-
ULN2003 Driver Module Stepper Motor Driver Board
- ULN2003A motor driver chip
- Chip all the pins already leads for easy connection to use
- 5-12V power supply
- 4-way signal indicator
- Step angle: 5.625 x 1 / 64
- Reduction ratio: 1 / 64
- Phase: 4
- Current / Phase: 5V
₹45.00₹399.00inc.GSTULN2003 Driver Module Stepper Motor Driver Board
₹45.00₹399.00inc.GST -
₹59.00
₹100.00inc.GST 41% offSMD colour LED Module
₹59.00₹100.00inc.GST 41% off -
₹88.00
₹150.00inc.GSTRTC module clock DS1307 WITH Battery
₹88.00₹150.00inc.GST -
TTP223 Touch Key Module
- Input Voltage : 2 Volt – 5.5 Volts DC.
- Sensitivity can adjust by the capacitance(0~50pF).
- Stable touching detection of the human body for replacing traditional direct switch key.
- Provides direct mode toggle mode by pad option(TOG pin).
- Auto calibration and Re-calibration period is about 4.0 sec when the key has not be touched.
₹50.00 inc.GSTTTP223 Touch Key Module
₹50.00 inc.GST -
433Mhz RSI Wireless Transmitter Receiver Module
- Range in open space: 30 Meters
- RX IF Frequency: 1MHz
- Very Stable Operating Frequency
- Low Current Consumption (Typ 11mA)
- Wide Operating Voltage (1.5-5v)
₹135.00₹200.00inc.GST433Mhz RSI Wireless Transmitter Receiver Module
₹135.00₹200.00inc.GST -
DC-DC Buck Converter 4.5-40V to 3-35V Adjustable Step Down Module
- Input voltage: 4.5-40V,
- Output voltage: (3-35V) continuously adjustable (recommended load debugging).
- Minimum pressure: 1.5V
- Output current: rated current 2A, 3A maximum
- Output Power: 15W maximum
₹66.00₹199.00inc.GSTDC-DC Buck Converter 4.5-40V to 3-35V Adjustable Step Down Module
₹66.00₹199.00inc.GST -
5V Passive Buzzer
- Input Voltage(Max.) : 5V
- Resistance: 42 Ω
- Resonance Frequency: 2048 Hz
- Body Size : 12 x 8mm
- Pin Pitch: 6mm
- External Material: Plastic;
- Color: Black
₹15.75₹50.00inc.GST5V Passive Buzzer
₹15.75₹50.00inc.GST -
5v relay module
- Microcontroller development board can be used as modules, can be used as appliance control
- 5V – 12 V control signal of the TTL
- Control DC or AC signals can control the 220V AC Load
- there is a normally open and open normally closed contact
- Useful to control a motor, a LED strip, or any other module using arduino. How to use it: Just connect a digital output of your arduino to your relay module, and you can control a power-demanding appliance with the digital signal provided by your arduino
₹57.75₹90.00inc.GST5v relay module
₹57.75₹90.00inc.GST -
Large Breadboard(800 Points)
800 Points
Large Breadboard
₹79.00₹165.00inc.GSTLarge Breadboard(800 Points)
₹79.00₹165.00inc.GST -
Bluetooth module HC-05
- Bluetooth protocal: Bluetooth Specification v2.0 EDR.
- Frequency: 2.4GHz ISM band.
- Modulation: GFSK(Gaussian Frequency Shift Keying)
- Emission power: ≤4dBm, Class 2.
- Sensitivity: ≤-84dBm at 0.1% BER.
- Speed: Asynchronous: 2.1Mbps(Max) / 160 kbps, Synchronous: 1Mbps/1Mbps.
₹278.00₹336.30inc.GSTBluetooth module HC-05
₹278.00₹336.30inc.GST -
5V DC Adapter 1 Amp (casing may vary)
AC input voltage: 100V – 240V, 50Hz / 60Hz
Output DC Voltage: 5V
Output Current: 1A
Standby power: <0.3W
₹130.00₹171.00inc.GST5V DC Adapter 1 Amp (casing may vary)
₹130.00₹171.00inc.GST -
USB TO UART TTL 5V 3.3V FT232RL Download Cable To Serial Adapter Module For Arduino
- Standard interface layout, compatible with a variety of Arduinos such as the Pro Mini
- Original FTDI FT232 chip, stable performance
- USB power has current protection, using 500MA self-restore fuse
- RXD/TXD transceiver communication indicator
- With power, sending, receiving indicator, working status LED indicators
- Mini USB Port Connection
- Support 3.3V, 5V
₹170.00₹200.00inc.GSTUSB TO UART TTL 5V 3.3V FT232RL Download Cable To Serial Adapter Module For Arduino
₹170.00₹200.00inc.GST -
Laser Module 650NM 5V
- Voltage: 3.0 V – 5 V.
- Driver: APC circuit.
- Line length: about 135 mm.
- Transmit power: 58mW.
- Operating Current: 40mA.
- Operating Current: 40mA.
- Operating temperature: -36â—¦C ~ 65â—¦C.
₹36.00₹108.00inc.GSTLaser Module 650NM 5V
₹36.00₹108.00inc.GST -
RC522 – RFID Reader / Writer with Cards Kit
- Integrated MF RC522
- 13.56MHz contactless communication card chip.
- Low-voltage, low-cost, small size of the non-contact card chip to read and write.
- Low cost, and ideal for user equipment development.
- The reader and RF card terminal design meets advanced applications development and production needs.
- Can be directly loaded into the various reader molds, very convenient.
₹115.00₹150.00inc.GSTRC522 – RFID Reader / Writer with Cards Kit
₹115.00₹150.00inc.GST -
SIM800L GPRS GSM Module Board with power supply and antenna ( color may vary)
- Maximum input voltage 18V dc
- INBUILT ANTENNA
- HIGH EFFICIENCY STEP DOWN CONVERTER
- USE 12V 1A SUPPLY TO POWER
- TTL serial port for serial port, you can link directly to the micro-controller.
- Don’t need MAX232.
- Power module automatically boots, homing network.
₹578.00₹650.00inc.GSTSIM800L GPRS GSM Module Board with power supply and antenna ( color may vary)
₹578.00₹650.00inc.GST -
Vibration Sensor Module SW520D
- The working voltage of 3.3V-5V.
- The comparator output, the signal clean, good waveform, driving ability, more than 15mA
- With a fixed bolt hole, easy to install.
- The use of wide voltage LM393 comparator.
₹42.00₹70.00inc.GSTVibration Sensor Module SW520D
₹42.00₹70.00inc.GST