Best Seller Items
-
PAM8403 5V Two-channel Stereo Mini Class-D Audio Amplifier
- Dual channel stereo, high output power (3 w + 3 w power @ 5V and 4 ohms load)..
- Double panel wiring solves crosstalk.
- Super mini design allows it to be easily placed in a variety of digital products.
- 3W Output at 10% THD with a 4ΩLoad and 5V Power Supply.
- Filterless, Low Quiescent Current and Low EMI and Low Noise.
- Short Circuit Protection and Thermal Shutdown
₹28.00₹50.00inc.GSTPAM8403 5V Two-channel Stereo Mini Class-D Audio Amplifier
₹28.00₹50.00inc.GST -
ATMEGA328 OR ATMEGA8 Arduino breakout board PCB with components unsoldered (Colour may vary)
- High quality FR4 double side pcb.
- ATMEGA328 or ATMEGA8
₹77.00₹150.00inc.GST -
CT Current Transformer 5A mini Sensor ZMCT103C DTCT103C (Color may vary)
- Rated input current: 5A
- Rated output current: 5 mA
- Ratio: 1000: 1
- Linear range: 0-10 A (100 Ohm)
- Linearity: 0.2%
- Insulation voltage: 3000 V
₹33.00₹70.00inc.GSTCT Current Transformer 5A mini Sensor ZMCT103C DTCT103C (Color may vary)
₹33.00₹70.00inc.GST -
TPA3116D2 2.1 Channel Digital Subwoofer Amplifier Board DC, 12-24 V, 2 x 50 W + 100 W
- Applicable speaker impedance: 4-8 ohm.
- Adopts two high-quality TPA3116D2 digital amplifier chips.
- Powered by DC 12-24V, wide input voltage.
- Sound quality is very good, high efficiency and amplifying power.
- 50W x 2+100W Â 2.1 channels(left/right channel and subwoofer channel), high efficiency and low-heat.
- User can adjust the volume by themselves easily.
₹1225.00₹1899.00inc.GSTTPA3116D2 2.1 Channel Digital Subwoofer Amplifier Board DC, 12-24 V, 2 x 50 W + 100 W
₹1225.00₹1899.00inc.GST -
Piezoelectric Sensor Buzzer Transducer/Disc 27mm Piezo sensor
- Sound pressure level: 85DB 10cm
- The input voltage: 30vp-p max
- Operating Temperature: -20~70
- Clear sound
- Ultra-thin and lightweight
- Low power consumption for voltage type
₹6.00₹40.00inc.GSTPiezoelectric Sensor Buzzer Transducer/Disc 27mm Piezo sensor
₹6.00₹40.00inc.GST -
100 RPM Dual Shaft BO Motor
- Low density: lightweight, low inertia.
- Capability to absorb shock and vibration as a result of elastic compliance.
- Rated Speed(After Reduction): 100 RPM
- Rated Torque: 0.35 Kg cm
₹66.00₹100.00inc.GST100 RPM Dual Shaft BO Motor
₹66.00₹100.00inc.GST
-
AT89S51 DIP-40 8051 89S51
- Power Source: DC
- RoHS Compliant
- Material: Silicone
- Weight: 0.007
₹85.00₹100.00inc.GSTAT89S51 DIP-40 8051 89S51
₹85.00₹100.00inc.GST -
PAM8403 With Potentiometer
- Operating voltage: 2.5V-5.5V
- Maximum output power: 3W x 2
- PCB size is about: length 30mm width 22mm overall height after installed is about 16mm
- Built with switch Potentiometer, can adjust the volume & control power switch freely!
- Flexible assembly usage
₹62.70₹100.00inc.GSTPAM8403 With Potentiometer
₹62.70₹100.00inc.GST -
Current Transformer 20A CT AC CURRENT SENSOR
- Winding Ratio 1:1200
- Frequency : 50 Hz
- Recommended Burden Resistance (Ru) : 120 Ohms @ V out = 0.5 Volts.
- Maximum Primary Current (Imax) : 20 Amp.
- AC CURRENT MEASUREMENTS ONLY
- CAN NOT USE IN DC
₹94.00₹100.00inc.GSTCurrent Transformer 20A CT AC CURRENT SENSOR
₹94.00₹100.00inc.GST -
ST Link V2 Programmer For STM8 and STM32 ( color may vary )
- PCB installed inside of aluminum alloy U disk shell, portable, safe and reliable!
- Interface definition directly marked on the shell, clear, convenient and practical!
- 5V, 3.3V offers at the same time, allowing you to program your target board with both 5V and 3.3V.
- SWIM cable for connection to the application via a pin header or a 2.54 mm pitch connector.
- SWIM programming speed rate: 9.7 Kbytes/s in low speed and 12.8 Kbytes/s in high speed.
