-
DC Motor Geared (100RPM)
The metal gears have better wear and tear properties.
Gearbox is sealed and lubricated with lithium grease and requires no maintenance.
Although motor gives 100 RPM at 12V, motor runs smoothly from 4V to 12V and gives the wide range of RPM, and torque.
The shaft has a hole for better coupling.
Operating Voltage(V): 12
Rated Torque(kg-cm): 2.9
Stall Torque(kg-cm): 11.4
₹178.00₹200.00inc.GSTDC Motor Geared (100RPM)
₹178.00₹200.00inc.GST -
DC Gear motor 30 RPM
- RPM: 30.
- Operating Voltage: 12V DC
- Gearbox: Attached Plastic (spur)Gearbox
- Shaft diameter: 6mm with internal hole
- Torque: 2 kg-cm
- No-load current = 60 mA(Max)
- Load current = 300 mA(Max).
₹182.00₹200.00inc.GSTDC Gear motor 30 RPM
₹182.00₹200.00inc.GST -
Gear Motor 12V DC 150rpm
- There are nuts and threads on shaft to easily connect and internal threaded shaft to connect it to wheel
- Features:Â 12V DC motors with Gearbox 125gm weight Same size motor available in various RPM 5kgcm torque
- No-load current = 60 mA(Max), Load current = 600 mA(Max)
₹187.00₹200.00inc.GSTGear Motor 12V DC 150rpm
₹187.00₹200.00inc.GST -
Gear Motor 12V DC 60RPM
- There are nuts and threads on shaft to easily connect and internal threaded shaft to connect it to wheel
- Features:Â 12V DC motors with Gearbox 125gm weight Same size motor available in various RPM 5kgcm torque
- No-load current = 60 mA(Max), Load current = 600 mA(Max)
₹187.00₹200.00inc.GSTGear Motor 12V DC 60RPM
₹187.00₹200.00inc.GST -
12V 10RPM Geared DC Motor
- Gear Type:Â Plastic
- RPM:Â 10
- Working Voltage (VDC):Â 4-12V (12V recommended and maximum)
- Torque (kg – cm):Â 5
- Load Current Max:Â 300mA
- No-Load Current (mA):Â 60mA
₹209.00₹250.00inc.GST12V 10RPM Geared DC Motor
₹209.00₹250.00inc.GST -
₹226.00
₹250.00inc.GSTTowerpro MG90S Micro Digital 180 Degree Servo 2.2kg
₹226.00₹250.00inc.GST -
MG995 Metal Gear Servo Motor 180º Rotation TowerPro HIGH QULAITY
- High resolution
- Accurate positioning
- Fast control response
- Constant torque throughout the servo travel range
- Excellent holding power
₹352.00₹400.00inc.GSTMG995 Metal Gear Servo Motor 180º Rotation TowerPro HIGH QULAITY
₹352.00₹400.00inc.GST -
TowardPro MG996R Digital High Torque Servo Motor
- Weight: 56g
- Dimension: 40×19.7×41mm
- Stall torque: 9.4kg/cm (4.8v); 11kg/cm (6.0v)
- Operating speed: 0.19sec/60degree (4.8v); 0.15sec/60degree (6.0v)
- Operating voltage: 4.8 ~ 6.6V
- Gear Type: Metal gear
- Wire length: 32cm
₹363.00₹450.00inc.GSTTowardPro MG996R Digital High Torque Servo Motor
₹363.00₹450.00inc.GST -
₹385.00
₹500.00inc.GSTTowerPro MG995 – Continuous Rotation 360° Metal Gear Servo Motor
₹385.00₹500.00inc.GST -
A2212 10T 1400KV Brushless Motor for Drone (Soldered Connector)
- Model: A2212/10T
- Motor KV: 1400
- Max. Efficiency Current: 6-12A
- No Load Current: 0.7A @10V
- Current Capacity: 16A/60S
₹420.00₹600.00inc.GSTA2212 10T 1400KV Brushless Motor for Drone (Soldered Connector)
₹420.00₹600.00inc.GST -
Stepper Motor Nema-17
200 steps per revolution, 1.8 degrees
Bipolar stepper, requires 2 full H-bridges!
4-wire, 8 inch leads
42mm/1.65″ square body
31mm/1.22″ square mounting holes, 3mm metric screws (M3)
5mm diameter drive shaft, 24mm long, with a machined flat
12V rated voltage (you can drive it at a lower voltage, but the torque will drop) at 350mA max current
28 oz*in, 20 N*cm, 2 Kg*cm holding torque per phase
35 ohms per winding
₹630.00₹731.60inc.GSTStepper Motor Nema-17
₹630.00₹731.60inc.GST -
Nema 23 25 Kg-cm 4 Wire Bipolar Stepper Motor High Torque for 3D Printer CNC Robotics DIY Projects
1. Step Angle: 1.8 degree
2. Voltage: 2.3V
3. Current/phase: 2.8A
4. Resistance/phase: 0.98 ohms
5. Holding Torque: 10.1 kg.cm
6. Rotor Inertia: 275 g.cm2
7. Inductance/ phase (mH): 2.2
8. No. of Leads: 4
9. Weight (kg): 0.65
10. Step Angle Accuracy – (+-) 5%
11. Resistance Accuracy – (+-) 10%
12. Inductance Accuracy – (+-) 20%
13. Detent Torque (kg-cm): 0.36
14. Length (mm): 74
15. Frame Size (mm): 57×57
16. Shaft Length (mm): 19
17. Shaft Diameter (mm): 8.5
₹1260.00₹1899.00inc.GSTNema 23 25 Kg-cm 4 Wire Bipolar Stepper Motor High Torque for 3D Printer CNC Robotics DIY Projects
₹1260.00₹1899.00inc.GST
