Best Seller Items
-
PAM8403 5V Two-channel Stereo Mini Class-D Audio Amplifier
- Dual channel stereo, high output power (3 w + 3 w power @ 5V and 4 ohms load)..
- Double panel wiring solves crosstalk.
- Super mini design allows it to be easily placed in a variety of digital products.
- 3W Output at 10% THD with a 4ΩLoad and 5V Power Supply.
- Filterless, Low Quiescent Current and Low EMI and Low Noise.
- Short Circuit Protection and Thermal Shutdown
₹28.00₹50.00inc.GSTPAM8403 5V Two-channel Stereo Mini Class-D Audio Amplifier
₹28.00₹50.00inc.GST -
ATMEGA328 OR ATMEGA8 Arduino breakout board PCB with components unsoldered (Colour may vary)
- High quality FR4 double side pcb.
- ATMEGA328 or ATMEGA8
₹77.00₹150.00inc.GST -
CT Current Transformer 5A mini Sensor ZMCT103C DTCT103C (Color may vary)
- Rated input current: 5A
- Rated output current: 5 mA
- Ratio: 1000: 1
- Linear range: 0-10 A (100 Ohm)
- Linearity: 0.2%
- Insulation voltage: 3000 V
₹33.00₹70.00inc.GSTCT Current Transformer 5A mini Sensor ZMCT103C DTCT103C (Color may vary)
₹33.00₹70.00inc.GST -
TPA3116D2 2.1 Channel Digital Subwoofer Amplifier Board DC, 12-24 V, 2 x 50 W + 100 W
- Applicable speaker impedance: 4-8 ohm.
- Adopts two high-quality TPA3116D2 digital amplifier chips.
- Powered by DC 12-24V, wide input voltage.
- Sound quality is very good, high efficiency and amplifying power.
- 50W x 2+100W 2.1 channels(left/right channel and subwoofer channel), high efficiency and low-heat.
- User can adjust the volume by themselves easily.
₹1225.00₹1899.00inc.GSTTPA3116D2 2.1 Channel Digital Subwoofer Amplifier Board DC, 12-24 V, 2 x 50 W + 100 W
₹1225.00₹1899.00inc.GST -
Piezoelectric Sensor Buzzer Transducer/Disc 27mm Piezo sensor
- Sound pressure level: 85DB 10cm
- The input voltage: 30vp-p max
- Operating Temperature: -20~70
- Clear sound
- Ultra-thin and lightweight
- Low power consumption for voltage type
₹6.00₹40.00inc.GSTPiezoelectric Sensor Buzzer Transducer/Disc 27mm Piezo sensor
₹6.00₹40.00inc.GST -
100 RPM Dual Shaft BO Motor
- Low density: lightweight, low inertia.
- Capability to absorb shock and vibration as a result of elastic compliance.
- Rated Speed(After Reduction): 100 RPM
- Rated Torque: 0.35 Kg cm
₹66.00₹100.00inc.GST100 RPM Dual Shaft BO Motor
₹66.00₹100.00inc.GST
-
USB ASP AVR Programming Device for ATMEL Processors
- Compatible Chips:
- ATMega Series
- Tiny Series
- Classic Series
- CAN Series
- PWM Series
₹350.00 inc.GSTUSB ASP AVR Programming Device for ATMEL Processors
₹350.00 inc.GST - Compatible Chips:
-
₹350.00
₹525.00inc.GSTArduino UNO SMD R3 ATmega328p
₹350.00₹525.00inc.GST -
Raspberry Pi Camera Board Module rev 1.3 5 Megapixel
Second generation raspberry pi camera module with fixed focus lens
Features official raspberry pi camera module v2 1080p
2592 x 1944 pixel static images, This module is only capable of taking pictures and video, not sound,1080p30 video₹350.00₹500.00inc.GSTRaspberry Pi Camera Board Module rev 1.3 5 Megapixel
₹350.00₹500.00inc.GST -
Arduino Nano V3 Development Board – Clone Compatible Model
- Microcontroller ATmega328.
