Best Seller Items
-
PAM8403 5V Two-channel Stereo Mini Class-D Audio Amplifier
- Dual channel stereo, high output power (3 w + 3 w power @ 5V and 4 ohms load)..
- Double panel wiring solves crosstalk.
- Super mini design allows it to be easily placed in a variety of digital products.
- 3W Output at 10% THD with a 4ΩLoad and 5V Power Supply.
- Filterless, Low Quiescent Current and Low EMI and Low Noise.
- Short Circuit Protection and Thermal Shutdown
₹28.00₹50.00inc.GSTPAM8403 5V Two-channel Stereo Mini Class-D Audio Amplifier
₹28.00₹50.00inc.GST -
ATMEGA328 OR ATMEGA8 Arduino breakout board PCB with components unsoldered (Colour may vary)
- High quality FR4 double side pcb.
- ATMEGA328 or ATMEGA8
₹77.00₹150.00inc.GST -
CT Current Transformer 5A mini Sensor ZMCT103C DTCT103C (Color may vary)
- Rated input current: 5A
- Rated output current: 5 mA
- Ratio: 1000: 1
- Linear range: 0-10 A (100 Ohm)
- Linearity: 0.2%
- Insulation voltage: 3000 V
₹33.00₹70.00inc.GSTCT Current Transformer 5A mini Sensor ZMCT103C DTCT103C (Color may vary)
₹33.00₹70.00inc.GST -
TPA3116D2 2.1 Channel Digital Subwoofer Amplifier Board DC, 12-24 V, 2 x 50 W + 100 W
- Applicable speaker impedance: 4-8 ohm.
- Adopts two high-quality TPA3116D2 digital amplifier chips.
- Powered by DC 12-24V, wide input voltage.
- Sound quality is very good, high efficiency and amplifying power.
- 50W x 2+100W Â 2.1 channels(left/right channel and subwoofer channel), high efficiency and low-heat.
- User can adjust the volume by themselves easily.
₹1225.00₹1899.00inc.GSTTPA3116D2 2.1 Channel Digital Subwoofer Amplifier Board DC, 12-24 V, 2 x 50 W + 100 W
₹1225.00₹1899.00inc.GST -
Piezoelectric Sensor Buzzer Transducer/Disc 27mm Piezo sensor
- Sound pressure level: 85DB 10cm
- The input voltage: 30vp-p max
- Operating Temperature: -20~70
- Clear sound
- Ultra-thin and lightweight
- Low power consumption for voltage type
₹6.00₹40.00inc.GSTPiezoelectric Sensor Buzzer Transducer/Disc 27mm Piezo sensor
₹6.00₹40.00inc.GST -
100 RPM Dual Shaft BO Motor
- Low density: lightweight, low inertia.
- Capability to absorb shock and vibration as a result of elastic compliance.
- Rated Speed(After Reduction): 100 RPM
- Rated Torque: 0.35 Kg cm
₹66.00₹100.00inc.GST100 RPM Dual Shaft BO Motor
₹66.00₹100.00inc.GST
-
LCD 16×2 display blue back light
 Pin No Function Name1Ground (0V)Ground2Supply voltage; 5V (4.7V – 5.3V) Vcc3Contrast adjustment; through a variable resistor VEE4Selects command register when low; and data register when highRegister Select5Low to write to the register; High to read from the registerRead/write6Sends data to data pins when a high to low pulse is givenEnable78-bit data pinsDB08DB19DB210DB311DB412DB513DB614DB715Backlight VCC (5V)Led16Backlight Ground (0V)Led-₹165.00₹255.00inc.GSTLCD 16×2 display blue back light
₹165.00₹255.00inc.GST -
CNC shield V3 for Engraving Machine 3D Printer
- Latest Arduino CNC Shield Version 3.10
- GRBL 0.9 compatible.Â
- Coolant enable.
- Jumpers to set the Micro-Stepping for the stepper drivers.
- Compact design.
- 4-Axis support (X, Y, Z, A-Can duplicate X, Y, Z or do a full 4th axis with custom firmware using pins D12 and D13)
- 2 x End stops for each axis (6 in total)
₹165.00₹250.00inc.GSTCNC shield V3 for Engraving Machine 3D Printer
₹165.00₹250.00inc.GST -
PIC16F616 DIP14
- Power Source: DC
- RoHS Compliant
- Material: Plastic
- Weight: 100
₹160.00 inc.GSTPIC16F616 DIP14
₹160.00 inc.GST -
CP2102 module USB to TTL serial UART
- Brand new and high quality.
