Best Seller Items
-
PAM8403 5V Two-channel Stereo Mini Class-D Audio Amplifier
- Dual channel stereo, high output power (3 w + 3 w power @ 5V and 4 ohms load)..
- Double panel wiring solves crosstalk.
- Super mini design allows it to be easily placed in a variety of digital products.
- 3W Output at 10% THD with a 4ΩLoad and 5V Power Supply.
- Filterless, Low Quiescent Current and Low EMI and Low Noise.
- Short Circuit Protection and Thermal Shutdown
₹28.00₹50.00inc.GSTPAM8403 5V Two-channel Stereo Mini Class-D Audio Amplifier
₹28.00₹50.00inc.GST -
ATMEGA328 OR ATMEGA8 Arduino breakout board PCB with components unsoldered (Colour may vary)
- High quality FR4 double side pcb.
- ATMEGA328 or ATMEGA8
₹77.00₹150.00inc.GST -
CT Current Transformer 5A mini Sensor ZMCT103C DTCT103C (Color may vary)
- Rated input current: 5A
- Rated output current: 5 mA
- Ratio: 1000: 1
- Linear range: 0-10 A (100 Ohm)
- Linearity: 0.2%
- Insulation voltage: 3000 V
₹33.00₹70.00inc.GSTCT Current Transformer 5A mini Sensor ZMCT103C DTCT103C (Color may vary)
₹33.00₹70.00inc.GST -
TPA3116D2 2.1 Channel Digital Subwoofer Amplifier Board DC, 12-24 V, 2 x 50 W + 100 W
- Applicable speaker impedance: 4-8 ohm.
- Adopts two high-quality TPA3116D2 digital amplifier chips.
- Powered by DC 12-24V, wide input voltage.
- Sound quality is very good, high efficiency and amplifying power.
- 50W x 2+100W Â 2.1 channels(left/right channel and subwoofer channel), high efficiency and low-heat.
- User can adjust the volume by themselves easily.
₹1225.00₹1899.00inc.GSTTPA3116D2 2.1 Channel Digital Subwoofer Amplifier Board DC, 12-24 V, 2 x 50 W + 100 W
₹1225.00₹1899.00inc.GST -
Piezoelectric Sensor Buzzer Transducer/Disc 27mm Piezo sensor
- Sound pressure level: 85DB 10cm
- The input voltage: 30vp-p max
- Operating Temperature: -20~70
- Clear sound
- Ultra-thin and lightweight
- Low power consumption for voltage type
₹6.00₹40.00inc.GSTPiezoelectric Sensor Buzzer Transducer/Disc 27mm Piezo sensor
₹6.00₹40.00inc.GST -
100 RPM Dual Shaft BO Motor
- Low density: lightweight, low inertia.
- Capability to absorb shock and vibration as a result of elastic compliance.
- Rated Speed(After Reduction): 100 RPM
- Rated Torque: 0.35 Kg cm
₹66.00₹100.00inc.GST100 RPM Dual Shaft BO Motor
₹66.00₹100.00inc.GST
-
Water Pump Micro DC 3-6V
Operating Voltage : 2.5 ~ 6V
Operating Current : 130 ~ 220mA
Flow Rate : 80 ~ 120 L/H
Maximum Lift : 40 ~ 110 mm
Continuous Working Life : 500 hours
Driving Mode : DC, Magnetic Driving
Material : Engineering Plastic
Outlet Outside Diameter : 7.5 mm
Outlet Inside Diameter : 5 mm
₹95.00₹190.00inc.GSTWater Pump Micro DC 3-6V
₹95.00₹190.00inc.GST -
Mini Breadboard(400 Points)
An electronics breadboard is actually referring to a solderless breadboard.
These are great units for making temporary circuits and prototyping, and they require absolutely no soldering.
Prototyping is the process of testing out an idea by creating a preliminary model from which other forms are developed or copied, and it is one of the most common uses for breadboards.
₹68.00₹100.00inc.GSTMini Breadboard(400 Points)
₹68.00₹100.00inc.GST -
Stepper Motor Nema-17
200 steps per revolution, 1.8 degrees
Bipolar stepper, requires 2 full H-bridges!