- Operating Voltage (logic level): 5 V.
- Input Voltage (Recommended): 7-12 V.
- Input Voltage (limits): 6-20 V.
- Digital I/O Pins : 14 (of which 6 provide PWM Output)
- Analog Input Pins: 8.
- DC Current per I/O Pin: 40 mA.
- Flash Memory 32 KB (ATmega328) of which 2 KB used by bootloader.
₹344.00₹599.00inc.GSTArduino Nano V3 Development Board – Clone Compatible Model
₹344.00₹599.00inc.GST -
Thermo Couple
Range : up to 1000 deg. C
Service condition : Immersed in sodium/air upto 500 deg. C
Conductor material : Nickel chromium/ Nickel aluminium
Type of Hot junction : Insulated
Sensitivity : 41 micro volts / deg. C
The accuracy of the measured value shall be better than or equal to
- a) ± 1.0 deg C for values upto 350oC
- b) ± 0.4 % for values beyond 350oC
Sheath material : AISI 316L
Insulation : Magnesium oxide
Length of the thermocouple :As per table 1.
Termination for cold end :The thermocouple shall be supplied with ready mounted plug type connector. The specification of the connector is as per clause 3.0
₹333.94₹359.90inc.GSTThermo Couple
₹333.94₹359.90inc.GST -
DHT22 Digital Temperature and Humidity Sensor Module AM2302
- Measuring range: temperature -40-80 ℃; humidity 0; 99.9%RH
- Measurement accuracy (25℃): temperature: + 0.5; humidity: + 2%RH (10; 90%RH)
- Resolution: temperature: 0.1 ℃, humidity: 0.1%RH
- Attenuation value: temperature: <1℃ / year; humidity: < 1%RH/ years
- High precision
- Capacitive type
- Full range temperature compensated
- Relative humidity and temperature measurement
- Calibrated digital signal
- Outstanding long-term stability
₹329.00₹500.00inc.GSTDHT22 Digital Temperature and Humidity Sensor Module AM2302
₹329.00₹500.00inc.GST -
NodeMCU esp8266 Wifi Internet of Things Development Board Cp2102 Iot node
NodeMCU DEVKIT 1.0 Specification:
Developer : ESP8266 Opensource Community
Type : Single-board microcontroller
Operating system : XTOS
CPU : ESP8266
Memory : 128kBytes
Storage : 4MBytes
Power By : USB
Power Voltage : 3v ,5v (used with 3.3v Regulator which inbuilt on Board using Pin VIN)
Code : Arduino Cpp
IDE Used : Arduino IDE
GPIO : 10₹326.00₹499.00inc.GSTNodeMCU esp8266 Wifi Internet of Things Development Board Cp2102 Iot node
₹326.00₹499.00inc.GST -
PIC16F877A-I/P DIP40 Microcontroller MCP
The PIC16F877A is a 28/40/44-Pin Enhanced Flash Microcontrollers . The following are the features:-
• Timer0: 8-bit timer/counter with 8-bit prescaler
• Timer1: 16-bit timer/counter with prescaler, can be incremented during Sleep via external crystal/clock
• Timer2: 8-bit timer/counter with 8-bit period register, prescaler and postscaler
• Two Capture, Compare, PWM modules
– Capture is 16-bit, max. resolution is 12.5 ns
– Compare is 16-bit, max. resolution is 200 ns
– PWM max. resolution is 10-bit
• Synchronous Serial Port (SSP) with SPI (Master mode) and I2C™ (Master/Slave)
Universal Synchronous Asynchronous Receiver Transmitter (USART/SCI) with 9-bit address detection
• Parallel Slave Port (PSP) – 8 bits wide with external RD, WR and CS controls (40/44-pin only)
• Brown-out detection circuitry for Brown-out Reset (BOR)
₹312.00₹330.00inc.GSTPIC16F877A-I/P DIP40 Microcontroller MCP
₹312.00₹330.00inc.GST -
Arduino Pro Mini Atmega328 ProMini
- Microcontroller: ATmega328
- Circuit Operating Voltage: 5V
- Clock frequency: 16MHz.
