Best Seller Items
-
PAM8403 5V Two-channel Stereo Mini Class-D Audio Amplifier
- Dual channel stereo, high output power (3 w + 3 w power @ 5V and 4 ohms load)..
- Double panel wiring solves crosstalk.
- Super mini design allows it to be easily placed in a variety of digital products.
- 3W Output at 10% THD with a 4ΩLoad and 5V Power Supply.
- Filterless, Low Quiescent Current and Low EMI and Low Noise.
- Short Circuit Protection and Thermal Shutdown
₹28.00₹50.00inc.GSTPAM8403 5V Two-channel Stereo Mini Class-D Audio Amplifier
₹28.00₹50.00inc.GST -
ATMEGA328 OR ATMEGA8 Arduino breakout board PCB with components unsoldered (Colour may vary)
- High quality FR4 double side pcb.
- ATMEGA328 or ATMEGA8
₹77.00₹150.00inc.GST -
CT Current Transformer 5A mini Sensor ZMCT103C DTCT103C (Color may vary)
- Rated input current: 5A
- Rated output current: 5 mA
- Ratio: 1000: 1
- Linear range: 0-10 A (100 Ohm)
- Linearity: 0.2%
- Insulation voltage: 3000 V
₹33.00₹70.00inc.GSTCT Current Transformer 5A mini Sensor ZMCT103C DTCT103C (Color may vary)
₹33.00₹70.00inc.GST -
TPA3116D2 2.1 Channel Digital Subwoofer Amplifier Board DC, 12-24 V, 2 x 50 W + 100 W
- Applicable speaker impedance: 4-8 ohm.
- Adopts two high-quality TPA3116D2 digital amplifier chips.
- Powered by DC 12-24V, wide input voltage.
- Sound quality is very good, high efficiency and amplifying power.
- 50W x 2+100W Â 2.1 channels(left/right channel and subwoofer channel), high efficiency and low-heat.
- User can adjust the volume by themselves easily.
₹1225.00₹1899.00inc.GSTTPA3116D2 2.1 Channel Digital Subwoofer Amplifier Board DC, 12-24 V, 2 x 50 W + 100 W
₹1225.00₹1899.00inc.GST -
Piezoelectric Sensor Buzzer Transducer/Disc 27mm Piezo sensor
- Sound pressure level: 85DB 10cm
- The input voltage: 30vp-p max
- Operating Temperature: -20~70
- Clear sound
- Ultra-thin and lightweight
- Low power consumption for voltage type
₹6.00₹40.00inc.GSTPiezoelectric Sensor Buzzer Transducer/Disc 27mm Piezo sensor
₹6.00₹40.00inc.GST -
100 RPM Dual Shaft BO Motor
- Low density: lightweight, low inertia.
- Capability to absorb shock and vibration as a result of elastic compliance.
- Rated Speed(After Reduction): 100 RPM
- Rated Torque: 0.35 Kg cm
₹66.00₹100.00inc.GST100 RPM Dual Shaft BO Motor
₹66.00₹100.00inc.GST
-
₹88.00
₹150.00inc.GSTRTC module clock DS1307 WITH Battery
₹88.00₹150.00inc.GST -
Gear Motor 12V DC 60RPM
- There are nuts and threads on shaft to easily connect and internal threaded shaft to connect it to wheel
- Features:Â 12V DC motors with Gearbox 125gm weight Same size motor available in various RPM 5kgcm torque
- No-load current = 60 mA(Max), Load current = 600 mA(Max)
₹187.00₹200.00inc.GSTGear Motor 12V DC 60RPM
₹187.00₹200.00inc.GST -
Speaker 2W 8 OHM High Quality 3x3X1.5cm Loudspeaker
- Maximum output power – 2 Watts
- SIZE 32x32x17mm
- Impedance: 8 OHM
- FREQUENCY RESPONSE:150Hz-20KHz
- Smaller with Higher Power and High Sensitivity
- Â Application for Laptop PC, AIO computer, GPS, Telecom, White Goods and Medical Device
₹100.00 inc.GSTSpeaker 2W 8 OHM High Quality 3x3X1.5cm Loudspeaker
₹100.00 inc.GST -
TTP223 Touch Key Module
- Input Voltage : 2 Volt – 5.5 Volts DC.
- Sensitivity can adjust by the capacitance(0~50pF).
- Stable touching detection of the human body for replacing traditional direct switch key.
- Provides direct mode toggle mode by pad option(TOG pin).
- Auto calibration and Re-calibration period is about 4.0 sec when the key has not be touched.