4-wire, 8 inch leads
42mm/1.65″ square body
31mm/1.22″ square mounting holes, 3mm metric screws (M3)
5mm diameter drive shaft, 24mm long, with a machined flat
12V rated voltage (you can drive it at a lower voltage, but the torque will drop) at 350mA max current
28 oz*in, 20 N*cm, 2 Kg*cm holding torque per phase
35 ohms per winding
₹630.00₹731.60inc.GSTStepper Motor Nema-17
₹630.00₹731.60inc.GST -
NodeMCU esp8266 Wifi Internet of Things Development Board Cp2102 Iot node
NodeMCU DEVKIT 1.0Â Specification:
Developer :Â ESP8266 Opensource Community
Type :Â Â Single-board microcontroller
Operating system :Â XTOS
CPU :Â ESP8266
Memory :Â 128kBytes
Storage :Â 4MBytes
Power By :Â USB
Power Voltage :Â 3v ,5v (used with 3.3v Regulator which inbuilt on Board using Pin VIN)
Code :Â Arduino Cpp
IDE Used :Â Arduino IDE
GPIO :Â 10₹326.00₹499.00inc.GSTNodeMCU esp8266 Wifi Internet of Things Development Board Cp2102 Iot node
₹326.00₹499.00inc.GST -
SG90 Servo Motors
Operating Voltage is 5V typically
Torque: 1.8 kg-cm (4.8v)
Speed: 0.10 sec/60
Gear Type: Plastic
Rotation : 0°-180°
Weight of motor : 40gm₹137.00₹180.00inc.GSTSG90 Servo Motors
₹137.00₹180.00inc.GST -
Raspberry Pi Camera Board Module rev 1.3 5 Megapixel
Second generation raspberry pi camera module with fixed focus lens
Features official raspberry pi camera module v2 1080p
2592 x 1944 pixel static images, This module is only capable of taking pictures and video, not sound,1080p30 video₹350.00₹500.00inc.GSTRaspberry Pi Camera Board Module rev 1.3 5 Megapixel
₹350.00₹500.00inc.GST -
GPS module (NEO-6M GPS )
Interface: UART interface, with logical level converter, 3.3V-5V interface compatible
SunRobotics ublox neo-6m gps module (3.3V-5V interface with eeprom and flash)
Board size: 23mm*40mm
Antenna: High gain active anttenna and good performance. 25mm*25mm₹300.00₹700.00inc.GSTGPS module (NEO-6M GPS )
₹300.00₹700.00inc.GST -
Arduino Mega 2560
Place Product ImageMicrocontroller: AT91SAM3X8E , Operating Voltage: 3.3V , Input Voltage (recommended): 7-12V
Input Voltage (limits): 6-16V , Digital I/O Pins: 54 (of which 12 provide PWM output) Analog Input Pins: 12 , Analog Outputs Pins: 2 (DAC)
Total DC Output Current on all I/O lines: 130 mA , DC Current for 3.3V Pin: 800 mA , DC Current for 5V Pin: 800 mA
Flash Memory : 512 KB all available for the user applications , SRAM: 96 KB (two banks: 64KB and 32KB)
Clock Speed: 84 MHz , Dimensions: 104 x 53 x 15mm , Weight: 35g₹1005.00₹1500.00inc.GSTArduino Mega 2560
₹1005.00₹1500.00inc.GST -
₹40.00
₹50.00inc.GST2.1×5.5mm DC Power Jack Socket Panel Mount (Female) -5 pieces
₹40.00₹50.00inc.GST -
-
18650 2 Cell Holder Series battery
This is a Black Plastic Storage Box Case Holder for Battery 2 x 18650 Cell Box, without Cover.
The case box can keep your batteries organized and protected. The holder case is designed with leads for easy to solder and connect. This battery holder case is perfect for the devices need a 7.2V external battery.
This Battery Holder is compatible with our 18650 Li-ION Batteries which you need to buy separately.
- Hold 2 standard 18650 batteries.
- Wire Length: 10-15 cm.
- Output: 7.2v.
