Best Seller Items
-
PAM8403 5V Two-channel Stereo Mini Class-D Audio Amplifier
- Dual channel stereo, high output power (3 w + 3 w power @ 5V and 4 ohms load)..
- Double panel wiring solves crosstalk.
- Super mini design allows it to be easily placed in a variety of digital products.
- 3W Output at 10% THD with a 4ΩLoad and 5V Power Supply.
- Filterless, Low Quiescent Current and Low EMI and Low Noise.
- Short Circuit Protection and Thermal Shutdown
₹28.00₹50.00inc.GSTPAM8403 5V Two-channel Stereo Mini Class-D Audio Amplifier
₹28.00₹50.00inc.GST -
ATMEGA328 OR ATMEGA8 Arduino breakout board PCB with components unsoldered (Colour may vary)
- High quality FR4 double side pcb.
- ATMEGA328 or ATMEGA8
₹77.00₹150.00inc.GST -
CT Current Transformer 5A mini Sensor ZMCT103C DTCT103C (Color may vary)
- Rated input current: 5A
- Rated output current: 5 mA
- Ratio: 1000: 1
- Linear range: 0-10 A (100 Ohm)
- Linearity: 0.2%
- Insulation voltage: 3000 V
₹33.00₹70.00inc.GSTCT Current Transformer 5A mini Sensor ZMCT103C DTCT103C (Color may vary)
₹33.00₹70.00inc.GST -
TPA3116D2 2.1 Channel Digital Subwoofer Amplifier Board DC, 12-24 V, 2 x 50 W + 100 W
- Applicable speaker impedance: 4-8 ohm.
- Adopts two high-quality TPA3116D2 digital amplifier chips.
- Powered by DC 12-24V, wide input voltage.
- Sound quality is very good, high efficiency and amplifying power.
- 50W x 2+100W Â 2.1 channels(left/right channel and subwoofer channel), high efficiency and low-heat.
- User can adjust the volume by themselves easily.
₹1225.00₹1899.00inc.GSTTPA3116D2 2.1 Channel Digital Subwoofer Amplifier Board DC, 12-24 V, 2 x 50 W + 100 W
₹1225.00₹1899.00inc.GST -
Piezoelectric Sensor Buzzer Transducer/Disc 27mm Piezo sensor
- Sound pressure level: 85DB 10cm
- The input voltage: 30vp-p max
- Operating Temperature: -20~70
- Clear sound
- Ultra-thin and lightweight
- Low power consumption for voltage type
₹6.00₹40.00inc.GSTPiezoelectric Sensor Buzzer Transducer/Disc 27mm Piezo sensor
₹6.00₹40.00inc.GST -
100 RPM Dual Shaft BO Motor
- Low density: lightweight, low inertia.
- Capability to absorb shock and vibration as a result of elastic compliance.
- Rated Speed(After Reduction): 100 RPM
- Rated Torque: 0.35 Kg cm
₹66.00₹100.00inc.GST100 RPM Dual Shaft BO Motor
₹66.00₹100.00inc.GST
-
USB to TTL converter UART module CH340G CH340 3.3V 5V switch
- Built-in USB to TTL Transfer chip.
- Designed to be used for USB to TTL electronic projects.
- TTL interface output, easy to connect to your MCU.
- Dual 3.3V and 5V Power output, work with 3.3v and 5 V target device.
- The mini-module is designed specifically for STC download and ARDUINO PRO supports all series of STC
₹95.00₹110.00inc.GSTUSB to TTL converter UART module CH340G CH340 3.3V 5V switch
₹95.00₹110.00inc.GST -
Water Proof Liquid Temperature Sensor – DS18B20
3.0V to 5.5V input.
Temperature range: -55 to 125°C (-67°F to 257°F).
±0.5°C Accuracy from -10°C to 85°C.
Red wire – VCC.
Black wire – GND.
Yellow wire – DATA.
Stainless steel tube 6mm diameter by 30mm long.
Cable length: 90cm.
₹99.00₹195.00inc.GSTWater Proof Liquid Temperature Sensor – DS18B20
₹99.00₹195.00inc.GST -
AC-DC Buck Converter step down Transformer power supply module SMPS
- AC-DC 5V 700mA 3.5W
- Precision Buck Converter
- AC 220v to 5v DC step down Transformer power supply module
₹99.00₹200.00inc.GSTAC-DC Buck Converter step down Transformer power supply module SMPS
₹99.00₹200.00inc.GST -
5V 10A 2 Channel Relay Module (colour may vary)
Size: 50. 6mm (l) x 38. 8mm (w) x 19. 3mm (h)
Weight: 30g
PCB color black
Around the board with 4 mounting holes, hole diameter 3. 1 mm, easy installation and fixing
Relay high quality single relay single pole double throw
A common end, a beginning, a closed-end, optical coupling isolation, good anti-interference
Low suction, high level release₹100.00₹150.00inc.GST5V 10A 2 Channel Relay Module (colour may vary)
₹100.00₹150.00inc.GST -
A4988 driver Stepper Motor Driver
- Supply Voltage : 8-35 VDC.
