Best Seller Items
-
PAM8403 5V Two-channel Stereo Mini Class-D Audio Amplifier
- Dual channel stereo, high output power (3 w + 3 w power @ 5V and 4 ohms load)..
- Double panel wiring solves crosstalk.
- Super mini design allows it to be easily placed in a variety of digital products.
- 3W Output at 10% THD with a 4ΩLoad and 5V Power Supply.
- Filterless, Low Quiescent Current and Low EMI and Low Noise.
- Short Circuit Protection and Thermal Shutdown
₹28.00₹50.00inc.GSTPAM8403 5V Two-channel Stereo Mini Class-D Audio Amplifier
₹28.00₹50.00inc.GST -
ATMEGA328 OR ATMEGA8 Arduino breakout board PCB with components unsoldered (Colour may vary)
- High quality FR4 double side pcb.
- ATMEGA328 or ATMEGA8
₹77.00₹150.00inc.GST -
CT Current Transformer 5A mini Sensor ZMCT103C DTCT103C (Color may vary)
- Rated input current: 5A
- Rated output current: 5 mA
- Ratio: 1000: 1
- Linear range: 0-10 A (100 Ohm)
- Linearity: 0.2%
- Insulation voltage: 3000 V
₹33.00₹70.00inc.GSTCT Current Transformer 5A mini Sensor ZMCT103C DTCT103C (Color may vary)
₹33.00₹70.00inc.GST -
TPA3116D2 2.1 Channel Digital Subwoofer Amplifier Board DC, 12-24 V, 2 x 50 W + 100 W
- Applicable speaker impedance: 4-8 ohm.
- Adopts two high-quality TPA3116D2 digital amplifier chips.
- Powered by DC 12-24V, wide input voltage.
- Sound quality is very good, high efficiency and amplifying power.
- 50W x 2+100W Â 2.1 channels(left/right channel and subwoofer channel), high efficiency and low-heat.
- User can adjust the volume by themselves easily.
₹1225.00₹1899.00inc.GSTTPA3116D2 2.1 Channel Digital Subwoofer Amplifier Board DC, 12-24 V, 2 x 50 W + 100 W
₹1225.00₹1899.00inc.GST -
Piezoelectric Sensor Buzzer Transducer/Disc 27mm Piezo sensor
- Sound pressure level: 85DB 10cm
- The input voltage: 30vp-p max
- Operating Temperature: -20~70
- Clear sound
- Ultra-thin and lightweight
- Low power consumption for voltage type
₹6.00₹40.00inc.GSTPiezoelectric Sensor Buzzer Transducer/Disc 27mm Piezo sensor
₹6.00₹40.00inc.GST -
100 RPM Dual Shaft BO Motor
- Low density: lightweight, low inertia.
- Capability to absorb shock and vibration as a result of elastic compliance.
- Rated Speed(After Reduction): 100 RPM
- Rated Torque: 0.35 Kg cm
₹66.00₹100.00inc.GST100 RPM Dual Shaft BO Motor
₹66.00₹100.00inc.GST
-
Speaker 2W 8 OHM High Quality 3x3X1.5cm Loudspeaker
- Maximum output power – 2 Watts
- SIZE 32x32x17mm
- Impedance: 8 OHM
- FREQUENCY RESPONSE:150Hz-20KHz
- Smaller with Higher Power and High Sensitivity
- Â Application for Laptop PC, AIO computer, GPS, Telecom, White Goods and Medical Device
₹100.00 inc.GSTSpeaker 2W 8 OHM High Quality 3x3X1.5cm Loudspeaker
₹100.00 inc.GST -
A4988 driver Stepper Motor Driver
- Supply Voltage : 8-35 VDC.
- Current : 1.0A Â (no heatsink ).
- Current : 2.0A (with heat-sinking).
- logic input : 3 – 5.5V .
- Automatic current decay mode detection / choice.
- Mixed with slow current decay mode.
₹100.00₹150.00inc.GSTA4988 driver Stepper Motor Driver
₹100.00₹150.00inc.GST -
5V 10A 2 Channel Relay Module (colour may vary)
Size: 50. 6mm (l) x 38. 8mm (w) x 19. 3mm (h)
Weight: 30g
PCB color black
Around the board with 4 mounting holes, hole diameter 3. 1 mm, easy installation and fixing
Relay high quality single relay single pole double throw
A common end, a beginning, a closed-end, optical coupling isolation, good anti-interference
Low suction, high level release₹100.00₹150.00inc.GST5V 10A 2 Channel Relay Module (colour may vary)
₹100.00₹150.00inc.GST -
AC-DC Buck Converter step down Transformer power supply module SMPS
- AC-DC 5V 700mA 3.5W
- Precision Buck Converter
- AC 220v to 5v DC step down Transformer power supply module
₹99.00₹200.00inc.GSTAC-DC Buck Converter step down Transformer power supply module SMPS
₹99.00₹200.00inc.GST -
Water Proof Liquid Temperature Sensor – DS18B20
3.0V to 5.5V input.
