Best Seller Items
-
PAM8403 5V Two-channel Stereo Mini Class-D Audio Amplifier
- Dual channel stereo, high output power (3 w + 3 w power @ 5V and 4 ohms load)..
- Double panel wiring solves crosstalk.
- Super mini design allows it to be easily placed in a variety of digital products.
- 3W Output at 10% THD with a 4ΩLoad and 5V Power Supply.
- Filterless, Low Quiescent Current and Low EMI and Low Noise.
- Short Circuit Protection and Thermal Shutdown
₹28.00₹50.00inc.GSTPAM8403 5V Two-channel Stereo Mini Class-D Audio Amplifier
₹28.00₹50.00inc.GST -
ATMEGA328 OR ATMEGA8 Arduino breakout board PCB with components unsoldered (Colour may vary)
- High quality FR4 double side pcb.
- ATMEGA328 or ATMEGA8
₹77.00₹150.00inc.GST -
CT Current Transformer 5A mini Sensor ZMCT103C DTCT103C (Color may vary)
- Rated input current: 5A
- Rated output current: 5 mA
- Ratio: 1000: 1
- Linear range: 0-10 A (100 Ohm)
- Linearity: 0.2%
- Insulation voltage: 3000 V
₹33.00₹70.00inc.GSTCT Current Transformer 5A mini Sensor ZMCT103C DTCT103C (Color may vary)
₹33.00₹70.00inc.GST -
TPA3116D2 2.1 Channel Digital Subwoofer Amplifier Board DC, 12-24 V, 2 x 50 W + 100 W
- Applicable speaker impedance: 4-8 ohm.
- Adopts two high-quality TPA3116D2 digital amplifier chips.
- Powered by DC 12-24V, wide input voltage.
- Sound quality is very good, high efficiency and amplifying power.
- 50W x 2+100W Â 2.1 channels(left/right channel and subwoofer channel), high efficiency and low-heat.
- User can adjust the volume by themselves easily.
₹1225.00₹1899.00inc.GSTTPA3116D2 2.1 Channel Digital Subwoofer Amplifier Board DC, 12-24 V, 2 x 50 W + 100 W
₹1225.00₹1899.00inc.GST -
Piezoelectric Sensor Buzzer Transducer/Disc 27mm Piezo sensor
- Sound pressure level: 85DB 10cm
- The input voltage: 30vp-p max
- Operating Temperature: -20~70
- Clear sound
- Ultra-thin and lightweight
- Low power consumption for voltage type
₹6.00₹40.00inc.GSTPiezoelectric Sensor Buzzer Transducer/Disc 27mm Piezo sensor
₹6.00₹40.00inc.GST -
100 RPM Dual Shaft BO Motor
- Low density: lightweight, low inertia.
- Capability to absorb shock and vibration as a result of elastic compliance.
- Rated Speed(After Reduction): 100 RPM
- Rated Torque: 0.35 Kg cm
₹66.00₹100.00inc.GST100 RPM Dual Shaft BO Motor
₹66.00₹100.00inc.GST
-
ESP32-CAM 2MP Wi-Fi Bluetooth Development Board with OV2640 Camera Module
- Flash LED off: 180mA @ 5V.
- Flash LED on to maximum brightness: 310mA @ 5V.
- Deep-sleep: 6mA @ 5V min.
- Modem-sleep: 20mA @ 5V min.
- Light-sleep: 6.7mA @ 5V min.
₹614.00₹800.00inc.GSTESP32-CAM 2MP Wi-Fi Bluetooth Development Board with OV2640 Camera Module
₹614.00₹800.00inc.GST -
ATMEGA8 Arduino breakout board
- Inbuilt crystal 16mhz
- 22 pf capacitor
₹43.00₹80.00inc.GSTATMEGA8 Arduino breakout board
₹43.00₹80.00inc.GST -
₹27.00
₹35.00inc.GST4 x 1.5V Battery Holder Without Cover
₹27.00₹35.00inc.GST -
Nodemcu Wifi Development Board Esp32 30pin
- Built-in Flash: 32Mbit
- Power supply: 5V
- WiFi protocol: IEEE 802.11 b/g/n
- Peripheral interface: UART/GPIO/ADC/DAC/SDIO/PWM/I2C/I2S
- Logic level: 3.3V
₹480.00₹565.00inc.GSTNodemcu Wifi Development Board Esp32 30pin
₹480.00₹565.00inc.GST -
USB ASP AVR Programming Device for ATMEL Processors
- Compatible Chips:
- ATMega Series
- Tiny Series
- Classic Series
- CAN Series
- PWM Series
₹350.00 inc.GSTUSB ASP AVR Programming Device for ATMEL Processors
₹350.00 inc.GST - Compatible Chips:
-
CP2102 module USB to TTL serial UART
- Brand new and high quality.