- Digital I/O Pins: 14
- 8 analog input port: A0 ~ A7.
- A pair of TTL level serial port transceiver : RX / TX.
- 6 PWM port: D3, D5, D6, D9, D10, D11.
- Support serial download.
₹308.00₹350.00inc.GSTArduino Pro Mini Atmega328 ProMini
₹308.00₹350.00inc.GST -
GPS module (NEO-6M GPS )
Interface: UART interface, with logical level converter, 3.3V-5V interface compatible
SunRobotics ublox neo-6m gps module (3.3V-5V interface with eeprom and flash)
Board size: 23mm*40mm
Antenna: High gain active anttenna and good performance. 25mm*25mm₹300.00₹700.00inc.GSTGPS module (NEO-6M GPS )
₹300.00₹700.00inc.GST -
1/2” Water Flow Sensor 1-30L/min Hall Flowmeter Temperature sensor
- Mainly used for water testing, water cooling system
- Application: Water heaters, credit card machines, water vending machine, flow measurement device
- High amplitude: ≥ 4.6V
- Low amplitude: ≤ 0.5V
- Electric strength: 1250V/min
- Insulation resistance: ≥ 100MΩ
- Hydrostatic pressure testing: ≤ 2.0Mpa
₹295.00₹350.00inc.GST1/2” Water Flow Sensor 1-30L/min Hall Flowmeter Temperature sensor
₹295.00₹350.00inc.GST -
EM18 RFID reader
5VDC through USB (External 5V supply will boost range of the module)
Current: <50mA
Operating Frequency: 125Khz
Read Distance: 10cm
Size of RFID reader module: 32mm(length) * 32mm(width) * 8mm(height)
₹280.00₹354.00inc.GSTEM18 RFID reader
₹280.00₹354.00inc.GST -
Bluetooth module HC-05
- Bluetooth protocal: Bluetooth Specification v2.0 EDR.
- Frequency: 2.4GHz ISM band.
- Modulation: GFSK(Gaussian Frequency Shift Keying)
- Emission power: ≤4dBm, Class 2.
- Sensitivity: ≤-84dBm at 0.1% BER.
- Speed: Asynchronous: 2.1Mbps(Max) / 160 kbps, Synchronous: 1Mbps/1Mbps.
₹278.00₹336.30inc.GSTBluetooth module HC-05
₹278.00₹336.30inc.GST -
0.96 INCH 4PIN WHITE OLED Display Module
- Driver IC: SSD1306
- Resolution: 128 x 64
- Visual Angle: >160°
- Input Voltage: 3.3V ~ 6V
- Only Need 2 I/O Port Control
₹275.00₹400.00inc.GST0.96 INCH 4PIN WHITE OLED Display Module
₹275.00₹400.00inc.GST -
STM32F103C676 Development Board ARM Core Module
Experience powerful and efficient programming with the STM32F103C676 Development Board. Featuring an STM32F103C676 MCU, this board is perfect for embedded system projects, IoT applications, and more.
₹270.00₹350.00inc.GSTSTM32F103C676 Development Board ARM Core Module
₹270.00₹350.00inc.GST -
NodeMCU CH340 V3 WI-FI IOT lua board ESP8266
- Power input: 4.5V ~ 9V (10VMAX), USB-powered
- Transfer rate: 110-460800bps
- Support UART / GPIO data communication interface
- Support Smart Link Smart Networking
- Working temperature: -40°C ~ + 125°C
- Drive Type: Dual high-power H-bridge
- A great set of tools to develop ESP8266
- Flash size: 4MByte
- Lowest cost WI-FI
₹270.00₹350.00inc.GSTNodeMCU CH340 V3 WI-FI IOT lua board ESP8266
₹270.00₹350.00inc.GST