Best Seller Items
-
PAM8403 5V Two-channel Stereo Mini Class-D Audio Amplifier
- Dual channel stereo, high output power (3 w + 3 w power @ 5V and 4 ohms load)..
- Double panel wiring solves crosstalk.
- Super mini design allows it to be easily placed in a variety of digital products.
- 3W Output at 10% THD with a 4ΩLoad and 5V Power Supply.
- Filterless, Low Quiescent Current and Low EMI and Low Noise.
- Short Circuit Protection and Thermal Shutdown
₹28.00₹50.00inc.GSTPAM8403 5V Two-channel Stereo Mini Class-D Audio Amplifier
₹28.00₹50.00inc.GST -
ATMEGA328 OR ATMEGA8 Arduino breakout board PCB with components unsoldered (Colour may vary)
- High quality FR4 double side pcb.
- ATMEGA328 or ATMEGA8
₹77.00₹150.00inc.GST -
CT Current Transformer 5A mini Sensor ZMCT103C DTCT103C (Color may vary)
- Rated input current: 5A
- Rated output current: 5 mA
- Ratio: 1000: 1
- Linear range: 0-10 A (100 Ohm)
- Linearity: 0.2%
- Insulation voltage: 3000 V
₹33.00₹70.00inc.GSTCT Current Transformer 5A mini Sensor ZMCT103C DTCT103C (Color may vary)
₹33.00₹70.00inc.GST -
TPA3116D2 2.1 Channel Digital Subwoofer Amplifier Board DC, 12-24 V, 2 x 50 W + 100 W
- Applicable speaker impedance: 4-8 ohm.
- Adopts two high-quality TPA3116D2 digital amplifier chips.
- Powered by DC 12-24V, wide input voltage.
- Sound quality is very good, high efficiency and amplifying power.
- 50W x 2+100W Â 2.1 channels(left/right channel and subwoofer channel), high efficiency and low-heat.
- User can adjust the volume by themselves easily.
₹1225.00₹1899.00inc.GSTTPA3116D2 2.1 Channel Digital Subwoofer Amplifier Board DC, 12-24 V, 2 x 50 W + 100 W
₹1225.00₹1899.00inc.GST -
Piezoelectric Sensor Buzzer Transducer/Disc 27mm Piezo sensor
- Sound pressure level: 85DB 10cm
- The input voltage: 30vp-p max
- Operating Temperature: -20~70
- Clear sound
- Ultra-thin and lightweight
- Low power consumption for voltage type
₹6.00₹40.00inc.GSTPiezoelectric Sensor Buzzer Transducer/Disc 27mm Piezo sensor
₹6.00₹40.00inc.GST -
100 RPM Dual Shaft BO Motor
- Low density: lightweight, low inertia.
- Capability to absorb shock and vibration as a result of elastic compliance.
- Rated Speed(After Reduction): 100 RPM
- Rated Torque: 0.35 Kg cm
₹66.00₹100.00inc.GST100 RPM Dual Shaft BO Motor
₹66.00₹100.00inc.GST
-
-
CNC 3D Printer Mech Endstop Limit Switch
- Wire type:Â 22AWG
- Working voltage: 300V
- Working Current: 2A
- Temperature resistance: 80° C
- Cable length: 70cm
₹46.00₹150.00inc.GSTCNC 3D Printer Mech Endstop Limit Switch
₹46.00₹150.00inc.GST -
ULN2003 Driver Module Stepper Motor Driver Board
- ULN2003A motor driver chip
- Chip all the pins already leads for easy connection to use
- 5-12V power supply
- 4-way signal indicator
- Step angle: 5.625 x 1 / 64
- Reduction ratio: 1 / 64
- Phase: 4
- Current / Phase: 5V
₹45.00₹399.00inc.GSTULN2003 Driver Module Stepper Motor Driver Board
₹45.00₹399.00inc.GST -
High RPM Drone Motor (single motor)
- Model: 615
- Shaft Size: 1.0 mm
- Rated Voltage: 3.7 V.
