Best Seller Items
-
PAM8403 5V Two-channel Stereo Mini Class-D Audio Amplifier
- Dual channel stereo, high output power (3 w + 3 w power @ 5V and 4 ohms load)..
- Double panel wiring solves crosstalk.
- Super mini design allows it to be easily placed in a variety of digital products.
- 3W Output at 10% THD with a 4ΩLoad and 5V Power Supply.
- Filterless, Low Quiescent Current and Low EMI and Low Noise.
- Short Circuit Protection and Thermal Shutdown
₹28.00₹50.00inc.GSTPAM8403 5V Two-channel Stereo Mini Class-D Audio Amplifier
₹28.00₹50.00inc.GST -
ATMEGA328 OR ATMEGA8 Arduino breakout board PCB with components unsoldered (Colour may vary)
- High quality FR4 double side pcb.
- ATMEGA328 or ATMEGA8
₹77.00₹150.00inc.GST -
CT Current Transformer 5A mini Sensor ZMCT103C DTCT103C (Color may vary)
- Rated input current: 5A
- Rated output current: 5 mA
- Ratio: 1000: 1
- Linear range: 0-10 A (100 Ohm)
- Linearity: 0.2%
- Insulation voltage: 3000 V
₹33.00₹70.00inc.GSTCT Current Transformer 5A mini Sensor ZMCT103C DTCT103C (Color may vary)
₹33.00₹70.00inc.GST -
TPA3116D2 2.1 Channel Digital Subwoofer Amplifier Board DC, 12-24 V, 2 x 50 W + 100 W
- Applicable speaker impedance: 4-8 ohm.
- Adopts two high-quality TPA3116D2 digital amplifier chips.
- Powered by DC 12-24V, wide input voltage.
- Sound quality is very good, high efficiency and amplifying power.
- 50W x 2+100W Â 2.1 channels(left/right channel and subwoofer channel), high efficiency and low-heat.
- User can adjust the volume by themselves easily.
₹1225.00₹1899.00inc.GSTTPA3116D2 2.1 Channel Digital Subwoofer Amplifier Board DC, 12-24 V, 2 x 50 W + 100 W
₹1225.00₹1899.00inc.GST -
Piezoelectric Sensor Buzzer Transducer/Disc 27mm Piezo sensor
- Sound pressure level: 85DB 10cm
- The input voltage: 30vp-p max
- Operating Temperature: -20~70
- Clear sound
- Ultra-thin and lightweight
- Low power consumption for voltage type
₹6.00₹40.00inc.GSTPiezoelectric Sensor Buzzer Transducer/Disc 27mm Piezo sensor
₹6.00₹40.00inc.GST -
100 RPM Dual Shaft BO Motor
- Low density: lightweight, low inertia.
- Capability to absorb shock and vibration as a result of elastic compliance.
- Rated Speed(After Reduction): 100 RPM
- Rated Torque: 0.35 Kg cm
₹66.00₹100.00inc.GST100 RPM Dual Shaft BO Motor
₹66.00₹100.00inc.GST
-
74HC164N DIP 14 Shift Register
- Typical operating frequency: 50 MHz
- Typical propagation delay: 19 ns (clock to Q)
- Wide operating supply voltage range: 2V to 6V
- Low input current: 1 µA maximum
- Low quiescent supply current: 80 µA maximum (74HC Series)
- Fanout of 10 LS-TTL loads
₹16.80₹32.00inc.GST74HC164N DIP 14 Shift Register
₹16.80₹32.00inc.GST -
ATTINY85-20PU
- High Performance, Low Power AVR 8-Bit Microcontroller
- Non-volatile Program and Data Memories
- Special Microcontroller Features
- No. of Pins – 8PinsCPU Speed – 20MHz
₹200.00 inc.GSTATTINY85-20PU
₹200.00 inc.GST -
PIC16F616 DIP14
- Power Source: DC
- RoHS Compliant
- Material: Plastic
- Weight: 100
₹160.00 inc.GSTPIC16F616 DIP14
₹160.00 inc.GST -
BD140 PNP Transistor
- Transistor Type : PNP transistor
- Max Collector Current : -1.5A
- Max Collector-Emitter Voltage : –80V
- Max Collector-Base Voltage : –80VMax Emitter-Base Voltage : –5V
₹5.25₹8.00inc.GSTBD140 PNP Transistor
₹5.25₹8.00inc.GST -
AT89S51 DIP-40 8051 89S51
- Power Source: DC
- RoHS Compliant
- Material: Silicone
- Weight: 0.007
₹85.00₹100.00inc.GSTAT89S51 DIP-40 8051 89S51
₹85.00₹100.00inc.GST -
ATMEL Dip-8 ATTINY13-20PU ATTINY13A
- Power Source: DC
- RoHS Compliant
- Material: Plastic
- Weight: 150
₹140.00 inc.GSTATMEL Dip-8 ATTINY13-20PU ATTINY13A
₹140.00 inc.GST -
0.96 INCH 4PIN WHITE OLED Display Module
- Driver IC: SSD1306
- Resolution: 128 x 64
- Visual Angle: >160°
- Input Voltage: 3.3V ~ 6V
- Only Need 2 I/O Port Control
₹275.00₹400.00inc.GST0.96 INCH 4PIN WHITE OLED Display Module
₹275.00₹400.00inc.GST -
Arduino Nano V3.0 ATmega328P Controller Board unsoldered
Microcontroller Atmel ATmega328
Operating Voltage (logic level): 5V
Input Voltage (recommended): 7V ~ 12V
Input Voltage (limits): 6V ~ 20 V
Digital I/O Pins: 14 (of which 6 provide PWM output)
Analog Input Pins: 8
DC Current per I/O Pin: 40mA
Flash Memory: 32KB (ATmega328) (of which 2 KB used by bootloader)
SRAM: 2KB (ATmega328)
EEPROM: 1KB (ATmega328)
Clock Speed: 16MHz₹350.00₹656.00inc.GSTArduino Nano V3.0 ATmega328P Controller Board unsoldered
₹350.00₹656.00inc.GST -
TowardPro MG996R Digital High Torque Servo Motor
- Weight: 56g
- Dimension: 40×19.7×41mm
- Stall torque: 9.4kg/cm (4.8v); 11kg/cm (6.0v)
- Operating speed: 0.19sec/60degree (4.8v); 0.15sec/60degree (6.0v)
- Operating voltage: 4.8 ~ 6.6V
- Gear Type: Metal gear
- Wire length: 32cm
₹363.00₹450.00inc.GSTTowardPro MG996R Digital High Torque Servo Motor
₹363.00₹450.00inc.GST -
BO Motor Straight Mono Shaft 3-6V
- Low density: lightweight, low inertia.
