Best Seller Items
-
PAM8403 5V Two-channel Stereo Mini Class-D Audio Amplifier
- Dual channel stereo, high output power (3 w + 3 w power @ 5V and 4 ohms load)..
- Double panel wiring solves crosstalk.
- Super mini design allows it to be easily placed in a variety of digital products.
- 3W Output at 10% THD with a 4ΩLoad and 5V Power Supply.
- Filterless, Low Quiescent Current and Low EMI and Low Noise.
- Short Circuit Protection and Thermal Shutdown
₹28.00₹50.00inc.GSTPAM8403 5V Two-channel Stereo Mini Class-D Audio Amplifier
₹28.00₹50.00inc.GST -
ATMEGA328 OR ATMEGA8 Arduino breakout board PCB with components unsoldered (Colour may vary)
- High quality FR4 double side pcb.
- ATMEGA328 or ATMEGA8
₹77.00₹150.00inc.GST -
CT Current Transformer 5A mini Sensor ZMCT103C DTCT103C (Color may vary)
- Rated input current: 5A
- Rated output current: 5 mA
- Ratio: 1000: 1
- Linear range: 0-10 A (100 Ohm)
- Linearity: 0.2%
- Insulation voltage: 3000 V
₹33.00₹70.00inc.GSTCT Current Transformer 5A mini Sensor ZMCT103C DTCT103C (Color may vary)
₹33.00₹70.00inc.GST -
TPA3116D2 2.1 Channel Digital Subwoofer Amplifier Board DC, 12-24 V, 2 x 50 W + 100 W
- Applicable speaker impedance: 4-8 ohm.
- Adopts two high-quality TPA3116D2 digital amplifier chips.
- Powered by DC 12-24V, wide input voltage.
- Sound quality is very good, high efficiency and amplifying power.
- 50W x 2+100W 2.1 channels(left/right channel and subwoofer channel), high efficiency and low-heat.
- User can adjust the volume by themselves easily.
₹1225.00₹1899.00inc.GSTTPA3116D2 2.1 Channel Digital Subwoofer Amplifier Board DC, 12-24 V, 2 x 50 W + 100 W
₹1225.00₹1899.00inc.GST -
Piezoelectric Sensor Buzzer Transducer/Disc 27mm Piezo sensor
- Sound pressure level: 85DB 10cm
- The input voltage: 30vp-p max
- Operating Temperature: -20~70
- Clear sound
- Ultra-thin and lightweight
- Low power consumption for voltage type
₹6.00₹40.00inc.GSTPiezoelectric Sensor Buzzer Transducer/Disc 27mm Piezo sensor
₹6.00₹40.00inc.GST -
100 RPM Dual Shaft BO Motor
- Low density: lightweight, low inertia.
- Capability to absorb shock and vibration as a result of elastic compliance.
- Rated Speed(After Reduction): 100 RPM
- Rated Torque: 0.35 Kg cm
₹66.00₹100.00inc.GST100 RPM Dual Shaft BO Motor
₹66.00₹100.00inc.GST
-
Heart Rate Monitor Kit with AD8232 ECG sensor module
- Designed to extract, amplify, and filter small biopotential signals.
- Leads-Off Detection.
- Shutdown Pin.
- LED Indicator.
- Analog Output.
- 3.5 mm Jack for Biomedical Pad Connection.
₹643.00₹700.00inc.GSTHeart Rate Monitor Kit with AD8232 ECG sensor module
₹643.00₹700.00inc.GST -
Current Transformer 20A CT AC CURRENT SENSOR
- Winding Ratio 1:1200
- Frequency : 50 Hz
- Recommended Burden Resistance (Ru) : 120 Ohms @ V out = 0.5 Volts.
- Maximum Primary Current (Imax) : 20 Amp.
- AC CURRENT MEASUREMENTS ONLY
- CAN NOT USE IN DC
₹94.00₹100.00inc.GSTCurrent Transformer 20A CT AC CURRENT SENSOR
₹94.00₹100.00inc.GST -
PAM8403 5V Two-channel Stereo Mini Class-D Audio Amplifier
- Dual channel stereo, high output power (3 w + 3 w power @ 5V and 4 ohms load)..
- Double panel wiring solves crosstalk.
- Super mini design allows it to be easily placed in a variety of digital products.
- 3W Output at 10% THD with a 4ΩLoad and 5V Power Supply.
- Filterless, Low Quiescent Current and Low EMI and Low Noise.
- Short Circuit Protection and Thermal Shutdown
₹28.00₹50.00inc.GSTPAM8403 5V Two-channel Stereo Mini Class-D Audio Amplifier
₹28.00₹50.00inc.GST -
Pulse Heart Beat Sensor
- A Color-Coded Cable, with a standard male header connectors. Plug it straight into an Arduino or a Breadboard. No soldering is required.
- The Pulse Sensor has 3 holes around the outside edge which make it easy to sew it into almost anything.
- Visualization software (made in Processing) to instantly see the output of the sensor and for troubleshooting.
₹181.50₹200.00inc.GSTPulse Heart Beat Sensor
₹181.50₹200.00inc.GST -
DC-DC Buck Converter 4.5-40V to 3-35V Adjustable Step Down Module
- Input voltage: 4.5-40V,
- Output voltage: (3-35V) continuously adjustable (recommended load debugging).
