00inc.GSTNRF24L01 2.4GHz Antenna Wireless Transceiver Module
₹91.00₹250.00inc.GST -
XL6009 DC- DC Adjustable Step UP Boost Power Converter Module
- Input voltage: 3-40V
- Output voltage: 1.5-35V(Adjustable)
- Output current: Rated current is 2A, maximum 3A
- Switching Frequency: 150KHz
- Operating temperature:Industrial grade (-40 to +85 )
- Conversion efficiency: 92%(highest)
₹84.00₹199.00inc.GSTXL6009 DC- DC Adjustable Step UP Boost Power Converter Module
₹84.00₹199.00inc.GST -
ULN2003 Driver Module Stepper Motor Driver Board
- ULN2003A motor driver chip
- Chip all the pins already leads for easy connection to use
- 5-12V power supply
- 4-way signal indicator
- Step angle: 5.625 x 1 / 64
- Reduction ratio: 1 / 64
- Phase: 4
- Current / Phase: 5V
₹45.00₹399.00inc.GSTULN2003 Driver Module Stepper Motor Driver Board
₹45.00₹399.00inc.GST -
I2C INTERFACE MODULE FOR LCD(16X2, 20X4) Micro Controller Board
- 5V power supply.
- Serial I2C control of LCD display using PCF8574.
- Backlight can be enabled or disabled via a jumper on the board.
- Contrast control via a potentiometer.
- Can have 8 modules on a single I2C bus (change address via solder jumpers)address, allowing.
- Size ：41.6 x 19.2 mm.
₹110.00₹150.00inc.GSTI2C INTERFACE MODULE FOR LCD(16X2, 20X4) Micro Controller Board
₹110.00₹150.00inc.GST -
5v relay module
- Microcontroller development board can be used as modules, can be used as appliance control
- 5V – 12 V control signal of the TTL
- Control DC or AC signals can control the 220V AC Load
- there is a normally open and open normally closed contact
- Useful to control a motor, a LED strip, or any other module using arduino. How to use it: Just connect a digital output of your arduino to your relay module, and you can control a power-demanding appliance with the digital signal provided by your arduino
₹57.75₹90.00inc.GST5v relay module
₹57.75₹90.00inc.GST -
EM18 RFID reader
5VDC through USB (External 5V supply will boost range of the module)
Current: <50mA
Operating Frequency: 125Khz
Read Distance: 10cm
Size of RFID reader module: 32mm(length) * 32mm(width) * 8mm(height)
₹280.00₹354.00inc.GSTEM18 RFID reader
₹280.00₹354.00inc.GST -
NTC Thermister Module
Come with broad resistance range
Thermistor cost is economical
Provided with lacquer-coated thermistor disk
Copper leads have coating of tin.
Having lead spacing of 5.0 mm
Component remarked with resistance and tolerance
Good stability, durability in environment
Provide high accuracy in resistance and B-constant
Product is not containing lead
Technical Specifications:
Resistance at 25 degrees C: 10K – 1%
B-value (material constant) = 3950 – 1%
Dissipation factor (loss-rate of energy of a mode of oscillation) δ th = (in air)approx.7.5mW/K
Thermal cooling time constant <= (in air) 20 seconds
Thermistor temperature range -55 °C to 125 °C
₹64.90₹73.16inc.GSTNTC Thermister Module
₹64.90₹73.16inc.GST -
Real Time Clock (DS1302) 12
Supply voltage (typically): 3.3V
Voltage range on any pin (with respect to ground): -0.5V to 7.0°C
Operating Temperature (Commercial): 0°C to 70°C
Operating Temperature (Industrial): -40°C to 85°C
Storage Temperature range: -55°C to 125°C
Soldering Temperature: 260°C
₹70.00₹120.00inc.GSTReal Time Clock (DS1302) 12
₹70.00₹120.00inc.GST -
12V DC Adapter 1 Amp (casing may vary)
AC input voltage: 100V – 240V, 50Hz / 60Hz
Output DC Voltage: 12V
Output Current: 1A
Standby power: <0.3W
₹130.00₹171.00inc.GST12V DC Adapter 1 Amp (casing may vary)
₹130.00₹171.00inc.GST -
12V DC Adapter 2 Amp
Type:12V 2A
Input: 100-240V AC 50/60Hz
Output : 12V 2.0A
Dimensions:80(L) x 45(W) x 30(H) mm
Cable length: about 110CM
Output adaptor : 5.5mm x 2.1mm
Condition: Brand New 100%
Power Cord is included:1.2M
₹177.00₹194.70inc.GST12V DC Adapter 2 Amp
₹177.00₹194.70inc.GST
