Best Seller Items
-
PAM8403 5V Two-channel Stereo Mini Class-D Audio Amplifier
- Dual channel stereo, high output power (3 w + 3 w power @ 5V and 4 ohms load)..
- Double panel wiring solves crosstalk.
- Super mini design allows it to be easily placed in a variety of digital products.
- 3W Output at 10% THD with a 4ΩLoad and 5V Power Supply.
- Filterless, Low Quiescent Current and Low EMI and Low Noise.
- Short Circuit Protection and Thermal Shutdown
₹28.00₹50.00inc.GSTPAM8403 5V Two-channel Stereo Mini Class-D Audio Amplifier
₹28.00₹50.00inc.GST -
ATMEGA328 OR ATMEGA8 Arduino breakout board PCB with components unsoldered (Colour may vary)
- High quality FR4 double side pcb.
- ATMEGA328 or ATMEGA8
₹77.00₹150.00inc.GST -
CT Current Transformer 5A mini Sensor ZMCT103C DTCT103C (Color may vary)
- Rated input current: 5A
- Rated output current: 5 mA
- Ratio: 1000: 1
- Linear range: 0-10 A (100 Ohm)
- Linearity: 0.2%
- Insulation voltage: 3000 V
₹33.00₹70.00inc.GSTCT Current Transformer 5A mini Sensor ZMCT103C DTCT103C (Color may vary)
₹33.00₹70.00inc.GST -
TPA3116D2 2.1 Channel Digital Subwoofer Amplifier Board DC, 12-24 V, 2 x 50 W + 100 W
- Applicable speaker impedance: 4-8 ohm.
- Adopts two high-quality TPA3116D2 digital amplifier chips.
- Powered by DC 12-24V, wide input voltage.
- Sound quality is very good, high efficiency and amplifying power.
- 50W x 2+100W Â 2.1 channels(left/right channel and subwoofer channel), high efficiency and low-heat.
- User can adjust the volume by themselves easily.
₹1225.00₹1899.00inc.GSTTPA3116D2 2.1 Channel Digital Subwoofer Amplifier Board DC, 12-24 V, 2 x 50 W + 100 W
₹1225.00₹1899.00inc.GST -
Piezoelectric Sensor Buzzer Transducer/Disc 27mm Piezo sensor
- Sound pressure level: 85DB 10cm
- The input voltage: 30vp-p max
- Operating Temperature: -20~70
- Clear sound
- Ultra-thin and lightweight
- Low power consumption for voltage type
₹6.00₹40.00inc.GSTPiezoelectric Sensor Buzzer Transducer/Disc 27mm Piezo sensor
₹6.00₹40.00inc.GST -
100 RPM Dual Shaft BO Motor
- Low density: lightweight, low inertia.
- Capability to absorb shock and vibration as a result of elastic compliance.
- Rated Speed(After Reduction): 100 RPM
- Rated Torque: 0.35 Kg cm
₹66.00₹100.00inc.GST100 RPM Dual Shaft BO Motor
₹66.00₹100.00inc.GST
-
Cable for Arduino Nano (USB 2.0 A to USB 2.0 Mini B) 30cm
- Up to 480 Mbps data transfer rate.
- USB Type: Type-A to Mini-B
- Weight: 15 gm
- Length: 30 cm
- Exclusively designed for Arduino boards
₹30.00₹120.00inc.GSTCable for Arduino Nano (USB 2.0 A to USB 2.0 Mini B) 30cm
₹30.00₹120.00inc.GST -
Arduino uno Cable
Use it to connect Arduino Uno, Arduino Mega 2560, Arduino 101 or any board with the USB female A port of your computer.
Cable color and shape may vary slightly from image as our stock rotates.
USB cable type: A/B Standard USB 2.0 cable.
₹33.00₹53.10inc.GSTArduino uno Cable
₹33.00₹53.10inc.GST -
₹33.00
₹150.00inc.GSTVoltage Detection Sensor Module 25V
₹33.00₹150.00inc.GST -
₹33.00
₹50.00inc.GSTCartoon Ultrasonic Sensor Mounting Bracket For HC-SR04
₹33.00₹50.00inc.GST -
CT Current Transformer 5A mini Sensor ZMCT103C DTCT103C (Color may vary)
- Rated input current: 5A
- Rated output current: 5 mA
- Ratio: 1000: 1
- Linear range: 0-10 A (100 Ohm)
- Linearity: 0.2%
- Insulation voltage: 3000 V
₹33.00₹70.00inc.GSTCT Current Transformer 5A mini Sensor ZMCT103C DTCT103C (Color may vary)
₹33.00₹70.00inc.GST -
-
L293D Motor Driver IC
Kit contains:l293d ic x 5
Wide supply-voltage range: 4.5 V to 36 v
Separate input-logic supply output current 1 a per channel (600 ma for l293d)
Peak output current 2 a per channel (1.2 A for 293d)₹35.00₹64.90inc.GSTL293D Motor Driver IC
₹35.00₹64.90inc.GST -
Center Shaft Gear Motor L Clamp -2pcs
- Material: Mild Steel
- Thickness: 2 mm
- Motor Mounting Hole: 13.5 mm
- Bracket Mounting Hole: 3 mm
- Weight: 26 gm (each
₹36.00₹50.00inc.GSTCenter Shaft Gear Motor L Clamp -2pcs
₹36.00₹50.00inc.GST -
Laser Module 650NM 5V
- Voltage: 3.0 V – 5 V.
- Driver: APC circuit.
- Line length: about 135 mm.
- Transmit power: 58mW.
- Operating Current: 40mA.
- Operating Current: 40mA.
- Operating temperature: -36â—¦C ~ 65â—¦C.
₹36.00₹108.00inc.GSTLaser Module 650NM 5V
₹36.00₹108.00inc.GST -
-
Digital LDR Module
- LM393 based design.
- Can detect ambient brightness and light intensity.
- Adjustable sensitivity (via blue digital potentiometer adjustment).
- Output Digital – 0V to 5V, Adjustable trigger level from preset.
- LEDs indicating output and power.
- Operating Voltage: 3.3V to 5V DC.
- Operating Current: 15ma.
₹37.00₹70.00inc.GSTDigital LDR Module
₹37.00₹70.00inc.GST -
Infrared ( IR sensor ) Module
Active High digital Output ( 5V)
3mm Mounting hole for easy mounting
Can be used for multitude of applications
Compatible with almost all microcontrollers with digital input
Two onboard LED’s
Calibration Pot
Great for DIY projects and Arduino beginners
Easy to use breadboard friendly form factor₹38.00₹47.00inc.GSTInfrared ( IR sensor ) Module
₹38.00₹47.00inc.GST -
65mm Robot Wheel ( tyre ) for BO Motors (Yellow)
- Tire with sponge liner for more strength
- New design wheel for better combination with the motor
- Diameter: 65 mm
- Width : 28 mm
- The material of Wheel: High-strength plastic
- The material of Tyre : Rubber
- Color: Yellow
₹40.00₹55.00inc.GST65mm Robot Wheel ( tyre ) for BO Motors (Yellow)
₹40.00₹55.00inc.GST -
HC49/U 16MHz Crystal Oscillator
- Frequency: 16 MHz
- Tolerance: 30%
- Operating Temperature Range: -10°C to +60°C
- Storage Temperature Range: -20°C to +70°C
₹40.00₹60.00inc.GSTHC49/U 16MHz Crystal Oscillator
₹40.00₹60.00inc.GST -
₹40.00
₹50.00inc.GST2.1×5.5mm DC Power Jack Socket Panel Mount (Female) -5 pieces
₹40.00₹50.00inc.GST