Best Seller Items
-
PAM8403 5V Two-channel Stereo Mini Class-D Audio Amplifier
- Dual channel stereo, high output power (3 w + 3 w power @ 5V and 4 ohms load)..
- Double panel wiring solves crosstalk.
- Super mini design allows it to be easily placed in a variety of digital products.
- 3W Output at 10% THD with a 4ΩLoad and 5V Power Supply.
- Filterless, Low Quiescent Current and Low EMI and Low Noise.
- Short Circuit Protection and Thermal Shutdown
₹28.00₹50.00inc.GSTPAM8403 5V Two-channel Stereo Mini Class-D Audio Amplifier
₹28.00₹50.00inc.GST -
ATMEGA328 OR ATMEGA8 Arduino breakout board PCB with components unsoldered (Colour may vary)
- High quality FR4 double side pcb.
- ATMEGA328 or ATMEGA8
₹77.00₹150.00inc.GST -
CT Current Transformer 5A mini Sensor ZMCT103C DTCT103C (Color may vary)
- Rated input current: 5A
- Rated output current: 5 mA
- Ratio: 1000: 1
- Linear range: 0-10 A (100 Ohm)
- Linearity: 0.2%
- Insulation voltage: 3000 V
₹33.00₹70.00inc.GSTCT Current Transformer 5A mini Sensor ZMCT103C DTCT103C (Color may vary)
₹33.00₹70.00inc.GST -
TPA3116D2 2.1 Channel Digital Subwoofer Amplifier Board DC, 12-24 V, 2 x 50 W + 100 W
- Applicable speaker impedance: 4-8 ohm.
- Adopts two high-quality TPA3116D2 digital amplifier chips.
- Powered by DC 12-24V, wide input voltage.
- Sound quality is very good, high efficiency and amplifying power.
- 50W x 2+100W Â 2.1 channels(left/right channel and subwoofer channel), high efficiency and low-heat.
- User can adjust the volume by themselves easily.
₹1225.00₹1899.00inc.GSTTPA3116D2 2.1 Channel Digital Subwoofer Amplifier Board DC, 12-24 V, 2 x 50 W + 100 W
₹1225.00₹1899.00inc.GST -
Piezoelectric Sensor Buzzer Transducer/Disc 27mm Piezo sensor
- Sound pressure level: 85DB 10cm
- The input voltage: 30vp-p max
- Operating Temperature: -20~70
- Clear sound
- Ultra-thin and lightweight
- Low power consumption for voltage type
₹6.00₹40.00inc.GSTPiezoelectric Sensor Buzzer Transducer/Disc 27mm Piezo sensor
₹6.00₹40.00inc.GST -
100 RPM Dual Shaft BO Motor
- Low density: lightweight, low inertia.
- Capability to absorb shock and vibration as a result of elastic compliance.
- Rated Speed(After Reduction): 100 RPM
- Rated Torque: 0.35 Kg cm
₹66.00₹100.00inc.GST100 RPM Dual Shaft BO Motor
₹66.00₹100.00inc.GST
-
5v relay module
- Microcontroller development board can be used as modules, can be used as appliance control
- 5V – 12 V control signal of the TTL
- Control DC or AC signals can control the 220V AC Load
- there is a normally open and open normally closed contact
- Useful to control a motor, a LED strip, or any other module using arduino. How to use it: Just connect a digital output of your arduino to your relay module, and you can control a power-demanding appliance with the digital signal provided by your arduino
₹57.75₹90.00inc.GST5v relay module
₹57.75₹90.00inc.GST -
High RPM Drone Motor (single motor)
- Model: 615
- Shaft Size: 1.0 mm
- Rated Voltage: 3.7 V.
- Rated RPM: 60000.
- Wire Length: 6cm
- Prop. Length: 55mm
- Prop. Material: Glass Fiber
₹45.00₹95.00inc.GSTHigh RPM Drone Motor (single motor)
₹45.00₹95.00inc.GST -
Mini motor DC 5V
- Voltage : 5V
- Size : 37mm*20mm
- Good quality products
- Mainly used in robotic toys
₹15.00₹40.00inc.GSTMini motor DC 5V
₹15.00₹40.00inc.GST -
Single pin type USB C Data/Charging Cable Ubon WR-267
- WR-267
- LENGTH 1 METER (100CM)
₹79.00₹150.00inc.GSTSingle pin type USB C Data/Charging Cable Ubon WR-267
₹79.00₹150.00inc.GST -
Current Transformer 20A CT AC CURRENT SENSOR
- Winding Ratio 1:1200
- Frequency : 50 Hz
- Recommended Burden Resistance (Ru) : 120 Ohms @ V out = 0.5 Volts.
- Maximum Primary Current (Imax) : 20 Amp.