- Dimension (Appro.) : 76 x 40 x 20 mm
- Weight: 12gm
- High-quality plastic material
₹27.00₹28.00inc.GST18650 2 Cell Holder Series battery
₹27.00₹28.00inc.GST -
BC547B TO92 CDIL NPN Transistor 45V 100mA
Collector-Base Voltage (Vcb) (V) 50 Collector-Emitter Voltage (Vce) (V) 45 Emitter-Base Voltage (Veb) (V) 6 Collector Current (DC) (A) 100m Junction Temperature (°C) 150 Storage condition (℃) -65 to 150 Length (mm) 4.5 Width (mm) 3.5 Height (mm) 19 Weight (gm) 1 (approx) (each) Shipment Weight 0.01 kg Shipment Dimensions 5 × 8 × 2 cm ₹1.25₹1.50inc.GSTBC547B TO92 CDIL NPN Transistor 45V 100mA
₹1.25₹1.50inc.GST -
10K ohm 0.125W CFR RESISTOR TOLERANCE 5%
WATTAGE 0.125W TOLERANCE 5% TYPE OF ITEM CARBON FILM RESISTOR TOTAL LENGTH 60MM ₹0.20₹0.25inc.GST10K ohm 0.125W CFR RESISTOR TOLERANCE 5%
₹0.20₹0.25inc.GST -
PIC16F873-04/SP – MICROCHIP
Processor: It is based on the 8-bit PIC architecture, specifically the PIC16 family.
CPU Speed: The maximum CPU speed of the PIC16F873-04/SP is 4 MHz.
Flash Memory: It has 7.37 KB (8192 words) of flash program memory for storing the user’s program code.
RAM: The microcontroller has 192 bytes of RAM for data storage.
I/O Pins: It has a total of 22 I/O pins, which can be configured as digital inputs or outputs.
Timers: The PIC16F873-04/SP features three timers: Timer0, Timer1, and Timer2. These timers can be used for various timing and counting purposes.
Analog-to-Digital Converter (ADC): It includes an 8-channel, 10-bit ADC module that can convert analog signals into digital values.
Serial Communication: The microcontroller supports multiple serial communication protocols, including UART (Universal Asynchronous Receiver-Transmitter) and SPI (Serial Peripheral Interface).
Interrupts: It has several interrupt sources that can be used to handle external events and improve the responsiveness of the system.
Power-Saving Features: The PIC16F873-04/SP includes power-saving features such as a low-power sleep mode, which helps conserve energy in battery-powered applications.
Operating Voltage: It operates at a voltage range of 2.0V to 5.5V, making it suitable for a variety of applications.
Package: The PIC16F873-04/SP is available in a 28-pin plastic DIP (Dual Inline Package) or SPDIP (Shrink Plastic Dual Inline Package).
₹567.00₹697.00inc.GSTPIC16F873-04/SP – MICROCHIP
₹567.00₹697.00inc.GST -
PIC16F877A-I/P DIP40 Microcontroller MCP
The PIC16F877AÂ is a 28/40/44-Pin Enhanced Flash Microcontrollers . The following are the features:-
• Timer0: 8-bit timer/counter with 8-bit prescaler
• Timer1: 16-bit timer/counter with prescaler, can be incremented during Sleep via external crystal/clock
• Timer2: 8-bit timer/counter with 8-bit period register, prescaler and postscaler
• Two Capture, Compare, PWM modules
– Capture is 16-bit, max. resolution is 12.5 ns
– Compare is 16-bit, max. resolution is 200 ns
– PWM max. resolution is 10-bit
• Synchronous Serial Port (SSP) with SPI (Master mode) and I2C™ (Master/Slave)
Universal Synchronous Asynchronous Receiver Transmitter (USART/SCI) with 9-bit address detection
• Parallel Slave Port (PSP) – 8 bits wide with external RD, WR and CS controls (40/44-pin only)
• Brown-out detection circuitry for Brown-out Reset (BOR)
₹312.00₹330.00inc.GSTPIC16F877A-I/P DIP40 Microcontroller MCP
₹312.00₹330.00inc.GST -
7432 U74HC32L DIP14 OR gate
The 74HC32 is a 14 Pin Quad 2-Input OR Gate IC. The 74HC32 provides four independent 2-input OR gates with standard push-pull outputs. The device is designed for operation with a power supply range of 2.0V to 6.0V.  Inputs include clamp diodes. This enables the use of current limiting resistors to interface inputs to voltages in excess of VCC.
₹11.00₹15.00inc.GST7432 U74HC32L DIP14 OR gate
₹11.00₹15.00inc.GST