- Current : 1.0A Â (no heatsink ).
- Current : 2.0A (with heat-sinking).
- logic input : 3 – 5.5V .
- Automatic current decay mode detection / choice.
- Mixed with slow current decay mode.
₹100.00₹150.00inc.GSTA4988 driver Stepper Motor Driver
₹100.00₹150.00inc.GST -
Speaker 2W 8 OHM High Quality 3x3X1.5cm Loudspeaker
- Maximum output power – 2 Watts
- SIZE 32x32x17mm
- Impedance: 8 OHM
- FREQUENCY RESPONSE:150Hz-20KHz
- Smaller with Higher Power and High Sensitivity
- Â Application for Laptop PC, AIO computer, GPS, Telecom, White Goods and Medical Device
₹100.00 inc.GSTSpeaker 2W 8 OHM High Quality 3x3X1.5cm Loudspeaker
₹100.00 inc.GST -
I2C INTERFACE MODULE FOR LCD(16X2, 20X4) Micro Controller Board
- 5V power supply.
- Serial I2C control of LCD display using PCF8574.
- Backlight can be enabled or disabled via a jumper on the board.
- Contrast control via a potentiometer.
- Can have 8 modules on a single I2C bus (change address via solder jumpers)address, allowing.
- Size ：41.6 x 19.2 mm.
₹110.00₹150.00inc.GSTI2C INTERFACE MODULE FOR LCD(16X2, 20X4) Micro Controller Board
₹110.00₹150.00inc.GST -
AT89S52-24PU DIP-40 Microcontroller
- Package/Case: DIP-40
- 8K Bytes of In-System Reprogrammable Flash Memory
- Endurance: 1,000 Write/Erase Cycles
- Fully Static Operation: 0 Hz to 33 MHz
- Three-level Program Memory Lock
- 256 x 8-Bit Internal RAM
- 32 Programmable I/O Lines
- Three 16-bit Timer/Counters
- Eight Interrupt Sources
- Programmable Serial Channel
- Low Power Idle and Power Down Modes
₹113.00₹133.00inc.GSTAT89S52-24PU DIP-40 Microcontroller
₹113.00₹133.00inc.GST -
RC522 – RFID Reader / Writer with Cards Kit
- Integrated MF RC522
- 13.56MHz contactless communication card chip.
- Low-voltage, low-cost, small size of the non-contact card chip to read and write.
- Low cost, and ideal for user equipment development.
- The reader and RF card terminal design meets advanced applications development and production needs.
- Can be directly loaded into the various reader molds, very convenient.
₹115.00₹150.00inc.GSTRC522 – RFID Reader / Writer with Cards Kit
₹115.00₹150.00inc.GST -
12V Cooling Fan 80*80*25 MM
- MODEL NO -C9225M12S
- CURRENT -0.25A
- VOLTAGE 12V DC
₹119.00₹170.00inc.GST 30% off12V Cooling Fan 80*80*25 MM
₹119.00₹170.00inc.GST 30% off -
Nano 328P Expansion Adapter Breakout Board IO Shield
- Compatible with Arduino NANO.
- All digital and analog pins breakout.
- Compact size.
- External power supply current support.
- Leads all pins out, convenient for wiring and doing experiments.
₹120.00₹200.00inc.GSTNano 328P Expansion Adapter Breakout Board IO Shield
₹120.00₹200.00inc.GST -
12V DC Adapter 1 Amp (casing may vary)
AC input voltage: 100V – 240V, 50Hz / 60Hz
Output DC Voltage: 12V
Output Current: 1A
Standby power: <0.3W
₹130.00₹171.00inc.GST12V DC Adapter 1 Amp (casing may vary)
₹130.00₹171.00inc.GST -
₹130.00
₹150.00inc.GSTDHT11 Digital Relative Humidity and Temperature Sensor Module
₹130.00₹150.00inc.GST -
9V 1A DC Power supply AC Power Adaptor – SMPS Adaptor (Black)
- The adapter is easy to use.
- It comes with a long wire.
- Wide input voltage range (100VAC-280VAC).
- Very low no-load power consumption.
- Very low ripple & noise output for device safety.
₹130.00₹160.00inc.GST9V 1A DC Power supply AC Power Adaptor – SMPS Adaptor (Black)
₹130.00₹160.00inc.GST -
5V DC Adapter 1 Amp (casing may vary)
AC input voltage: 100V – 240V, 50Hz / 60Hz
Output DC Voltage: 5V
Output Current: 1A
Standby power: <0.3W
₹130.00₹171.00inc.GST5V DC Adapter 1 Amp (casing may vary)
₹130.00₹171.00inc.GST