Best Seller Items
-
PAM8403 5V Two-channel Stereo Mini Class-D Audio Amplifier
- Dual channel stereo, high output power (3 w + 3 w power @ 5V and 4 ohms load)..
- Double panel wiring solves crosstalk.
- Super mini design allows it to be easily placed in a variety of digital products.
- 3W Output at 10% THD with a 4ΩLoad and 5V Power Supply.
- Filterless, Low Quiescent Current and Low EMI and Low Noise.
- Short Circuit Protection and Thermal Shutdown
₹28.00₹50.00inc.GSTPAM8403 5V Two-channel Stereo Mini Class-D Audio Amplifier
₹28.00₹50.00inc.GST -
ATMEGA328 OR ATMEGA8 Arduino breakout board PCB with components unsoldered (Colour may vary)
- High quality FR4 double side pcb.
- ATMEGA328 or ATMEGA8
₹77.00₹150.00inc.GST -
CT Current Transformer 5A mini Sensor ZMCT103C DTCT103C (Color may vary)
- Rated input current: 5A
- Rated output current: 5 mA
- Ratio: 1000: 1
- Linear range: 0-10 A (100 Ohm)
- Linearity: 0.2%
- Insulation voltage: 3000 V
₹33.00₹70.00inc.GSTCT Current Transformer 5A mini Sensor ZMCT103C DTCT103C (Color may vary)
₹33.00₹70.00inc.GST -
TPA3116D2 2.1 Channel Digital Subwoofer Amplifier Board DC, 12-24 V, 2 x 50 W + 100 W
- Applicable speaker impedance: 4-8 ohm.
- Adopts two high-quality TPA3116D2 digital amplifier chips.
- Powered by DC 12-24V, wide input voltage.
- Sound quality is very good, high efficiency and amplifying power.
- 50W x 2+100W Â 2.1 channels(left/right channel and subwoofer channel), high efficiency and low-heat.
- User can adjust the volume by themselves easily.
₹1225.00₹1899.00inc.GSTTPA3116D2 2.1 Channel Digital Subwoofer Amplifier Board DC, 12-24 V, 2 x 50 W + 100 W
₹1225.00₹1899.00inc.GST -
Piezoelectric Sensor Buzzer Transducer/Disc 27mm Piezo sensor
- Sound pressure level: 85DB 10cm
- The input voltage: 30vp-p max
- Operating Temperature: -20~70
- Clear sound
- Ultra-thin and lightweight
- Low power consumption for voltage type
₹6.00₹40.00inc.GSTPiezoelectric Sensor Buzzer Transducer/Disc 27mm Piezo sensor
₹6.00₹40.00inc.GST -
100 RPM Dual Shaft BO Motor
- Low density: lightweight, low inertia.
- Capability to absorb shock and vibration as a result of elastic compliance.
- Rated Speed(After Reduction): 100 RPM
- Rated Torque: 0.35 Kg cm
₹66.00₹100.00inc.GST100 RPM Dual Shaft BO Motor
₹66.00₹100.00inc.GST
-
Vibration Sensor Module SW520D
- The working voltage of 3.3V-5V.
- The comparator output, the signal clean, good waveform, driving ability, more than 15mA
- With a fixed bolt hole, easy to install.
- The use of wide voltage LM393 comparator.
₹42.00₹70.00inc.GSTVibration Sensor Module SW520D
₹42.00₹70.00inc.GST -
ATMEGA8 Arduino breakout board
- Inbuilt crystal 16mhz
- 22 pf capacitor
₹43.00₹80.00inc.GSTATMEGA8 Arduino breakout board
₹43.00₹80.00inc.GST -
4×3 Matrix Keypad
- Ultra-thin design & adhesive backing provides easy integration to any project
- Excellent price-performance ratio
- Easy communication with any microcontroller
- Sticker can peel off for adhesive mounting.
