-
100 RPM Dual Shaft BO Motor
- Low density: lightweight, low inertia.
- Capability to absorb shock and vibration as a result of elastic compliance.
- Rated Speed(After Reduction): 100 RPM
- Rated Torque: 0.35 Kg cm
₹66.00₹100.00inc.GST100 RPM Dual Shaft BO Motor
₹66.00₹100.00inc.GST -
High RPM Drone Motor (single motor)
- Model: 615
- Shaft Size: 1.0 mm
- Rated Voltage: 3.7 V.
- Rated RPM: 60000.
- Wire Length: 6cm
- Prop. Length: 55mm
- Prop. Material: Glass Fiber
₹45.00₹95.00inc.GSTHigh RPM Drone Motor (single motor)
₹45.00₹95.00inc.GST -
Coreless Motor 3.7V 8520 8.5x20mm Micro Without Propeller (pack 1)
- Model: 8520
- Shaft Size: 1.0 mm
- Rated Voltage: 3.7 V.
- Wire Length: 6cm
- Prop. Length: 8.5x20mm
₹75.00₹150.00inc.GSTCoreless Motor 3.7V 8520 8.5x20mm Micro Without Propeller (pack 1)
₹75.00₹150.00inc.GST -
ULN2003 Driver Module Stepper Motor Driver Board
- ULN2003A motor driver chip
- Chip all the pins already leads for easy connection to use
- 5-12V power supply
- 4-way signal indicator
- Step angle: 5.625 x 1 / 64
- Reduction ratio: 1 / 64
- Phase: 4
- Current / Phase: 5V
₹45.00₹399.00inc.GSTULN2003 Driver Module Stepper Motor Driver Board
₹45.00₹399.00inc.GST -
Gear Motor 12V DC 60RPM
- There are nuts and threads on shaft to easily connect and internal threaded shaft to connect it to wheel
- Features:Â 12V DC motors with Gearbox 125gm weight Same size motor available in various RPM 5kgcm torque
- No-load current = 60 mA(Max), Load current = 600 mA(Max)
₹187.00₹200.00inc.GSTGear Motor 12V DC 60RPM
₹187.00₹200.00inc.GST -
Nema 23 25 Kg-cm 4 Wire Bipolar Stepper Motor High Torque for 3D Printer CNC Robotics DIY Projects
1. Step Angle: 1.8 degree
2. Voltage: 2.3V
3. Current/phase: 2.8A
4. Resistance/phase: 0.98 ohms
5. Holding Torque: 10.1 kg.cm
6. Rotor Inertia: 275 g.cm2
7. Inductance/ phase (mH): 2.2
8. No. of Leads: 4
9. Weight (kg): 0.65
10. Step Angle Accuracy – (+-) 5%
11. Resistance Accuracy – (+-) 10%
12. Inductance Accuracy – (+-) 20%
13. Detent Torque (kg-cm): 0.36
14. Length (mm): 74
15. Frame Size (mm): 57×57
16. Shaft Length (mm): 19
17. Shaft Diameter (mm): 8.5
₹1260.00₹1899.00inc.GSTNema 23 25 Kg-cm 4 Wire Bipolar Stepper Motor High Torque for 3D Printer CNC Robotics DIY Projects
₹1260.00₹1899.00inc.GST -
BO toy motor 150 rpm
Low density: lightweight, low inertia.
Capability to absorb shock and vibration as a result of elastic compliance.
Ability to operate with minimum or no lubrication, due to inherent lubricity.
The relatively low coefficient of friction.
Operating Voltage(VDC): 3~12
Shaft Length (mm): 8.5
Shaft Diameter (mm): 5.5 (Double D-type)
No Load Current: 40-180mA.