Temperature range: -55 to 125°C (-67°F to 257°F).
±0.5°C Accuracy from -10°C to 85°C.
Red wire – VCC.
Black wire – GND.
Yellow wire – DATA.
Stainless steel tube 6mm diameter by 30mm long.
Cable length: 90cm.
₹99.00₹195.00inc.GSTWater Proof Liquid Temperature Sensor – DS18B20
₹99.00₹195.00inc.GST -
USB to TTL converter UART module CH340G CH340 3.3V 5V switch
- Built-in USB to TTL Transfer chip.
- Designed to be used for USB to TTL electronic projects.
- TTL interface output, easy to connect to your MCU.
- Dual 3.3V and 5V Power output, work with 3.3v and 5 V target device.
- The mini-module is designed specifically for STC download and ARDUINO PRO supports all series of STC
₹95.00₹110.00inc.GSTUSB to TTL converter UART module CH340G CH340 3.3V 5V switch
₹95.00₹110.00inc.GST -
Water Pump Micro DC 3-6V
Operating Voltage : 2.5 ~ 6V
Operating Current : 130 ~ 220mA
Flow Rate : 80 ~ 120 L/H
Maximum Lift : 40 ~ 110 mm
Continuous Working Life : 500 hours
Driving Mode : DC, Magnetic Driving
Material : Engineering Plastic
Outlet Outside Diameter : 7.5 mm
Outlet Inside Diameter : 5 mm
₹95.00₹190.00inc.GSTWater Pump Micro DC 3-6V
₹95.00₹190.00inc.GST -
Current Transformer 20A CT AC CURRENT SENSOR
- Winding Ratio 1:1200
- Frequency : 50 Hz
- Recommended Burden Resistance (Ru) : 120 Ohms @ V out = 0.5 Volts.
- Maximum Primary Current (Imax) : 20 Amp.
- AC CURRENT MEASUREMENTS ONLY
- CAN NOT USE IN DC
₹94.00₹100.00inc.GSTCurrent Transformer 20A CT AC CURRENT SENSOR
₹94.00₹100.00inc.GST -
RF Transmitter and Receiver kit
Receiver sensitivity: -105DB
Receiving frequency: 433.92MHZ
Transfer rate: 4KB / S
Range 10 meter with wire antena
Transmitting power: 10mW₹92.04₹108.61inc.GSTRF Transmitter and Receiver kit
₹92.04₹108.61inc.GST -
NRF24L01 2.4GHz Antenna Wireless Transceiver Module
- Maximum operating speeds up to 2Mbps, GFSK modulation efficiency, Anti-interference ability,
- Particularly suitable for industrial control applications.
- Built-in hardware CRC error detection, Multipoint communication address control.
- Low-power 1.9 ~ 3.6V, only 1uA on Power down mode
- Built-in 2.4Ghz antenna
- Built-in voltage regulator
- Standard DIP Pitch Interface for embedded applications
₹91.00₹250.00inc.GSTNRF24L01 2.4GHz Antenna Wireless Transceiver Module
₹91.00₹250.00inc.GST -
₹90.00
₹100.00inc.GST8×8 Red 64 LED Dot Matrix Display
₹90.00₹100.00inc.GST -
Motor Driver Module
CAN CONTROL DC GEARED MOTOR
CAN BE EASILY INTERFACED WITH MICRO-CONTROLLER USING HEADER PINS
COMPATIBLE WITH ARDUINO, RASPBERRY PI, ARM, AVR, PIC, 8051, etc – Can provide bidirectional drive currents of up to 600-mA at voltages from 4.5 V to 36 V.
With Terminal Blocks for connecting motors & power supply and Berg Sticks for control signals from microcontroller
Can control 2 DC Motors, their direction using control lines and their speed using PWM.₹90.00₹123.90inc.GSTMotor Driver Module
₹90.00₹123.90inc.GST -
Ultrasonic Sensor HC-SR04
Power Supply : 5V DC
Quiescent Current : <2mA
Working Current: 15mA
Effectual Angle: <15°
Ranging Distance : 2cm – 400 cm/1″ – 13ft
Resolution : 0.3 cm
Measuring Angle: 30 degree
Trigger Input Pulse width: 10uS
Dimension: 45mm x 20mm x 15mm
₹89.00₹145.00inc.GSTUltrasonic Sensor HC-SR04
₹89.00₹145.00inc.GST -
₹88.00
₹150.00inc.GSTRTC module clock DS1307 WITH Battery
₹88.00₹150.00inc.GST -
Stepper motor 5V uni polar 28BYJ-48
- High quality stepper motor
- Voltage: DC 5V
- Diameter: 25mm
- Step Angle: 5.625 x 1/64
- Reduction Ratio: 1/64
- Rated voltage ： 5VDC
- Frequency : 100Hz
- DC resistance ： 50Ω±7%(25℃)
- Idle In-traction Frequency : > 600Hz
₹87.00₹100.00inc.GSTStepper motor 5V uni polar 28BYJ-48
₹87.00₹100.00inc.GST