-
Heart Rate Monitor Kit with AD8232 ECG sensor module
- Designed to extract, amplify, and filter small biopotential signals.
- Leads-Off Detection.
- Shutdown Pin.
- LED Indicator.
- Analog Output.
- 3.5 mm Jack for Biomedical Pad Connection.
₹643.00₹700.00inc.GSTHeart Rate Monitor Kit with AD8232 ECG sensor module
₹643.00₹700.00inc.GST -
-
₹352.00
₹450.00inc.GST 22% off2.2 Inch Bend Sensor for Hand Gesture Recognition
₹352.00₹450.00inc.GST 22% off -
Thermo Couple
Range : up to 1000 deg. C
Service condition : Immersed in sodium/air upto 500 deg. C
Conductor material : Nickel chromium/ Nickel aluminium
Type of Hot junction : Insulated
Sensitivity : 41 micro volts / deg. C
The accuracy of the measured value shall be better than or equal to
- a) ± 1.0 deg C for values upto 350oC
- b) ± 0.4 % for values beyond 350oC
Sheath material : AISI 316L
Insulation : Magnesium oxide
Length of the thermocouple :As per table 1.
Termination for cold end :The thermocouple shall be supplied with ready mounted plug type connector. The specification of the connector is as per clause 3.0
₹333.94₹359.90inc.GSTThermo Couple
₹333.94₹359.90inc.GST -
DHT22 Digital Temperature and Humidity Sensor Module AM2302
- Measuring range: temperature -40-80 ℃; humidity 0; 99.9%RH
- Measurement accuracy (25℃): temperature: + 0.5; humidity: + 2%RH (10; 90%RH)
- Resolution: temperature: 0.1 ℃, humidity: 0.1%RH
- Attenuation value: temperature: <1℃ / year; humidity: < 1%RH/ years
- High precision
- Capacitive type
- Full range temperature compensated
- Relative humidity and temperature measurement
- Calibrated digital signal
- Outstanding long-term stability
₹329.00₹500.00inc.GSTDHT22 Digital Temperature and Humidity Sensor Module AM2302
₹329.00₹500.00inc.GST -
GPS module (NEO-6M GPS )
Interface: UART interface, with logical level converter, 3.3V-5V interface compatible
SunRobotics ublox neo-6m gps module (3.3V-5V interface with eeprom and flash)
Board size: 23mm*40mm
Antenna: High gain active anttenna and good performance. 25mm*25mm₹300.00₹700.00inc.GSTGPS module (NEO-6M GPS )
₹300.00₹700.00inc.GST -
1/2” Water Flow Sensor 1-30L/min Hall Flowmeter Temperature sensor
- Mainly used for water testing, water cooling system
- Application: Water heaters, credit card machines, water vending machine, flow measurement device
- High amplitude: ≥ 4.6V
- Low amplitude: ≤ 0.5V
- Electric strength: 1250V/min
- Insulation resistance: ≥ 100MΩ
- Hydrostatic pressure testing: ≤ 2.0Mpa
₹295.00₹350.00inc.GST1/2” Water Flow Sensor 1-30L/min Hall Flowmeter Temperature sensor
₹295.00₹350.00inc.GST -
Bluetooth module HC-05
- Bluetooth protocal: Bluetooth Specification v2.0 EDR.
- Frequency: 2.4GHz ISM band.
- Modulation: GFSK(Gaussian Frequency Shift Keying)
- Emission power: ≤4dBm, Class 2.
- Sensitivity: ≤-84dBm at 0.1% BER.
- Speed: Asynchronous: 2.1Mbps(Max) / 160 kbps, Synchronous: 1Mbps/1Mbps.
₹278.00₹336.30inc.GSTBluetooth module HC-05
₹278.00₹336.30inc.GST -
₹189.75
₹250.00inc.GSTMPU-6050 3-Axis Accelerometer and Gyroscope Sensor
₹189.75₹250.00inc.GST -
Pulse Heart Beat Sensor
- A Color-Coded Cable, with a standard male header connectors. Plug it straight into an Arduino or a Breadboard. No soldering is required.
- The Pulse Sensor has 3 holes around the outside edge which make it easy to sew it into almost anything.
- Visualization software (made in Processing) to instantly see the output of the sensor and for troubleshooting.
₹181.50₹200.00inc.GSTPulse Heart Beat Sensor
₹181.50₹200.00inc.GST -
Current Sensor ACS712 30A
5V power supply
On-board power indicator
Bidirectional current measurement up to 30A
Analog output with a sensitivity of 66 mV / A
₹170.00₹220.00inc.GSTCurrent Sensor ACS712 30A
₹170.00₹220.00inc.GST -
mq4 gas sensor module/ High Sensitivity Gas Methane Detector Sensor
- Detecting range: 300~10000ppm
- Signal output indicator.
- Dual Signal output (analog output and TTL output).
- The TTL output signal is low level, allows us to connect with SCM directly.
- Analog output 0~5V voltage.
- Quick response and recovery.
₹147.00₹499.00inc.GSTmq4 gas sensor module/ High Sensitivity Gas Methane Detector Sensor
₹147.00₹499.00inc.GST -
mq9 Combustible Gas Sensor Module / Carbon Monoxide, Methane and LPG Gas Sensor
- Good sensitivity to CO/Combustible Gas
- High sensitivity to Methane, Propane, and CO
- Long life and low cost
- Simple drive circuit
- Input voltage: DC 5±0.2V
- Current Consumption: 150mA
₹147.00₹500.00inc.GSTmq9 Combustible Gas Sensor Module / Carbon Monoxide, Methane and LPG Gas Sensor
₹147.00₹500.00inc.GST -
MQ-135 Air Quality Sensor MQ-135 Gas Sensor Detection Module For Arduino M2
- Power:2.5V ~ 5.0V
- Detecting Range: 10ppm-300ppm NH3 ,10ppm-1000ppm Benzene,10ppm-300ppm Alcohol
- Relative humidity:<95%RH
- Dimension: 40.0mm * 21.0mm
₹147.00₹400.00inc.GSTMQ-135 Air Quality Sensor MQ-135 Gas Sensor Detection Module For Arduino M2
₹147.00₹400.00inc.GST -
MQ-7 Detector Module- Methane, Butane, LPG, Smoke Sensor CO Carbon Monoxide Coal Gas Sensor Module
- Operating voltage: DC 5 V.
- The analog output voltage, the higher the concentration the higher the voltage.
- The carbon monoxide detection with better sensitivity.
- With a long service life and reliable stability.
- Rapid response and recovery characteristics.
- Range: 10 to 1000 ppm.
₹142.00₹280.00inc.GST -
₹137.50
₹200.00inc.GST1kg load cell sensor weighing
₹137.50₹200.00inc.GST
