arduino Arduino UNO R3 Board ATmega328P (DIP)
Roll over image to zoom in
₹766.00₹800.00 inc.GST (-4%)
| Model Type | UNO Rev R3 |
| Microcontroller Chip | ATmega328 |
| Operating Voltage (VDC) | 5 |
| Input Voltage(Recommended) | 7-12V |
| Input Voltage (limit) | 6-20V |
| Analog I/O Pins | 6 |
| Digital I/O Pins | 14 (of which 6 provide PWM output) |
| PWM Digital I/O Pins | 6 |
| DC Current per I/O Pin (mA) | 40 |
| DC Current for 3.3V Pin (mA) | 50 |
| Clock Speed | 16 MHz |
| SRAM (KB) | 2 |
| EEPROM | 1 KB (ATmega328) |
| Flash Memory | 32 KB |
| On Board LEDs | On/Off, L (PIN 13), TX, RX |
| Dimensions in mm (LxWxH) | 75 x 54 x 12 |
| Weight (gm) | 28 |
Customers who bought this item also bought
-
-
₹344.00
₹599.00inc.GSTArduino Nano V3 Development Board – Clone Compatible Model
₹344.00₹599.00inc.GST -
₹350.00
₹500.00inc.GSTRaspberry Pi Camera Board Module rev 1.3 5 Megapixel
₹350.00₹500.00inc.GST -
-
₹326.00
₹499.00inc.GSTNodeMCU esp8266 Wifi Internet of Things Development Board Cp2102 Iot node
₹326.00₹499.00inc.GST
The Arduino Uno R3 is a microcontroller board based on the ATmega328 . It has 14 digital input/output pins (of which 6 can be used as PWM outputs); 6 analog inputs, a 16 MHz ceramic resonator, a USB connection, a power jack, an ICSP header, and a reset button.
It contains everything needed to support the microcontroller; simply connect it to a computer with a USB cable or power it with an AC-to-DC adapter or battery to get started.
Additional information
| Weight | 200 kg |
|---|---|
| Dimensions | 10 × 6 × 1 cm |
Reviews
There are no reviews yet.