Rated Speed(After Reduction): 150 RPM
Rated Torque: 1 Kgcm
₹65.00₹135.00inc.GSTBO toy motor 150 rpm
₹65.00₹135.00inc.GST -
Water Pump Micro DC 3-6V with nozzle
Operating Voltage : 2.5 ~ 6V
Operating Current : 130 ~ 220mA
Flow Rate : 80 ~ 120 L/H
Maximum Lift : 40 ~ 110 mm
Continuous Working Life : 500 hours
Driving Mode : DC, Magnetic Driving
Material : Engineering Plastic
Outlet Outside Diameter : 7.5 mm
Outlet Inside Diameter : 5 mm
₹69.00₹90.00inc.GSTWater Pump Micro DC 3-6V with nozzle
₹69.00₹90.00inc.GST -
Mini motor DC 5V
- Voltage : 5V
- Size : 37mm*20mm
- Good quality products
- Mainly used in robotic toys
₹15.00₹40.00inc.GSTMini motor DC 5V
₹15.00₹40.00inc.GST -
₹226.00
₹250.00inc.GSTTowerpro MG90S Micro Digital 180 Degree Servo 2.2kg
₹226.00₹250.00inc.GST -
Water Pump Micro DC 3-6V
Operating Voltage : 2.5 ~ 6V
Operating Current : 130 ~ 220mA
Flow Rate : 80 ~ 120 L/H
Maximum Lift : 40 ~ 110 mm
Continuous Working Life : 500 hours
Driving Mode : DC, Magnetic Driving
Material : Engineering Plastic
Outlet Outside Diameter : 7.5 mm
Outlet Inside Diameter : 5 mm
₹95.00₹190.00inc.GSTWater Pump Micro DC 3-6V
₹95.00₹190.00inc.GST -
Stepper Motor Nema-17
200 steps per revolution, 1.8 degrees
Bipolar stepper, requires 2 full H-bridges!
4-wire, 8 inch leads
42mm/1.65″ square body
31mm/1.22″ square mounting holes, 3mm metric screws (M3)
5mm diameter drive shaft, 24mm long, with a machined flat
12V rated voltage (you can drive it at a lower voltage, but the torque will drop) at 350mA max current
28 oz*in, 20 N*cm, 2 Kg*cm holding torque per phase
35 ohms per winding
₹630.00₹731.60inc.GSTStepper Motor Nema-17
₹630.00₹731.60inc.GST -
SG90 Servo Motors
Operating Voltage is 5V typically
Torque: 1.8 kg-cm (4.8v)
Speed: 0.10 sec/60
Gear Type: Plastic
Rotation : 0°-180°
Weight of motor : 40gm₹137.00₹180.00inc.GSTSG90 Servo Motors
₹137.00₹180.00inc.GST -
MG995 Metal Gear Servo Motor 180º Rotation TowerPro HIGH QULAITY
- High resolution
- Accurate positioning
- Fast control response
- Constant torque throughout the servo travel range
- Excellent holding power
₹352.00₹400.00inc.GSTMG995 Metal Gear Servo Motor 180º Rotation TowerPro HIGH QULAITY
₹352.00₹400.00inc.GST -
Gear Motor 12V DC 150rpm
- There are nuts and threads on shaft to easily connect and internal threaded shaft to connect it to wheel
- Features:Â 12V DC motors with Gearbox 125gm weight Same size motor available in various RPM 5kgcm torque
- No-load current = 60 mA(Max), Load current = 600 mA(Max)
₹187.00₹200.00inc.GSTGear Motor 12V DC 150rpm
₹187.00₹200.00inc.GST -
60 rpm bo motor mono shaft
- Low density: lightweight, low inertia.
- Capability to absorb shock and vibration as a result of elastic compliance.
- Ability to operate with minimum or no lubrication, due to inherent lubricity.
- The relatively low coefficient of friction.
- Operating Voltage(VDC): 3~12
- Shaft Length (mm): 8.5
- Shaft Diameter (mm): 5.5 (Double D-type)
- No Load Current: 40-180mA.
- Rated Speed(After Reduction): 60 RPM
- Rated Torque: 1 Kgcm
₹75.00₹77.00inc.GST60 rpm bo motor mono shaft
₹75.00₹77.00inc.GST