- PCB Dimensions: 26.5mm * 15.6mm
- Weight: 4g
- using a new chip factory in 2013 CP2102
- with three LEDs: power indicator, data reception indicator, the data transmission indicator, working status
- with 3.3V and 5V dual power output
- pin leads to all sorts of useful
₹160.00₹250.00inc.GSTCP2102 module USB to TTL serial UART
₹160.00₹250.00inc.GST -
BMP180 GY68 Digital Barometric Pressure Sensor Board Module GY-68 For Arduino
- GY-68 BMP180 GY68
- Digital Barometric Pressure Sensor Board Module
- compatible with BMP085 For Arduino
₹53.00₹100.00inc.GSTBMP180 GY68 Digital Barometric Pressure Sensor Board Module GY-68 For Arduino
₹53.00₹100.00inc.GST -
1K Ohm 0.25W Carbon Film Resistors (Pack of 50)
- Product Code=CFR-W25-1K
- Color Code: Brown, Black, Red, Golden
- 1 K ohm 1/4 watt high quality carbon film resistor (CFR) with ±5% tolerance and Tin Plated Copper Leads.
- It is a 1 K Ohm 0.25W Carbon Film Resistor.
- This resistor is for through-hole applications.
₹60.00 inc.GST1K Ohm 0.25W Carbon Film Resistors (Pack of 50)
₹60.00 inc.GST -
4.7 Ohm 0.25W Carbon Film Resistor (Pack of 50)
- Product Code=CFR-W25-4K7
- 4.7K Ohm 0.25W Carbon Film Resistor (CFR) with ±5% Tolerance.
- 4.7K Ohm Resistor Color Code: Yellow, Violet, Red, Golden.
- Approximate Max Current: Â 7.293mA.
₹60.00 inc.GST4.7 Ohm 0.25W Carbon Film Resistor (Pack of 50)
₹60.00 inc.GST -
10K Ohm 0.25Watt Resistor (Pack of 50)
- Product Code=CFR-W25-10K
- 10K Ohm 0.25W Carbon Film Resistor (CFR) with ±5% Tolerance.
- 10K Ohm Resistor Color Code :Brown, Black, Orange, Golden.
- Approximate Max Current :Â 5mA.
₹60.00 inc.GST10K Ohm 0.25Watt Resistor (Pack of 50)
₹60.00 inc.GST -
DC Jack Connector Male
- Product type: DC power jack connector
- Connector type: Male connector
- Shape: cylindrical
- Color: black and silver
- Diameter: 2.1 mm
₹10.00₹60.00inc.GSTDC Jack Connector Male
₹10.00₹60.00inc.GST -
₹26.00
₹50.00inc.GST4 Way Slide Switch 2.54mm Pitch
₹26.00₹50.00inc.GST -
STM8S105K4T6 Minimum System Board
- 100% Brand new and high-quality STM8 Board
- Model: STM8S105K4T6.
- Core: ARM 8 Cortex CPU.
- 16MHz work frequency.
- 32K flash memory, 2K SRAM.
₹250.00 inc.GSTSTM8S105K4T6 Minimum System Board
₹250.00 inc.GST -
RFID Card Reader Module
- Integrated MF RC522
- 13.56MHz contactless communication card chip.
- The low-voltage, low-cost, small size of the non-contact card chip to read and write.
- Working current：13 – 26mA / DC 3.3V
- Standby current：10 – 13mA / DC 3.3V
- Sleep current：<80uA
- Peak current：<30mA
- Working frequency：13.56MHz
- Card reading distance ：0～60mm （Mifare1 card
₹263.00₹300.00inc.GSTRFID Card Reader Module
₹263.00₹300.00inc.GST -
Arduino Pro Mini Atmega328 ProMini
- Microcontroller: ATmega328
- Circuit Operating Voltage: 5V
- Clock frequency: 16MHz.
- Digital I/O Pins: 14
- 8 analog input port: A0 ~ A7.
- A pair of TTL level serial port transceiver : RX / TX.
- 6 PWM port: D3, D5, D6, D9, D10, D11.
- Support serial download.
₹308.00₹350.00inc.GSTArduino Pro Mini Atmega328 ProMini
₹308.00₹350.00inc.GST -
DC 6-36V M12 Inductive 4mm Proximity Sensor Switch
- Operating Voltage: DC 6-36V.
- Output Type: PNP Normally Open Three-line.
- Detection object: Metal Objects.
- Detection distance (mm): 1 – 4.
- Output Current: 300 mA.
- Cable Length: Approx 1.1 m.
- Mounting thread diameter: 12 mm.
₹200.00₹250.00inc.GSTDC 6-36V M12 Inductive 4mm Proximity Sensor Switch
₹200.00₹250.00inc.GST