- PCB Dimensions: 26.5mm * 15.6mm
- Weight: 4g
- using a new chip factory in 2013 CP2102
- with three LEDs: power indicator, data reception indicator, the data transmission indicator, working status
- with 3.3V and 5V dual power output
- pin leads to all sorts of useful
₹160.00₹250.00inc.GSTCP2102 module USB to TTL serial UART
₹160.00₹250.00inc.GST -
₹157.50
₹200.00inc.GSTMAX7219 Dot Led Matrix Module MCU Control LED Display Module
₹157.50₹200.00inc.GST -
LCD 16×2 display yellow back light
 Pin No Function Name1Ground (0V)Ground2Supply voltage; 5V (4.7V – 5.3V) Vcc3Contrast adjustment; through a variable resistor VEE4Selects command register when low; and data register when highRegister Select5Low to write to the register; High to read from the registerRead/write6Sends data to data pins when a high to low pulse is givenEnable78-bit data pinsDB08DB19DB210DB311DB412DB513DB614DB715Backlight VCC (5V)Led16Backlight Ground (0V)Led-₹155.00₹255.00inc.GSTLCD 16×2 display yellow back light
₹155.00₹255.00inc.GST -
₹149.00
₹200.00inc.GSTSolar panel 4V 100mA (60*60)
₹149.00₹200.00inc.GST -
mq4 gas sensor module/ High Sensitivity Gas Methane Detector Sensor
- Detecting range: 300~10000ppm
- Signal output indicator.
- Dual Signal output (analog output and TTL output).
- The TTL output signal is low level, allows us to connect with SCM directly.
- Analog output 0~5V voltage.
- Quick response and recovery.
₹147.00₹499.00inc.GSTmq4 gas sensor module/ High Sensitivity Gas Methane Detector Sensor
₹147.00₹499.00inc.GST -
mq9 Combustible Gas Sensor Module / Carbon Monoxide, Methane and LPG Gas Sensor
- Good sensitivity to CO/Combustible Gas
- High sensitivity to Methane, Propane, and CO
- Long life and low cost
- Simple drive circuit
- Input voltage: DC 5±0.2V
- Current Consumption: 150mA
₹147.00₹500.00inc.GSTmq9 Combustible Gas Sensor Module / Carbon Monoxide, Methane and LPG Gas Sensor
₹147.00₹500.00inc.GST -
MQ-135 Air Quality Sensor MQ-135 Gas Sensor Detection Module For Arduino M2
- Power:2.5V ~ 5.0V
- Detecting Range: 10ppm-300ppm NH3 ,10ppm-1000ppm Benzene,10ppm-300ppm Alcohol
- Relative humidity:<95%RH
- Dimension: 40.0mm * 21.0mm
₹147.00₹400.00inc.GSTMQ-135 Air Quality Sensor MQ-135 Gas Sensor Detection Module For Arduino M2
₹147.00₹400.00inc.GST -
hlm 18650 2000mAh BATTERY 3.7v Li-Ion Rechargeable Original ( Color may vary)
- Model NO.: 18650
- Lithium-Ion
- Nominal Voltage:Â 3.7V
- Charge Rate: 2C
- Rechargeable: Yes
- color may be different
₹145.00₹200.00inc.GSThlm 18650 2000mAh BATTERY 3.7v Li-Ion Rechargeable Original ( Color may vary)
₹145.00₹200.00inc.GST -
L298N 2A Based Motor Driver Module
- Current Sense for each motor.
- Heatsink for better performance.
- Power-On LED indicator.
- Double H bridge Drive Chip:Â L298N.
- Operating Voltage(VDC): 5~35
- Peak Current (A): 2
- Continuous Current (A): 0-36mA
- No. of Channels: 2
- Over-Current Protection (A): Yes
- Thermal Protection: Yes
₹143.00₹200.00inc.GSTL298N 2A Based Motor Driver Module
₹143.00₹200.00inc.GST -
MQ-7 Detector Module- Methane, Butane, LPG, Smoke Sensor CO Carbon Monoxide Coal Gas Sensor Module
- Operating voltage: DC 5 V.
- The analog output voltage, the higher the concentration the higher the voltage.
- The carbon monoxide detection with better sensitivity.
- With a long service life and reliable stability.
- Rapid response and recovery characteristics.
- Range: 10 to 1000 ppm.
₹142.00₹280.00inc.GST -
ATMEL Dip-8 ATTINY13-20PU ATTINY13A
- Power Source: DC
- RoHS Compliant
- Material: Plastic
- Weight: 150
₹140.00 inc.GSTATMEL Dip-8 ATTINY13-20PU ATTINY13A
₹140.00 inc.GST -
Alcohol Detector Gas Sensor Module MQ-3
- Power requirements: 5 VDC @ ~165 mA (heater on) / ~60 mA (heater off).
- Current Consumption: 150mA.
- DO output:Â 0.1 and 5V.
- AO output: 0.1- 0.3 V (relative to pollution), the maximum concentration of a voltage of about 4V
- Detecting Concentration: 0.05-10mg/L Alcohol.
₹139.00₹149.00inc.GSTAlcohol Detector Gas Sensor Module MQ-3
₹139.00₹149.00inc.GST -
₹137.50
₹200.00inc.GST1kg load cell sensor weighing
₹137.50₹200.00inc.GST