- Capability to absorb shock and vibration as a result of elastic compliance.
- Ability to operate with minimum or no lubrication, due to inherent lubricity.
- The relatively low coefficient of friction.
- Operating Voltage(VDC): 3~6
- Shaft Length (mm): 8.5
- Shaft Diameter (mm): 5.5
₹55.00₹100.00inc.GST 45% offBO Motor Straight Mono Shaft 3-6V
₹55.00₹100.00inc.GST 45% off -
4000W 220V DIMMER Voltage Regulators SCR Speed Controller
- 4 Terminals,220V into 0-220V adjustable output,Be sure to take the load transfer
- Mainly used:Thermostat,Dimming,Governor(Heating pipe, Heating wire ,Heating plate,Heating rods,Baisi bulb,Fan,EAF,Solder furnace,Table lamp) and so on
- Voltage: AC 220V Maximum power: 4000W Voltage Regulator: AC 0-220V
₹378.00₹540.00inc.GST4000W 220V DIMMER Voltage Regulators SCR Speed Controller
₹378.00₹540.00inc.GST -
ESP-WROOM-32 ESP32 Development Board 38pin
1. 2.4GHz Dual-Mode WiFi + Bluetooth Development Board, 38PIN
2. Ultra-Low power consumption works perfectly with the IDE
3. Support LWIP protocol, Freertos
4. Support Three Modes: AP, STA, and AP+STA
5. ESP 32 is safe, reliable, and scalable to a variety of applications₹503.00₹750.00inc.GSTESP-WROOM-32 ESP32 Development Board 38pin
₹503.00₹750.00inc.GST -
Bluetooth Audio Reciever Module 3v-5v
- Bluetooth 3.0 with audio signal decoding feature.
- The output is directly compatible with the amplifier.
- Very little weight and small size form factor make it easily fits into any application area.
- Can be used to Design your own wireless music system
- Low power consumption.
- 3v-5v voltage supply.
₹58.00₹90.00inc.GSTBluetooth Audio Reciever Module 3v-5v
₹58.00₹90.00inc.GST -
USB TO UART TTL 5V 3.3V FT232RL Download Cable To Serial Adapter Module For Arduino
- Standard interface layout, compatible with a variety of Arduinos such as the Pro Mini
- Original FTDI FT232 chip, stable performance
- USB power has current protection, using 500MA self-restore fuse
- RXD/TXD transceiver communication indicator
- With power, sending, receiving indicator, working status LED indicators
- Mini USB Port Connection
- Support 3.3V, 5V
₹170.00₹200.00inc.GSTUSB TO UART TTL 5V 3.3V FT232RL Download Cable To Serial Adapter Module For Arduino
₹170.00₹200.00inc.GST -
PAM8403 With Potentiometer
- Operating voltage: 2.5V-5.5V
- Maximum output power: 3W x 2
- PCB size is about: length 30mm width 22mm overall height after installed is about 16mm
- Built with switch Potentiometer, can adjust the volume & control power switch freely!
- Flexible assembly usage
₹62.70₹100.00inc.GSTPAM8403 With Potentiometer
₹62.70₹100.00inc.GST -
2Wd Smart Robot Bot with Chassis, Bo Motor, Wheels, Clamps, Battery Box, Switch – robotic kit diy
- Very handy and simple in assembling/disassembling.
- Strong components so as to withstand extreme terrain conditions.
- Transparent Car Chassis.
- Attractive design.
- This car is the tachometer encoder.
- Can use with other devices to realize function of tracing, obstacle avoidance, distance testing, speed testing,
- Size: 21 x 15 cm (L x W).
- Wheel size: 6.5 x 2.7cm (Dia. x H).
₹372.00₹750.00inc.GST