₹650.00 inc.GSTST Link V2 Programmer For STM8 and STM32 ( color may vary )
₹650.00 inc.GST -
L298N 2A Based Motor Driver Module
- Current Sense for each motor.
- Heatsink for better performance.
- Power-On LED indicator.
- Double H bridge Drive Chip:Â L298N.
- Operating Voltage(VDC): 5~35
- Peak Current (A): 2
- Continuous Current (A): 0-36mA
- No. of Channels: 2
- Over-Current Protection (A): Yes
- Thermal Protection: Yes
₹143.00₹200.00inc.GSTL298N 2A Based Motor Driver Module
₹143.00₹200.00inc.GST -
Alcohol Detector Gas Sensor Module MQ-3
- Power requirements: 5 VDC @ ~165 mA (heater on) / ~60 mA (heater off).
- Current Consumption: 150mA.
- DO output:Â 0.1 and 5V.
- AO output: 0.1- 0.3 V (relative to pollution), the maximum concentration of a voltage of about 4V
- Detecting Concentration: 0.05-10mg/L Alcohol.
₹139.00₹149.00inc.GSTAlcohol Detector Gas Sensor Module MQ-3
₹139.00₹149.00inc.GST -
₹220.50
₹299.00inc.GSTTCS3200 Color Recognition Sensor Module
₹220.50₹299.00inc.GST -
₹189.75
₹250.00inc.GSTMPU-6050 3-Axis Accelerometer and Gyroscope Sensor
₹189.75₹250.00inc.GST -
Piezo Electronic Buzzer Beep Alarm Bell Continuous Sound 3v-24v Buzzer Electromagnetic
- Supply Voltage:12VDC
- Sound Output: 85dB
- Colour: Black
- Wire Length: 110mm
₹18.90₹50.00inc.GST -
MQ-6 Gas Sensor module LPG Detector Sensor Liquefied Petroleum Isobutane Propane Gas Sensor module
- Model: MQ-6
- Operating Voltage: 5V DC
- Detecting Range:200-10000 ppm
- Relative Humidity:<95% RH
₹131.00₹599.00inc.GST -
MQ-7 Detector Module- Methane, Butane, LPG, Smoke Sensor CO Carbon Monoxide Coal Gas Sensor Module
- Operating voltage: DC 5 V.
- The analog output voltage, the higher the concentration the higher the voltage.
- The carbon monoxide detection with better sensitivity.
- With a long service life and reliable stability.
- Rapid response and recovery characteristics.
- Range: 10 to 1000 ppm.
₹142.00₹280.00inc.GST -
MQ-135 Air Quality Sensor MQ-135 Gas Sensor Detection Module For Arduino M2
- Power:2.5V ~ 5.0V
- Detecting Range: 10ppm-300ppm NH3 ,10ppm-1000ppm Benzene,10ppm-300ppm Alcohol
- Relative humidity:<95%RH
- Dimension: 40.0mm * 21.0mm
₹147.00₹400.00inc.GSTMQ-135 Air Quality Sensor MQ-135 Gas Sensor Detection Module For Arduino M2
₹147.00₹400.00inc.GST -
ULN2003 Driver Module Stepper Motor Driver Board
- ULN2003A motor driver chip
- Chip all the pins already leads for easy connection to use
- 5-12V power supply
- 4-way signal indicator
- Step angle: 5.625 x 1 / 64
- Reduction ratio: 1 / 64
- Phase: 4
- Current / Phase: 5V
₹45.00₹399.00inc.GSTULN2003 Driver Module Stepper Motor Driver Board
₹45.00₹399.00inc.GST -
LCD 20*4 Display
- Character Color: Black
- Supply voltage: 5V
- Dimensions: 98 x 60 x 12 (LxWxH) mm.
- 20 characters wide, 4 rows
- The module can easily interface with an MCU
- The module is a low-power consumption character LCD Module with a built-in controller
- Single LED backlight included can be dimmed easily with a resistor or PWM.
- Can be fully controlled with only 6 digital lines! (Any analog/digital pins can be used)
₹484.00₹700.00inc.GSTLCD 20*4 Display
₹484.00₹700.00inc.GST -
Push Button Switch 6x6x5 (Pack of 10)
- Ideal for Through-hole applications.
- Shaft Shape: Round
- Used in the fields of electronic products, household appliances and more.
-
High precision mechanism design offers acute operation and long service life.
-
Compact and lightweight, easy to carry and dismantling.
-
Good electrical conductivity.
- The long life of 300,000 cycles realized despite the high operating force
- Used in the fields of electronic products,
- household appliances and more.
₹25.00₹60.00inc.GSTPush Button Switch 6x6x5 (Pack of 10)
₹25.00₹60.00inc.GST -
₹59.00
₹100.00inc.GST 41% offSMD colour LED Module
₹59.00₹100.00inc.GST 41% off