Best Seller Items
-
PAM8403 5V Two-channel Stereo Mini Class-D Audio Amplifier
- Dual channel stereo, high output power (3 w + 3 w power @ 5V and 4 ohms load)..
- Double panel wiring solves crosstalk.
- Super mini design allows it to be easily placed in a variety of digital products.
- 3W Output at 10% THD with a 4ΩLoad and 5V Power Supply.
- Filterless, Low Quiescent Current and Low EMI and Low Noise.
- Short Circuit Protection and Thermal Shutdown
₹28.00₹50.00inc.GSTPAM8403 5V Two-channel Stereo Mini Class-D Audio Amplifier
₹28.00₹50.00inc.GST -
ATMEGA328 OR ATMEGA8 Arduino breakout board PCB with components unsoldered (Colour may vary)
- High quality FR4 double side pcb.
- ATMEGA328 or ATMEGA8
₹77.00₹150.00inc.GST -
CT Current Transformer 5A mini Sensor ZMCT103C DTCT103C (Color may vary)
- Rated input current: 5A
- Rated output current: 5 mA
- Ratio: 1000: 1
- Linear range: 0-10 A (100 Ohm)
- Linearity: 0.2%
- Insulation voltage: 3000 V
₹33.00₹70.00inc.GSTCT Current Transformer 5A mini Sensor ZMCT103C DTCT103C (Color may vary)
₹33.00₹70.00inc.GST -
TPA3116D2 2.1 Channel Digital Subwoofer Amplifier Board DC, 12-24 V, 2 x 50 W + 100 W
- Applicable speaker impedance: 4-8 ohm.
- Adopts two high-quality TPA3116D2 digital amplifier chips.
- Powered by DC 12-24V, wide input voltage.
- Sound quality is very good, high efficiency and amplifying power.
- 50W x 2+100W Â 2.1 channels(left/right channel and subwoofer channel), high efficiency and low-heat.
- User can adjust the volume by themselves easily.
₹1225.00₹1899.00inc.GSTTPA3116D2 2.1 Channel Digital Subwoofer Amplifier Board DC, 12-24 V, 2 x 50 W + 100 W
₹1225.00₹1899.00inc.GST -
Piezoelectric Sensor Buzzer Transducer/Disc 27mm Piezo sensor
- Sound pressure level: 85DB 10cm
- The input voltage: 30vp-p max
- Operating Temperature: -20~70
- Clear sound
- Ultra-thin and lightweight
- Low power consumption for voltage type
₹6.00₹40.00inc.GSTPiezoelectric Sensor Buzzer Transducer/Disc 27mm Piezo sensor
₹6.00₹40.00inc.GST -
100 RPM Dual Shaft BO Motor
- Low density: lightweight, low inertia.
- Capability to absorb shock and vibration as a result of elastic compliance.
- Rated Speed(After Reduction): 100 RPM
- Rated Torque: 0.35 Kg cm
₹66.00₹100.00inc.GST100 RPM Dual Shaft BO Motor
₹66.00₹100.00inc.GST
-
Nodemcu Wifi Development Board Esp32 30pin
- Built-in Flash: 32Mbit
- Power supply: 5V
- WiFi protocol: IEEE 802.11 b/g/n
- Peripheral interface: UART/GPIO/ADC/DAC/SDIO/PWM/I2C/I2S
- Logic level: 3.3V
₹480.00₹565.00inc.GSTNodemcu Wifi Development Board Esp32 30pin
₹480.00₹565.00inc.GST -
12V DC 1/2″ Electric Solenoid Water Air Valve Switch (Normally Closed)
- Rated Operating Voltage: 12V DC.
- Rated Current: 0.6A.
- Operation Mode: NC (Normally Closed).
- Pressure: 0.02 – 0.8MPa.
- Max fluid temperature: 100°C.
₹472.00₹500.00inc.GST12V DC 1/2″ Electric Solenoid Water Air Valve Switch (Normally Closed)
₹472.00₹500.00inc.GST -
TPA3116D2 TPA3116 DC12-26V 100W Mono Digital Power Amplifier Digital Audio Amplifier
Chip type:Â TPA3116D2
Input voltage: DC12-26V
Output power: 100W
SNR: 100dB
Channel:Â Mono
Size: 79*54*16mm₹462.00₹530.00inc.GSTTPA3116D2 TPA3116 DC12-26V 100W Mono Digital Power Amplifier Digital Audio Amplifier
₹462.00₹530.00inc.GST -
A2212 10T 1400KV Brushless Motor for Drone (Soldered Connector)
- Model: A2212/10T
- Motor KV: 1400
- Max. Efficiency Current: 6-12A
- No Load Current: 0.7A @10V
- Current Capacity: 16A/60S
₹420.00₹600.00inc.GSTA2212 10T 1400KV Brushless Motor for Drone (Soldered Connector)
₹420.00₹600.00inc.GST -
STM 32F103C8T6 ARM STM32 Development Board Module unsoldered
1, stm32F103C8T6Package Type: LQFP;Number of pins: 48;Kernel: Cortex-M3;Operating frequency: 72MHz;Storage resources: 64K Byte Flash, 20KByte SRAM;Interface Resources: 2x SPI, 3x USART, 2x I2C, 1x CAN, 37x I / O ports,Analog-to-digital conversion: 2x ADC (12-bit / 16-channel)Timers: 3 general timers and 1 advanced timerDebug Download: Support JTAG / SWD debug interface to download, support for IAP.2, RT9193: 3.3V regulator chip, the maximum output of 300mA.1, SWD interface: support for simulation, download and debug.2, Mirco USB interface: power supply and USB communication, does not support the download.3, USART1 interface: USART1 can be used to download the program, or use the USART1 for communication.4, MCU pin interface: leads all I / O port pins, easy to connect with peripherals.5, 5V and 3.3V power input and output interface: commonly used in external power supply, or with other modules for common ground treatment₹414.00₹600.00inc.GSTSTM 32F103C8T6 ARM STM32 Development Board Module unsoldered