- AC CURRENT MEASUREMENTS ONLY
- CAN NOT USE IN DC
₹94.00₹100.00inc.GSTCurrent Transformer 20A CT AC CURRENT SENSOR
₹94.00₹100.00inc.GST -
solar panel in square shape/mini solar panel /70mm*70mm /6v,100ampere
Material – silicon
Type – Polycrystalline
No. of cells – 1
Solar power-0.6
Output voltage -6
₹60.50₹100.00inc.GSTsolar panel in square shape/mini solar panel /70mm*70mm /6v,100ampere
₹60.50₹100.00inc.GST -
Piezoelectric Sensor Buzzer Transducer/Disc 27mm Piezo sensor
- Sound pressure level: 85DB 10cm
- The input voltage: 30vp-p max
- Operating Temperature: -20~70
- Clear sound
- Ultra-thin and lightweight
- Low power consumption for voltage type
₹6.00₹40.00inc.GSTPiezoelectric Sensor Buzzer Transducer/Disc 27mm Piezo sensor
₹6.00₹40.00inc.GST -
Reed Switch Magnetic Control Reed Switch -Normally Open Contact
- Small Module.
- Very easy to use.
- Glass Length:Â 14mm
- Glass Diameter:Â 2mm
- Total Length:Â 45mm
- Max. Switching Voltage: 300 VDC
- Min. Breakdown Voltage: 150 VDC
- Max. Contact Rating:Â 10W
- Max. Switching Current: 0.55 A
₹25.00₹39.00inc.GSTReed Switch Magnetic Control Reed Switch -Normally Open Contact
₹25.00₹39.00inc.GST -
Screw driver flat
- 2 in 1 screwdriver.
- Interchangeable heads.
- Ideal for assembling and disassembling robot car kits.
- Length: 128mm.
- Width: 14.5mm.
₹10.00₹20.00inc.GSTScrew driver flat
₹10.00₹20.00inc.GST -
5V 10A 2 Channel Relay Module (colour may vary)
Size: 50. 6mm (l) x 38. 8mm (w) x 19. 3mm (h)
Weight: 30g
PCB color black
Around the board with 4 mounting holes, hole diameter 3. 1 mm, easy installation and fixing
Relay high quality single relay single pole double throw
A common end, a beginning, a closed-end, optical coupling isolation, good anti-interference
Low suction, high level release₹100.00₹150.00inc.GST5V 10A 2 Channel Relay Module (colour may vary)
₹100.00₹150.00inc.GST -
ATMEGA328 OR ATMEGA8 Arduino breakout board PCB with components unsoldered (Colour may vary)
- High quality FR4 double side pcb.
- ATMEGA328 or ATMEGA8
₹77.00₹150.00inc.GST -
Nema 23 25 Kg-cm 4 Wire Bipolar Stepper Motor High Torque for 3D Printer CNC Robotics DIY Projects
1. Step Angle: 1.8 degree
2. Voltage: 2.3V
3. Current/phase: 2.8A
4. Resistance/phase: 0.98 ohms
5. Holding Torque: 10.1 kg.cm
6. Rotor Inertia: 275 g.cm2
7. Inductance/ phase (mH): 2.2
8. No. of Leads: 4
9. Weight (kg): 0.65
10. Step Angle Accuracy – (+-) 5%
11. Resistance Accuracy – (+-) 10%
12. Inductance Accuracy – (+-) 20%
13. Detent Torque (kg-cm): 0.36
14. Length (mm): 74
15. Frame Size (mm): 57×57
16. Shaft Length (mm): 19
17. Shaft Diameter (mm): 8.5
₹1260.00₹1899.00inc.GSTNema 23 25 Kg-cm 4 Wire Bipolar Stepper Motor High Torque for 3D Printer CNC Robotics DIY Projects
₹1260.00₹1899.00inc.GST -
₹350.00
₹525.00inc.GSTArduino UNO SMD R3 ATmega328p
₹350.00₹525.00inc.GST -
TP4056/TC4056 1A Li-Ion Lithium Battery Charging Module (Micro B USB)
- Input voltage : 4.5V ~ 5.5V.
- Input Interface: Micro USB port.
- A full charge voltage: 4.2V.
- Charging accuracy: 1.5%.
- Charging method: linear charge.
- Power: 4.2 w.
- Operating Temperature: -10 to +85ºC
- Charging indicator: LED indicators for charging and full charging.
₹25.00₹50.00inc.GSTTP4056/TC4056 1A Li-Ion Lithium Battery Charging Module (Micro B USB)
₹25.00₹50.00inc.GST -
Arduino uno Cable
Use it to connect Arduino Uno, Arduino Mega 2560, Arduino 101 or any board with the USB female A port of your computer.
Cable color and shape may vary slightly from image as our stock rotates.
USB cable type: A/B Standard USB 2.0 cable.
₹33.00₹53.10inc.GSTArduino uno Cable
₹33.00₹53.10inc.GST -
Stepper Motor Nema-17
200 steps per revolution, 1.8 degrees
Bipolar stepper, requires 2 full H-bridges!
4-wire, 8 inch leads
42mm/1.65″ square body
31mm/1.22″ square mounting holes, 3mm metric screws (M3)
5mm diameter drive shaft, 24mm long, with a machined flat
12V rated voltage (you can drive it at a lower voltage, but the torque will drop) at 350mA max current
28 oz*in, 20 N*cm, 2 Kg*cm holding torque per phase
35 ohms per winding
₹630.00₹731.60inc.GSTStepper Motor Nema-17
₹630.00₹731.60inc.GST