-
100 RPM Monoshaft BO Motor
- Operating Voltage : 3.0~12.0V DC
- Without Loading : 40~180mA
- Output Torque : 0.8~3Kgf.cm
- Weight :30.0 g
₹66.00₹100.00inc.GST100 RPM Monoshaft BO Motor
₹66.00₹100.00inc.GST -
TowardPro MG996R Digital High Torque Servo Motor
- Weight: 56g
- Dimension: 40×19.7×41mm
- Stall torque: 9.4kg/cm (4.8v); 11kg/cm (6.0v)
- Operating speed: 0.19sec/60degree (4.8v); 0.15sec/60degree (6.0v)
- Operating voltage: 4.8 ~ 6.6V
- Gear Type: Metal gear
- Wire length: 32cm
₹363.00₹450.00inc.GSTTowardPro MG996R Digital High Torque Servo Motor
₹363.00₹450.00inc.GST -
BO Motor Straight Mono Shaft 3-6V
- Low density: lightweight, low inertia.
- Capability to absorb shock and vibration as a result of elastic compliance.
- Ability to operate with minimum or no lubrication, due to inherent lubricity.
- The relatively low coefficient of friction.
- Operating Voltage(VDC): 3~6
- Shaft Length (mm): 8.5
- Shaft Diameter (mm): 5.5
₹55.00₹100.00inc.GST 45% offBO Motor Straight Mono Shaft 3-6V
₹55.00₹100.00inc.GST 45% off -
A2212 10T 1400KV Brushless Motor for Drone (Soldered Connector)
- Model: A2212/10T
- Motor KV: 1400
- Max. Efficiency Current: 6-12A
- No Load Current: 0.7A @10V
- Current Capacity: 16A/60S
₹420.00₹600.00inc.GSTA2212 10T 1400KV Brushless Motor for Drone (Soldered Connector)
₹420.00₹600.00inc.GST -
Stepper motor 5V uni polar 28BYJ-48
- High quality stepper motor
- Voltage: DC 5V
- Diameter: 25mm
- Step Angle: 5.625 x 1/64
- Reduction Ratio: 1/64
- Rated voltage ： 5VDC
- Frequency : 100Hz
- DC resistance ： 50Ω±7%(25℃)
- Idle In-traction Frequency : > 600Hz
₹87.00₹100.00inc.GSTStepper motor 5V uni polar 28BYJ-48
₹87.00₹100.00inc.GST -
12V 10RPM Geared DC Motor
- Gear Type:Â Plastic
- RPM:Â 10
- Working Voltage (VDC):Â 4-12V (12V recommended and maximum)
- Torque (kg – cm):Â 5
- Load Current Max:Â 300mA
- No-Load Current (mA):Â 60mA
₹209.00₹250.00inc.GST12V 10RPM Geared DC Motor
₹209.00₹250.00inc.GST -
Center Shaft Gear Motor L Clamp -2pcs
- Material: Mild Steel
- Thickness: 2 mm
- Motor Mounting Hole: 13.5 mm
- Bracket Mounting Hole: 3 mm
- Weight: 26 gm (each
₹36.00₹50.00inc.GSTCenter Shaft Gear Motor L Clamp -2pcs
₹36.00₹50.00inc.GST -
₹385.00
₹500.00inc.GSTTowerPro MG995 – Continuous Rotation 360° Metal Gear Servo Motor
₹385.00₹500.00inc.GST -
DC Gear motor 30 RPM
- RPM: 30.
- Operating Voltage: 12V DC
- Gearbox: Attached Plastic (spur)Gearbox
- Shaft diameter: 6mm with internal hole
- Torque: 2 kg-cm
- No-load current = 60 mA(Max)
- Load current = 300 mA(Max).
₹182.00₹200.00inc.GSTDC Gear motor 30 RPM
₹182.00₹200.00inc.GST -
DC Motor Geared (100RPM)
The metal gears have better wear and tear properties.
Gearbox is sealed and lubricated with lithium grease and requires no maintenance.
Although motor gives 100 RPM at 12V, motor runs smoothly from 4V to 12V and gives the wide range of RPM, and torque.
The shaft has a hole for better coupling.
Operating Voltage(V): 12
Rated Torque(kg-cm): 2.9
Stall Torque(kg-cm): 11.4
₹178.00₹200.00inc.GSTDC Motor Geared (100RPM)
₹178.00₹200.00inc.GST -
Motor Driver Module
CAN CONTROL DC GEARED MOTOR
CAN BE EASILY INTERFACED WITH MICRO-CONTROLLER USING HEADER PINS
COMPATIBLE WITH ARDUINO, RASPBERRY PI, ARM, AVR, PIC, 8051, etc – Can provide bidirectional drive currents of up to 600-mA at voltages from 4.5 V to 36 V.
With Terminal Blocks for connecting motors & power supply and Berg Sticks for control signals from microcontroller
Can control 2 DC Motors, their direction using control lines and their speed using PWM.₹90.00₹123.90inc.GSTMotor Driver Module
₹90.00₹123.90inc.GST -
L293D Motor Driver IC
Kit contains:l293d ic x 5
Wide supply-voltage range: 4.5 V to 36 v
Separate input-logic supply output current 1 a per channel (600 ma for l293d)
Peak output current 2 a per channel (1.2 A for 293d)₹35.00₹64.90inc.GSTL293D Motor Driver IC
₹35.00₹64.90inc.GST