₹414.00₹600.00inc.GST -
-
ARDUINO UNO R3 (ch340) Micro Controller Board with Cable compatible (Make in india)
Model Type UNO Rev R3 Microcontroller Chip ATmega328 Operating Voltage (VDC) 5 Input Voltage(Recommended) 7-12V Input Voltage (limit) 6-20V Analog I/O Pins 6 Digital I/O Pins 14 (of which 6 provide PWM output) PWM Digital I/O Pins 6 DC Current per I/O Pin (mA) 40 DC Current for 3.3V Pin (mA) 50 Clock Speed 16 MHz SRAM (KB) 2 EEPROM 1 KB (ATmega328) Flash Memory 32 KB On Board LEDs On/Off, L (PIN 13), TX, RX Dimensions in mm (LxWxH) 75 x 54 x 12 Weight (gm) 28 (without cable) 54 (with cable) ₹400.00₹900.00inc.GSTARDUINO UNO R3 (ch340) Micro Controller Board with Cable compatible (Make in india)
₹400.00₹900.00inc.GST -
₹385.00
₹500.00inc.GSTTowerPro MG995 – Continuous Rotation 360° Metal Gear Servo Motor
₹385.00₹500.00inc.GST -
4000W 220V DIMMER Voltage Regulators SCR Speed Controller
- 4 Terminals,220V into 0-220V adjustable output,Be sure to take the load transfer
- Mainly used:Thermostat,Dimming,Governor(Heating pipe, Heating wire ,Heating plate,Heating rods,Baisi bulb,Fan,EAF,Solder furnace,Table lamp) and so on
- Voltage: AC 220V Maximum power: 4000W Voltage Regulator: AC 0-220V
₹378.00₹540.00inc.GST4000W 220V DIMMER Voltage Regulators SCR Speed Controller
₹378.00₹540.00inc.GST -
PIC18F4550
Program Memory Type: Flash
Program Memory Size (KB): 32
CPU Speed (MIPS/DMIPS): 12
SRAM Bytes: 2,048
Data EEPROM/HEF (bytes): 256
Digital Communication Peripherals: 1-UART, 1-SPI, 1-I2C1-MSSP(SPI/I2C)
Capture/Compare/PWM Peripherals: 1 CCP, 1 ECCP,
Timers: 1 x 8-bit, 3 x 16-bit
ADC Input: 13 ch, 10-bit
Number of Comparators: 2
Number of USB Modules: 1, FS Device
Temperature Range (C): -40 to 85
Operating Voltage Range (V): 2 to 5.5
Pin Count: 40
₹375.00₹450.00inc.GSTPIC18F4550
₹375.00₹450.00inc.GST -
2Wd Smart Robot Bot with Chassis, Bo Motor, Wheels, Clamps, Battery Box, Switch – robotic kit diy
- Very handy and simple in assembling/disassembling.
- Strong components so as to withstand extreme terrain conditions.
- Transparent Car Chassis.
- Attractive design.
- This car is the tachometer encoder.
- Can use with other devices to realize function of tracing, obstacle avoidance, distance testing, speed testing,
- Size: 21 x 15 cm (L x W).
- Wheel size: 6.5 x 2.7cm (Dia. x H).
₹372.00₹750.00inc.GST -
₹368.00
₹500.00inc.GSTSIM800L GPRS GSM Module Core Board
₹368.00₹500.00inc.GST -
TowardPro MG996R Digital High Torque Servo Motor
- Weight: 56g
- Dimension: 40×19.7×41mm
- Stall torque: 9.4kg/cm (4.8v); 11kg/cm (6.0v)
- Operating speed: 0.19sec/60degree (4.8v); 0.15sec/60degree (6.0v)
- Operating voltage: 4.8 ~ 6.6V
- Gear Type: Metal gear
- Wire length: 32cm
₹363.00₹450.00inc.GSTTowardPro MG996R Digital High Torque Servo Motor
₹363.00₹450.00inc.GST -
MG995 Metal Gear Servo Motor 180º Rotation TowerPro HIGH QULAITY
- High resolution
- Accurate positioning
- Fast control response
- Constant torque throughout the servo travel range
- Excellent holding power
₹352.00₹400.00inc.GSTMG995 Metal Gear Servo Motor 180º Rotation TowerPro HIGH QULAITY
₹352.00₹400.00inc.GST -
₹352.00
₹450.00inc.GST 22% off2.2 Inch Bend Sensor for Hand Gesture Recognition
₹352.00₹450.00inc.GST 22% off -
Arduino Nano V3.0 ATmega328P Controller Board unsoldered
Microcontroller Atmel ATmega328
Operating Voltage (logic level): 5V
Input Voltage (recommended): 7V ~ 12V
Input Voltage (limits): 6V ~ 20 V
Digital I/O Pins: 14 (of which 6 provide PWM output)
Analog Input Pins: 8
DC Current per I/O Pin: 40mA
Flash Memory: 32KB (ATmega328) (of which 2 KB used by bootloader)
SRAM: 2KB (ATmega328)
EEPROM: 1KB (ATmega328)
Clock Speed: 16MHz₹350.00₹656.00inc.GSTArduino Nano V3.0 ATmega328P Controller Board unsoldered
₹350.00₹656.00inc.GST