- Rated RPM: 60000.
- Wire Length: 6cm
- Prop. Length: 55mm
- Prop. Material: Glass Fiber
₹45.00₹95.00inc.GSTHigh RPM Drone Motor (single motor)
₹45.00₹95.00inc.GST -
4×3 Matrix Keypad
- Ultra-thin design & adhesive backing provides easy integration to any project
- Excellent price-performance ratio
- Easy communication with any microcontroller
- Sticker can peel off for adhesive mounting.
₹44.00₹90.00inc.GST 51% off4×3 Matrix Keypad
₹44.00₹90.00inc.GST 51% off -
ATMEGA8 Arduino breakout board
- Inbuilt crystal 16mhz
- 22 pf capacitor
₹43.00₹80.00inc.GSTATMEGA8 Arduino breakout board
₹43.00₹80.00inc.GST -
Vibration Sensor Module SW520D
- The working voltage of 3.3V-5V.
- The comparator output, the signal clean, good waveform, driving ability, more than 15mA
- With a fixed bolt hole, easy to install.
- The use of wide voltage LM393 comparator.
₹42.00₹70.00inc.GSTVibration Sensor Module SW520D
₹42.00₹70.00inc.GST -
₹40.00
₹50.00inc.GST2.1×5.5mm DC Power Jack Socket Panel Mount (Female) -5 pieces
₹40.00₹50.00inc.GST -
HC49/U 16MHz Crystal Oscillator
- Frequency: 16 MHz
- Tolerance: 30%
- Operating Temperature Range: -10°C to +60°C
- Storage Temperature Range: -20°C to +70°C
₹40.00₹60.00inc.GSTHC49/U 16MHz Crystal Oscillator
₹40.00₹60.00inc.GST -
65mm Robot Wheel ( tyre ) for BO Motors (Yellow)
- Tire with sponge liner for more strength
- New design wheel for better combination with the motor
- Diameter: 65 mm
- Width : 28 mm
- The material of Wheel: High-strength plastic
- The material of Tyre : Rubber
- Color: Yellow
₹40.00₹55.00inc.GST65mm Robot Wheel ( tyre ) for BO Motors (Yellow)
₹40.00₹55.00inc.GST -
Infrared ( IR sensor ) Module
Active High digital Output ( 5V)
3mm Mounting hole for easy mounting
Can be used for multitude of applications
Compatible with almost all microcontrollers with digital input
Two onboard LED’s
Calibration Pot
Great for DIY projects and Arduino beginners
Easy to use breadboard friendly form factor₹38.00₹47.00inc.GSTInfrared ( IR sensor ) Module
₹38.00₹47.00inc.GST -
Digital LDR Module
- LM393 based design.
- Can detect ambient brightness and light intensity.
- Adjustable sensitivity (via blue digital potentiometer adjustment).
- Output Digital – 0V to 5V, Adjustable trigger level from preset.
- LEDs indicating output and power.
- Operating Voltage: 3.3V to 5V DC.
- Operating Current: 15ma.
₹37.00₹70.00inc.GSTDigital LDR Module
₹37.00₹70.00inc.GST -
-
Laser Module 650NM 5V
- Voltage: 3.0 V – 5 V.
- Driver: APC circuit.
- Line length: about 135 mm.
- Transmit power: 58mW.
- Operating Current: 40mA.
- Operating Current: 40mA.
- Operating temperature: -36â—¦C ~ 65â—¦C.
₹36.00₹108.00inc.GSTLaser Module 650NM 5V
₹36.00₹108.00inc.GST -
Center Shaft Gear Motor L Clamp -2pcs
- Material: Mild Steel
- Thickness: 2 mm
- Motor Mounting Hole: 13.5 mm
- Bracket Mounting Hole: 3 mm
- Weight: 26 gm (each
₹36.00₹50.00inc.GSTCenter Shaft Gear Motor L Clamp -2pcs
₹36.00₹50.00inc.GST