₹44.00₹90.00inc.GST 51% off4×3 Matrix Keypad
₹44.00₹90.00inc.GST 51% off -
High RPM Drone Motor (single motor)
- Model: 615
- Shaft Size: 1.0 mm
- Rated Voltage: 3.7 V.
- Rated RPM: 60000.
- Wire Length: 6cm
- Prop. Length: 55mm
- Prop. Material: Glass Fiber
₹45.00₹95.00inc.GSTHigh RPM Drone Motor (single motor)
₹45.00₹95.00inc.GST -
ULN2003 Driver Module Stepper Motor Driver Board
- ULN2003A motor driver chip
- Chip all the pins already leads for easy connection to use
- 5-12V power supply
- 4-way signal indicator
- Step angle: 5.625 x 1 / 64
- Reduction ratio: 1 / 64
- Phase: 4
- Current / Phase: 5V
₹45.00₹399.00inc.GSTULN2003 Driver Module Stepper Motor Driver Board
₹45.00₹399.00inc.GST -
CNC 3D Printer Mech Endstop Limit Switch
- Wire type:Â 22AWG
- Working voltage: 300V
- Working Current: 2A
- Temperature resistance: 80° C
- Cable length: 70cm
₹46.00₹150.00inc.GSTCNC 3D Printer Mech Endstop Limit Switch
₹46.00₹150.00inc.GST -
-
₹50.00
₹99.00inc.GSTFlame Sensor infrared Receiver Ignition source detection module (color may vary )
₹50.00₹99.00inc.GST -
TTP223 Touch Key Module
- Input Voltage : 2 Volt – 5.5 Volts DC.
- Sensitivity can adjust by the capacitance(0~50pF).
- Stable touching detection of the human body for replacing traditional direct switch key.
- Provides direct mode toggle mode by pad option(TOG pin).
- Auto calibration and Re-calibration period is about 4.0 sec when the key has not be touched.
₹50.00 inc.GSTTTP223 Touch Key Module
₹50.00 inc.GST -
₹50.00
₹65.00inc.GST1 Channel 5V Relay Module without Optocoupler
₹50.00₹65.00inc.GST -
Keypad 4×4 -47
Maximum Voltage across EACH SEGMENT or BUTTON: 24V
Maximum Current through  EACH SEGMENT or BUTTON: 30mA
Maximum operating temperature: 0°C to 50°C
Ultra-thin design
Adhesive backing
Easy interface
Long life.
₹52.00₹90.00inc.GSTKeypad 4×4 -47
₹52.00₹90.00inc.GST -
Cable For Arduino UNO or MEGA (USB A to B) 1 FEET
- USB Type: Type-A to Type-B
- Weight: 25 gm.
- Length: 52 cm.
- Fully compatible with the PC.
- Aluminum under-mold shield helps meet FCC requirements on KMI/RFI interference.
₹52.00₹70.00inc.GSTCable For Arduino UNO or MEGA (USB A to B) 1 FEET
₹52.00₹70.00inc.GST -
BMP180 GY68 Digital Barometric Pressure Sensor Board Module GY-68 For Arduino
- GY-68 BMP180 GY68
- Digital Barometric Pressure Sensor Board Module
- compatible with BMP085 For Arduino
₹53.00₹100.00inc.GSTBMP180 GY68 Digital Barometric Pressure Sensor Board Module GY-68 For Arduino
₹53.00₹100.00inc.GST -
Soil Moisture Sensor Module
Digital output, easy to adjust
Nickel plating to avoid corrosion
Working voltage: 3.3V-5V
On-board LM393 chip
Dimension of the board: 3.2cm * 1.4cm
₹54.00₹120.00inc.GSTSoil Moisture Sensor Module
₹54.00₹120.00inc.GST -
Wheel 7cm x 4cm Width HOLE 6M
- Shaft Diameter – 6 mm
- Wheel Diameter – 70 mm
- Wheel Width – 40 mm
₹54.00₹150.00inc.GSTWheel 7cm x 4cm Width HOLE 6M
₹54.00₹150.00inc.GST -