-
CNC shield V3 for Engraving Machine 3D Printer
- Latest Arduino CNC Shield Version 3.10
- GRBL 0.9 compatible.Â
- Coolant enable.
- Jumpers to set the Micro-Stepping for the stepper drivers.
- Compact design.
- 4-Axis support (X, Y, Z, A-Can duplicate X, Y, Z or do a full 4th axis with custom firmware using pins D12 and D13)
- 2 x End stops for each axis (6 in total)
₹165.00₹250.00inc.GSTCNC shield V3 for Engraving Machine 3D Printer
₹165.00₹250.00inc.GST -
₹33.00
₹150.00inc.GSTVoltage Detection Sensor Module 25V
₹33.00₹150.00inc.GST -
2.4GHz NRF24L01+PA+LNA SMA Wireless Transceiver Antenna
- Voltage: 3-3.6V (recommended 3.3V) V.
- Maximum output power: +20dBm.
- Power-down mode current: 4.2uA.
- Operating Range: 1Km
- Antenna Gain (peak): 2Dbi.
- 2MB rate (Open area): 520m.
- 1MB rate (Open area): 750m.
- 250Kb rate (Open area): 1100m.
- It uses 2.4GHz global open ISM band.
- SPI interface facilitates the communication with MCU I/O port.
₹248.00₹350.00inc.GST2.4GHz NRF24L01+PA+LNA SMA Wireless Transceiver Antenna
₹248.00₹350.00inc.GST -
XL6009 DC- DC Adjustable Step UP Boost Power Converter Module
- Input voltage: 3-40V
- Output voltage: 1.5-35V(Adjustable)
- Output current: Rated current is 2A, maximum 3A
- Switching Frequency: 150KHz
- Operating temperature:Industrial grade (-40 to +85 )
- Conversion efficiency: 92%(highest)
₹84.00₹199.00inc.GSTXL6009 DC- DC Adjustable Step UP Boost Power Converter Module
₹84.00₹199.00inc.GST -
SD Card Module
3.3V voltage regulator circuit
Level conversion circuit :Â Â Â Â Â Micro SD card into the direction of the signal is converted to 3.3V, MicroSD card interfaces. General AVR microcontroller system can read the signal .
Micro SD card connector : A self- bomb deck , easy card insertion .
Positioning holes : 4 M2 screws positioning hole diameter is 2.2mm, the positioning of the module is easy to install , to achieve inter- module combination.
₹75.00₹97.94inc.GSTSD Card Module
₹75.00₹97.94inc.GST -
EM18 RFID reader
5VDC through USB (External 5V supply will boost range of the module)
Current: <50mA
Operating Frequency: 125Khz
Read Distance: 10cm
Size of RFID reader module: 32mm(length) * 32mm(width) * 8mm(height)
₹280.00₹354.00inc.GSTEM18 RFID reader
₹280.00₹354.00inc.GST -
NTC Thermister Module
Come with broad resistance range
Thermistor cost is economical
Provided with lacquer-coated thermistor disk
Copper leads have coating of tin.
Having lead spacing of 5.0 mm
Component remarked with resistance and tolerance
Good stability, durability in environment
Provide high accuracy in resistance and B-constant
Product is not containing lead
Technical Specifications:
Resistance at 25 degrees C: 10K – 1%
B-value (material constant) = 3950 – 1%
Dissipation factor (loss-rate of energy of a mode of oscillation) δ th = (in air)approx.7.5mW/K
Thermal cooling time constant <= (in air) 20 seconds
Thermistor temperature range -55 °C to 125 °C
₹64.90₹73.16inc.GSTNTC Thermister Module
₹64.90₹73.16inc.GST -
12V DC Adapter 1 Amp (casing may vary)
AC input voltage: 100V – 240V, 50Hz / 60Hz
Output DC Voltage: 12V
Output Current: 1A
Standby power: <0.3W
₹130.00₹171.00inc.GST12V DC Adapter 1 Amp (casing may vary)
₹130.00₹171.00inc.GST -
12V DC Adapter 2 Amp
Type:12V 2A
Input: 100-240V AC 50/60Hz
Output : 12V 2.0A
Dimensions:80(L) x 45(W) x 30(H) mm
Cable length: about 110CM
Output adaptor : 5.5mm x 2.1mm
Condition: Brand New 100%
Power Cord is included:1.2M
₹177.00₹194.70inc.GST12V DC Adapter 2 Amp
₹177.00₹194.70inc.GST -
Keypad 4×4 -47
Maximum Voltage across EACH SEGMENT or BUTTON: 24V
Maximum Current through  EACH SEGMENT or BUTTON: 30mA
Maximum operating temperature: 0°C to 50°C
Ultra-thin design
Adhesive backing
Easy interface
Long life.
₹52.00₹90.00inc.GSTKeypad 4×4 -47
₹52.00₹90.00inc.GST -
WiFi Module ESP8266(colour may vary)npm
2.4 GHz Wi-Fi (802.11 b/g/n, supporting WPA/WPA2),
general-purpose input/output (16 GPIO),
Inter-Integrated Circuit (I²C) serial communication protocol,
analog-to-digital conversion (10-bit ADC)
Serial Peripheral Interface (SPI) serial communication protocol,
I²S (Inter-IC Sound) interfaces with DMA(Direct Memory Access) (sharing pins with GPIO),
UART (on dedicated pins, plus a transmit-only UART can be enabled on GPIO2), and
pulse-width modulation (PWM).
₹184.00₹236.00inc.GSTWiFi Module ESP8266(colour may vary)npm
₹184.00₹236.00inc.GST -
5V 10A 2 Channel Relay Module (colour may vary)
Size: 50. 6mm (l) x 38. 8mm (w) x 19. 3mm (h)
Weight: 30g
PCB color black
Around the board with 4 mounting holes, hole diameter 3. 1 mm, easy installation and fixing
Relay high quality single relay single pole double throw
A common end, a beginning, a closed-end, optical coupling isolation, good anti-interference
Low suction, high level release₹100.00₹150.00inc.GST5V 10A 2 Channel Relay Module (colour may vary)
₹100.00₹150.00inc.GST -
RF Transmitter and Receiver kit
Receiver sensitivity: -105DB
Receiving frequency: 433.92MHZ
Transfer rate: 4KB / S
Range 10 meter with wire antena
Transmitting power: 10mW₹92.04₹108.61inc.GSTRF Transmitter and Receiver kit
₹92.04₹108.61inc.GST -
Motor Driver Module
CAN CONTROL DC GEARED MOTOR
CAN BE EASILY INTERFACED WITH MICRO-CONTROLLER USING HEADER PINS
COMPATIBLE WITH ARDUINO, RASPBERRY PI, ARM, AVR, PIC, 8051, etc – Can provide bidirectional drive currents of up to 600-mA at voltages from 4.5 V to 36 V.
With Terminal Blocks for connecting motors & power supply and Berg Sticks for control signals from microcontroller
Can control 2 DC Motors, their direction using control lines and their speed using PWM.₹90.00₹123.90inc.GSTMotor Driver Module
₹90.00₹123.90inc.GST -
L293D Motor Driver IC
Kit contains:l293d ic x 5
Wide supply-voltage range: 4.5 V to 36 v
Separate input-logic supply output current 1 a per channel (600 ma for l293d)
Peak output current 2 a per channel (1.2 A for 293d)₹35.00₹64.90inc.GSTL293D Motor Driver IC
₹35.00₹64.90inc.GST