₹50.00 inc.GSTTTP223 Touch Key Module
₹50.00 inc.GST -
433Mhz RSI Wireless Transmitter Receiver Module
- Range in open space: 30 Meters
- RX IF Frequency: 1MHz
- Very Stable Operating Frequency
- Low Current Consumption (Typ 11mA)
- Wide Operating Voltage (1.5-5v)
₹135.00₹200.00inc.GST433Mhz RSI Wireless Transmitter Receiver Module
₹135.00₹200.00inc.GST -
STM8S003F3P6 system board STM8S003F3 STM8S STM8 development board minimum core board
- 3.3v to 5v supply
- high quality pcb
- Power Source: DC
- RoHS Compliant
- Material: Copper
- Weight: 120
₹168.00₹229.00inc.GSTSTM8S003F3P6 system board STM8S003F3 STM8S STM8 development board minimum core board
₹168.00₹229.00inc.GST -
65mm Robot Wheel ( tyre ) for BO Motors (Yellow)
- Tire with sponge liner for more strength
- New design wheel for better combination with the motor
- Diameter: 65 mm
- Width : 28 mm
- The material of Wheel: High-strength plastic
- The material of Tyre : Rubber
- Color: Yellow
₹40.00₹55.00inc.GST65mm Robot Wheel ( tyre ) for BO Motors (Yellow)
₹40.00₹55.00inc.GST -
Nodemcu Wifi Development Board Esp32 30pin
- Built-in Flash: 32Mbit
- Power supply: 5V
- WiFi protocol: IEEE 802.11 b/g/n
- Peripheral interface: UART/GPIO/ADC/DAC/SDIO/PWM/I2C/I2S
- Logic level: 3.3V
₹480.00₹565.00inc.GSTNodemcu Wifi Development Board Esp32 30pin
₹480.00₹565.00inc.GST -
DC Jack Connector Male
- Product type: DC power jack connector
- Connector type: Male connector
- Shape: cylindrical
- Color: black and silver
- Diameter: 2.1 mm
₹10.00₹60.00inc.GSTDC Jack Connector Male
₹10.00₹60.00inc.GST -
DC-DC Buck Converter 4.5-40V to 3-35V Adjustable Step Down Module
- Input voltage: 4.5-40V,
- Output voltage: (3-35V) continuously adjustable (recommended load debugging).
- Minimum pressure: 1.5V
- Output current: rated current 2A, 3A maximum
- Output Power: 15W maximum
₹66.00₹199.00inc.GSTDC-DC Buck Converter 4.5-40V to 3-35V Adjustable Step Down Module
₹66.00₹199.00inc.GST -
Nema 23 25 Kg-cm 4 Wire Bipolar Stepper Motor High Torque for 3D Printer CNC Robotics DIY Projects
1. Step Angle: 1.8 degree
2. Voltage: 2.3V
3. Current/phase: 2.8A
4. Resistance/phase: 0.98 ohms
5. Holding Torque: 10.1 kg.cm
6. Rotor Inertia: 275 g.cm2
7. Inductance/ phase (mH): 2.2
8. No. of Leads: 4
9. Weight (kg): 0.65
10. Step Angle Accuracy – (+-) 5%
11. Resistance Accuracy – (+-) 10%
12. Inductance Accuracy – (+-) 20%
13. Detent Torque (kg-cm): 0.36
14. Length (mm): 74
15. Frame Size (mm): 57×57
16. Shaft Length (mm): 19
17. Shaft Diameter (mm): 8.5
₹1260.00₹1899.00inc.GSTNema 23 25 Kg-cm 4 Wire Bipolar Stepper Motor High Torque for 3D Printer CNC Robotics DIY Projects
₹1260.00₹1899.00inc.GST -
₹50.00
₹99.00inc.GSTFlame Sensor infrared Receiver Ignition source detection module (color may vary )
₹50.00₹99.00inc.GST -
5V Passive Buzzer
- Input Voltage(Max.) : 5V
- Resistance: 42 Ω
- Resonance Frequency: 2048 Hz
- Body Size : 12 x 8mm
- Pin Pitch: 6mm
- External Material: Plastic;
- Color: Black
₹15.75₹50.00inc.GST5V Passive Buzzer
₹15.75₹50.00inc.GST -
mq9 Combustible Gas Sensor Module / Carbon Monoxide, Methane and LPG Gas Sensor
- Good sensitivity to CO/Combustible Gas
- High sensitivity to Methane, Propane, and CO
- Long life and low cost
- Simple drive circuit
- Input voltage: DC 5±0.2V
- Current Consumption: 150mA
₹147.00₹500.00inc.GSTmq9 Combustible Gas Sensor Module / Carbon Monoxide, Methane and LPG Gas Sensor
₹147.00₹500.00inc.GST -
DHT22 Digital Temperature and Humidity Sensor Module AM2302
- Measuring range: temperature -40-80 ℃; humidity 0; 99.9%RH
- Measurement accuracy (25℃): temperature: + 0.5; humidity: + 2%RH (10; 90%RH)
- Resolution: temperature: 0.1 ℃, humidity: 0.1%RH
- Attenuation value: temperature: <1℃ / year; humidity: < 1%RH/ years
- High precision
- Capacitive type
- Full range temperature compensated
- Relative humidity and temperature measurement
- Calibrated digital signal
- Outstanding long-term stability
₹329.00₹500.00inc.GSTDHT22 Digital Temperature and Humidity Sensor Module AM2302
₹329.00₹500.00inc.GST