- Minimum pressure: 1.5V
- Output current: rated current 2A, 3A maximum
- Output Power: 15W maximum
₹66.00₹199.00inc.GSTDC-DC Buck Converter 4.5-40V to 3-35V Adjustable Step Down Module
₹66.00₹199.00inc.GST -
solar panel in square shape/mini solar panel /70mm*70mm /6v,100ampere
Material – silicon
Type – Polycrystalline
No. of cells – 1
Solar power-0.6
Output voltage -6
₹60.50₹100.00inc.GSTsolar panel in square shape/mini solar panel /70mm*70mm /6v,100ampere
₹60.50₹100.00inc.GST -
12V DC 1/2″ Electric Solenoid Water Air Valve Switch (Normally Closed)
- Rated Operating Voltage: 12V DC.
- Rated Current: 0.6A.
- Operation Mode: NC (Normally Closed).
- Pressure: 0.02 – 0.8MPa.
- Max fluid temperature: 100°C.
₹472.00₹500.00inc.GST12V DC 1/2″ Electric Solenoid Water Air Valve Switch (Normally Closed)
₹472.00₹500.00inc.GST -
1/2” Water Flow Sensor 1-30L/min Hall Flowmeter Temperature sensor
- Mainly used for water testing, water cooling system
- Application: Water heaters, credit card machines, water vending machine, flow measurement device
- High amplitude: ≥ 4.6V
- Low amplitude: ≤ 0.5V
- Electric strength: 1250V/min
- Insulation resistance: ≥ 100MΩ
- Hydrostatic pressure testing: ≤ 2.0Mpa
₹295.00₹350.00inc.GST1/2” Water Flow Sensor 1-30L/min Hall Flowmeter Temperature sensor
₹295.00₹350.00inc.GST -
Valve 12v-24v DC
- Operating Voltage: 12V / 24V DC.
- Current Requirement: 400 mA.
- Connections: Push Fit Type.
- Nozzle Diameter: 6.3 mm.
- Normally Closed Valve.
₹212.40₹250.00inc.GSTValve 12v-24v DC
₹212.40₹250.00inc.GST -
ST Link V2 Programmer For STM8 and STM32 ( color may vary )
- PCB installed inside of aluminum alloy U disk shell, portable, safe and reliable!
- Interface definition directly marked on the shell, clear, convenient and practical!
- 5V, 3.3V offers at the same time, allowing you to program your target board with both 5V and 3.3V.
- SWIM cable for connection to the application via a pin header or a 2.54 mm pitch connector.
- SWIM programming speed rate: 9.7 Kbytes/s in low speed and 12.8 Kbytes/s in high speed.
₹650.00 inc.GSTST Link V2 Programmer For STM8 and STM32 ( color may vary )
₹650.00 inc.GST -
Raspberry Pi 4 Model B with 2 GB RAM
- 2GB/4GB Varients.
- Quad-Core 64-bit Broadcom 2711, Cortex A72 Processor.
- WLAN 802.11 b/g/n/ac (2,4 + 5,0 GHz).
- LAN RJ45 10/100/1000 Mbit (Gigabit LAN over USB 3.0).
- Operating Power 5V@3A via USB Type-C Port.
₹4305.00₹4500.00inc.GSTRaspberry Pi 4 Model B with 2 GB RAM
₹4305.00₹4500.00inc.GST -
Nema 23 25 Kg-cm 4 Wire Bipolar Stepper Motor High Torque for 3D Printer CNC Robotics DIY Projects
1. Step Angle: 1.8 degree
2. Voltage: 2.3V
3. Current/phase: 2.8A
4. Resistance/phase: 0.98 ohms
5. Holding Torque: 10.1 kg.cm
6. Rotor Inertia: 275 g.cm2
7. Inductance/ phase (mH): 2.2
8. No. of Leads: 4
9. Weight (kg): 0.65
10. Step Angle Accuracy – (+-) 5%
11. Resistance Accuracy – (+-) 10%
12. Inductance Accuracy – (+-) 20%
13. Detent Torque (kg-cm): 0.36
14. Length (mm): 74
15. Frame Size (mm): 57×57
16. Shaft Length (mm): 19
17. Shaft Diameter (mm): 8.5
₹1260.00₹1899.00inc.GSTNema 23 25 Kg-cm 4 Wire Bipolar Stepper Motor High Torque for 3D Printer CNC Robotics DIY Projects
₹1260.00₹1899.00inc.GST -
Arduino LilyPad 328 ATmega328P Board
- Microcontroller: ATmega168 or ATmega328V
- Operating Voltage: 2.7-5.5 V
- Digital I/O Pins: 14
- PWM Channels: 6
- Analog Input Channels: 6
- DC Current per I/O Pin: 40 mA
- Board will run from 2V to 5V.
- The latest version of the LilyPad supports automatic reset for even easier programming.
- The back side of the LilyPad is now completely flat.
₹265.00₹300.00inc.GSTArduino LilyPad 328 ATmega328P Board
₹265.00₹300.00inc.GST -
₹226.00
₹250.00inc.GSTTowerpro MG90S Micro Digital 180 Degree Servo 2.2kg
₹226.00₹250.00inc.GST -
₹385.00
₹500.00inc.GSTTowerPro MG995 – Continuous Rotation 360° Metal Gear Servo Motor
₹385.00₹500.00inc.GST -
₹33.00
₹50.00inc.GSTCartoon Ultrasonic Sensor Mounting Bracket For HC-SR04
₹33.00₹50.00inc.GST