-
Infrared ( IR sensor ) Module
Active High digital Output ( 5V)
3mm Mounting hole for easy mounting
Can be used for multitude of applications
Compatible with almost all microcontrollers with digital input
Two onboard LED’s
Calibration Pot
Great for DIY projects and Arduino beginners
Easy to use breadboard friendly form factor₹38.00₹47.00inc.GSTInfrared ( IR sensor ) Module
₹38.00₹47.00inc.GST -
₹65.00
₹80.00inc.GSTRCWL-0516 Microwave Radar Sensor
₹65.00₹80.00inc.GST -
Current Transformer 20A CT AC CURRENT SENSOR
- Winding Ratio 1:1200
- Frequency : 50 Hz
- Recommended Burden Resistance (Ru) : 120 Ohms @ V out = 0.5 Volts.
- Maximum Primary Current (Imax) : 20 Amp.
- AC CURRENT MEASUREMENTS ONLY
- CAN NOT USE IN DC
₹94.00₹100.00inc.GSTCurrent Transformer 20A CT AC CURRENT SENSOR
₹94.00₹100.00inc.GST -
Piezoelectric Sensor Buzzer Transducer/Disc 27mm Piezo sensor
- Sound pressure level: 85DB 10cm
- The input voltage: 30vp-p max
- Operating Temperature: -20~70
- Clear sound
- Ultra-thin and lightweight
- Low power consumption for voltage type
₹6.00₹40.00inc.GSTPiezoelectric Sensor Buzzer Transducer/Disc 27mm Piezo sensor
₹6.00₹40.00inc.GST -
₹137.50
₹200.00inc.GST1kg load cell sensor weighing
₹137.50₹200.00inc.GST -
-
₹75.00
₹99.00inc.GST5A Current Transformer sensor AC
₹75.00₹99.00inc.GST -
CT Current Transformer 5A mini Sensor ZMCT103C DTCT103C (Color may vary)
- Rated input current: 5A
- Rated output current: 5 mA
- Ratio: 1000: 1
- Linear range: 0-10 A (100 Ohm)
- Linearity: 0.2%
- Insulation voltage: 3000 V
₹33.00₹70.00inc.GSTCT Current Transformer 5A mini Sensor ZMCT103C DTCT103C (Color may vary)
₹33.00₹70.00inc.GST -
Rotary Encoder Sensor Module
- Model : KY-040.
- Type : Incremental Encoder.
- Cycles per revolution (CPR) : 20.
- Working voltage : 0 – 5V.
- Material : PCB + Brass.
- Mounting Nut Thread diameter: 6.6mm
- Weight : 10 gm
₹57.75₹75.00inc.GSTRotary Encoder Sensor Module
₹57.75₹75.00inc.GST -
RFID Tag -13.5KHz
- Contactless transmission of data and supply energy (no battery needed)
- Operating distance: Up to 100mm (depending on antenna geometry)
- Operating frequency: 13.56KHz
- Data transfer: 106 kbit/s
- Data integrity: 16 Bit CRC, parity, bit coding bit counting
- Anticollision
- Typical ticketing transaction: <100 ms ( including backup management)
₹15.75₹49.00inc.GSTRFID Tag -13.5KHz
₹15.75₹49.00inc.GST -
Heart Rate Monitor Kit with AD8232 ECG sensor module
- Designed to extract, amplify, and filter small biopotential signals.
- Leads-Off Detection.
- Shutdown Pin.
- LED Indicator.
- Analog Output.
- 3.5 mm Jack for Biomedical Pad Connection.
₹643.00₹700.00inc.GSTHeart Rate Monitor Kit with AD8232 ECG sensor module
₹643.00₹700.00inc.GST -
Pulse Heart Beat Sensor
- A Color-Coded Cable, with a standard male header connectors. Plug it straight into an Arduino or a Breadboard. No soldering is required.
- The Pulse Sensor has 3 holes around the outside edge which make it easy to sew it into almost anything.
- Visualization software (made in Processing) to instantly see the output of the sensor and for troubleshooting.
₹181.50₹200.00inc.GSTPulse Heart Beat Sensor
₹181.50₹200.00inc.GST -
1/2” Water Flow Sensor 1-30L/min Hall Flowmeter Temperature sensor
- Mainly used for water testing, water cooling system
- Application: Water heaters, credit card machines, water vending machine, flow measurement device
- High amplitude: ≥ 4.6V
- Low amplitude: ≤ 0.5V
- Electric strength: 1250V/min
- Insulation resistance: ≥ 100MΩ
- Hydrostatic pressure testing: ≤ 2.0Mpa
₹295.00₹350.00inc.GST1/2” Water Flow Sensor 1-30L/min Hall Flowmeter Temperature sensor
₹295.00₹350.00inc.GST -
₹132.00
₹150.00inc.GSTDHT11 Temperature And Humidity Sensor Module with wire
₹132.00₹150.00inc.GST -
₹30.00
₹50.00inc.GSTDigital Sensor TTP223B Module Capacitive Touch Sensor
₹30.00₹50.00inc.GST -
₹352.00
₹450.00inc.GST 22% off2.2 Inch Bend Sensor for Hand Gesture Recognition
₹352.00₹450.00inc.GST 22% off
